Bhagwati Hardware & Mill Store

Chawri Bazar, Delhi

Made By : Luthra

Made In : Indian

Made By : Kris

Made In : indian

Model No. : Kris

Measuring Pin Gauge / Pin Gauge (Kris make)

(Best Quality Precision Measuring Pin Gauge)

• Made of High Quality Alloy Steel (EN31)
• Available in steps of 0.01mm, 0.02mm, 0.05mm
• Hardness : Heat treated to hardness of Rockwell 58 to 63 HRC
• Lapped to impart high surface finish.
• Mfg. Tolerance +/- 0.001 / 0.002mm on diameter
• Carefully packed in fancy wooden case for easy handling.
• For Extra safety pins will be provided in individual Plastic Containers upto 7mm.

Pines without knob(5mm length from above standard length is embedded into the knob)

• 0.5mm to 3.00mm Length 40mm
• 3.00mm and above Length 50mm

Four Sided Applicator

Made By : Mitutoyo

Made In : Japan

Model No. : Series 513

Made By : Luthra

Made In : Indian

Made Generally as per Is:6232-1971, made from good quality close grained with high Density Alloyed Cast Iron Castings conforming to Grade FG-220 of IS:210, Stress Relieved Hand Scraped Surface. Precision Box Angle Plates as per IS-6985-73 on request

Cross Hatch Cutter

Introduction

Cross hatch tester is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate.

When applied to multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made.

Packing List

2.11 X CarryingCase

2.21 X Cross Hatch Cutter & Handle ,

either :11mm spacing, 6 teeth

Or21mm spacing, 11 teeth

Or31.5 mm Spacing, 6 teeth

Or42mm spacing, 6 teeth

Or63mm spacing, 6 teeth

2.31 X Magnifier ( 5X)

2.41 X Tape ( 3M )

2.51 X Soft Brush

Specification

The Cross cutters Tester conform with the requirements of :

ISO2409-1992

GB/T9286-98

BS3900 E6

Made By : Insize

Made In : China

Digital Outside Micrometer

Features

Wet Film Thickness Wheel

Made By : Insize

Made In : China

Model No. : 3203 Series

Features

MULTIFUCTIONAL ILLUMINATED MAGNIFIERS, MAKE KRIS

UNDERSTANDING MAGNIFIER LAMPS

To many of us, magnification products are an essential part of our daily lives. No matter what the application is for, a magnifier enhances ones ability to Perform or enjoy a task or hobby. Some of the more common applications Where magnification if critical include: Reading & Writing, Jewellery Repairs and Production, Electronic Repairs and Production, Eyeglass repairs and Production, Scientific Studies , Sewing and Needlepoint, Embroidery , Model Building etc.

Magnifications :The degree to which the viewed object is enlarged. Magnification Is usually expressed by a number followed by an , the symbol used to express Power or the size of the object in relationship to its actual size.

The formula for Calculating magnification power is :

MP = dioptre / 4 + 1

Example : A 40d lens has a MP of 11 or the object is 11 times larger.

True Color Lens :Many magnifying glasses today are made from materials that Come naturally with a greenish tint. This distorts the natural color of the object. Our true color lens uses a special material so as to eliminate any color changes That is causes by the glass itself and provides near perfect color rendition. This Type of lens is specially suited for medical or professional applications.

TIPS ON PROPER USE OF A MAGNIFIER

To take best advantage of the comforts built into illuminated magnifier, please Keep points in mind :

1. Use both eyes.

2. Position the lens so that it is a proper distance from the work area, yet Close enough to your eyes ( about 8 to 10) so that you have the maximum magnification without distortion. Do not lean back away from the lens to Increase magnification.

3. Chair height and work surface should be positioned so the operator can Maintain good posture while working.

We offer a vast range of superior quality bench centres, which are extensively used for general inspection work in metrology laboratories and other industries. Our range includes cast iron bench centre, mini bench centre , vertical bench centre, universal bench centre and many other. These bench centres are known for delivering better durability, reliability and performance in the defined operations. Further, we also customize these bench centres as per the specific demands of clients.
Our range of bench centres includes cast iron bench centre, vertical bench centre, mini bench centre cast iron base, mini bench centre granite base, universal bench centre, surface plate with bench centre and bench vise.

Backed by a team of experts, we are offering a qualitative range of cast iron bench centers that are accurate and quick method for inspecting radial run out of camshafts, crankshafts and cylindrical shafts. Manufactured as per IS: 5980-1978, these cast iron bench centers are utilized in machine shops, tool rooms and standard rooms for checking various parameters such as concentrically , parallelism and true rotation of components. The bench centers manufactured at our works are made up of close grained cast iron and finished to higher degree of accuracy by hand scrapping.

Made By : Luthra

Made In : Indian

Made By : Oppama Japan

Made In : Japan

Model No. : PET-2000DX

Oppama Industrial Co. Ltd. - Japan

Mount Type Engine Tachometer, Oppama (Japan)

This Tachometer is new version of old PET-2000 and can measure engine RPM, maximum RPM, total cumulative operating time resetable cumulative operating time. This has dual display system for eigher current RPM alone or current and maximum RPM and also has tow maximum RPM memories for comparison.

LA SERIESOUTSIDE MEASURING OF ODS AND THICKNESSES
The Long Dial Caliper Gauge show its great power in measurement of inside and outside sizes. wall thickness, groove width and hole diameters and any other shapes and section that is not apparently accessible.

Made By : Imada

Made In : Japan

Model No. : LC

Introduction

Made By : Niigataseiki

Made In : Japan

Model No. : Levelnic DL-M1