Our Products
Bhagwati Plastic & Pipe Industries introduces inline emitting pipe system for better irrigation of plants at very low cost and with scarce of water. This product confirms to Indian Standards as per IS:13488-2008 & IS:12786-1989 This is an integral pipe system (in-built) in which the emitters are inserted in the laterals during the extrusion process at preset distances.
Salient Features :
Application : All field crops like Sugarcane, Cotton, Strawberry, Grapes, Carnations, Floriculture, Banana, Pineapple, Vegetables, Tea gardens, Green houses etc.
Recommendations : Maximum recommended drip line length in meters on flat terrain at a pressure of 1 kg / cm² diameter 12 mm & 16 mm.
Details
Diameter (mm) | Class | Pressure rating (kgf/cm²) |
Average wall thickness (mm) |
---|---|---|---|
12 | 3 | 2.5 | 1.1 |
3 | 4 | 1.2 | |
16 | 1 | 1 | 0.8 |
2 | 1.25 | 0.9 | |
3 | 2.5 | 1.3 |
Technical Specification
Dripper Spacing (mm) |
20 | 30 | 40 | 50 | 60 | 75 | 90 | 100 | 150 | ||
---|---|---|---|---|---|---|---|---|---|---|---|
Maximum | 16mm | 2LPH | 40 | 62 | 72 | 89 | 102 | 116 | 127 | 127 | 188 |
Extendable | 16mm | 4LPH | 25 | 35 | 44 | 52 | 59 | 70 | 78 | 78 | 111 |
Lateral Length | 12mm | 2LPH | 22 | 31 | 38 | 46 | 53 | 63 | 71 | 71 | 103 |
Agronomists all over the world believe that the sprinkler irrigation system is the best method to get maximum yield at an extremely low cost. Using sprinkler system can irrigate 2 to 3 time more farm land with same quantity of water. The sprinkler system cleans the surface of the plants, which help in easy photosynthesis thus making plants able to produce more. It save from irregularities of the weather. In winters it saves from freezing of water. In summers it saves evaporation of water up to 40 %. The Sprinkler effect (like rain)saves water from flowing away and maximum water reaches to the roots of the plants. It spreads water around the farm in equal quantity thus saving plants from bad effects of water clogging and water scarcity. With Sprinkler Irrigation System farming can be done easily on uneven surfaces.
Construction : HDPE High Density Polyethylene is the most popular variety of polymers. Ambika sprinkler pipe is made of HDPE plastic material. It is the recommended material for the manufacture of high pressure pipes and is renowned world wide for its reliability. The characteristics that makes it outstanding are its toughness, its resistance to chemical attack and its immunity to weather conditions. This makes it an excellent material to convey water.
Size Range :
Technical Specification
Outside Diameter |
Nominal Tolerance on outside Diameter |
Ovality | Wall Thickness | |||||||
Class1 (2.5 kgf/cm2) | Class2 (3.2 kgf/cm2) | Class3 (4 kgf/cm2) | Class4 (6 kgf/cm2) | |||||||
Min | Max | Min | Max | Min | Max | Min | Max | |||
40 | 0.4 | 1.4 | -- | -- | -- | -- | -- | -- | 2.3 | 2.3 |
50 | 0.5 | 1.4 | -- | -- | -- | -- | 2.0 | 2.4 | 2.9 | 2.9 |
63 | 0.6 | 1.5 | -- | -- | 2.0 | 2.4 | 2.5 | 2.9 | 3.8 | 3.8 |
75 | 0.7 | 1.6 | 2.0 | 2.4 | 2.5 | 2.9 | 3.0 | 3.4 | 4.5 | 4.5 |
90 | 0.8 | 1.8 | 2.2 | 2.6 | 2.9 | 3.4 | 3.5 | 4.1 | 5.3 | 5.3 |
110 | 1 | 2.2 | 2.7 | 3.2 | 3.4 | 3.9 | 4.2 | 4.8 | 6.5 | 6.5 |
125 | 1.2 | 2.5 | 3.1 | 3.6 | 3.8 | 4.5 | 4.8 | 5.5 | 7.4 | 7.4 |
140 | 1.3 | 2.8 | 3.5 | 4.1 | 4.3 | 5.0 | 5.4 | 6.1 | 8.3 | 8.3 |
160 | 1.5 | 3.2 | 3.9 | 4.5 | 4.9 | 5.5 | 6.2 | 7.0 | 9.4 | 9.4 |
180 | 1.7 | 3.6 | 4.4 | 5.0 | 5.5 | 6.3 | 6.9 | 7.8 | 10.6 | 10.6 |
200 | 1.8 | 4 | 4.9 | 5.6 | 6.1 | 7.0 | 7.7 | 8.7 | 11.8 | 11.8 |
SprinklerIrrigation is a method of applying irrigation water which is similar to rainfall. Water is distributed through asystemof pipes usually by pumping. It is then sprayed into the air and irrigated entire soil surface through spray heads so that it breaks up into small water drops which fall to the ground.