We are offering Three Knife Trimmer especially useful for diaries and notebooks manufacturers. This machine cut the diaries and note books from three side in one stroke.

Three knife trimmer especially useful for diaries and notebooks manufacturers. This machine cut the diaries and note books from three side in one stroke.

Twin Book Press is a special Purpose Systems for Book Binding for Finishing of Hard-cover/perfect-bound Books, Diaries, Dictionaries & Directories Etc. Hydraulic Book Press Tbp-l & Ii with Two Independent Stations with Fixed Pile Height upto 400mm. Pile Height Can Be Adjusted By Turning Any of the Two Handle Bars (optional) for Moving the Upper Pressing Plate to the Required Day-light Area. the Printed Title Can Be Pasted On Open book Size Up to 635x455mm/810x525mm with Single Platen & Day-light Area upto 400mm. The Press Can Be Used Either in Manual or Auto-mode with Each Station. alternatively or Together, Resetting to Loading Position After Pre-set Time. The Option to Set Time On a Digital Timer in 'seconds or Minutes' Increments upto 99 Minutes. The Options Available for Use are

• Independent Control Through Separate Switch for Left and Right Hand Side Platens Through Selector Position No. 1
• By Selecting the 2 Position, the Stations (platens) Will Operate in Tandem to a Pre-set Duration in Auto-mode.
• Ln Selector Position '1 & 2' Both the Platens Will Move Up Simultaneously with Combined Force of 12000 Kgs. Single Platen Supplied for Pressing Books, Account Ledgers & Book Cases Etc. of Large Formats.
• Hydraulic System is Based On 2 Hp Power Pack and Pressing Force Adjustable upto 6000 Kgs On Each Station.

We are a well-known Edge Squaring Press Manufacturer and Supplier. Edge Squaring Press, which we offer, is a special purpose system for book binding. The Edge Squaring Press is widely demanded for finishing of hard-cover/perfect-bound books, diaries, dictionaries & directories, etc. The Edge Squaring Press can be operated in manual, semi or auto modes. The squaring mechanism of Edge Squaring Press can also operate in single or double strokes. Process Of Edge Squaring PressThe process of Edge Squaring the centre stitched/sewn books was introduced and accepted by the converters/stationery manufacturers. The need of production requirement has resulted in the Edge Squaring Press 3 up exercise note books upto a width of 800 mm, two sets of exercise note books (composition books/centre thread-sewn or center wire-stitched) with heavy duplex board as title can be processed in less than 3/4secs. The squaring finish can be precisely set to meet demanding requirements. The clamping and squaring pressure can be adjusted to suit the paper/board and thickness of the note books. PLC based control panel for sequencing best reliability and simplified.

We have gained complete customers satisfaction as we make maintain proper schedules for the delivery of the consignments Headquartered in New Delhi(India), we are making available high quality products to every nook and corner of the country.

We are offering Nipping Press that is special purpose system for book binding for finishing of hard-cover/perfect-bound books, diaries, dictionaries & directories, etc. The PLC based control panel of Nipping Press is for the best reliability and simplified diagnostics. The high speed blower/exhaust fan of Nipping Press ensures that the ambient temperature in the power pack area is maintained. The latest hydraulic technology and controls of the Nipping Press makes it possible to process 700/800 books (single book-block upto 30mm spine thickness) per hour. Nipping Press

• A process of reducing/knocking out the swell in the spine of thread-sewn book-blocks or gathered folded-forms (signatures) being prepared for hard-case or soft cover/perfect binding.
• Ensures the book-blocks are rectangular in shape and free from extreme gradients in the folded/sewn area for quality and enhanced life of the book.

Other Operator Features

• Selection of Manual or Semi-auto mode
• Counter for number of Book-blocks processed
• Dedicated switches for Clamping and Nipping functions in Manual Mode
• Emergency Switch and Recycle Push Buttons are easily located on the Top Cover.
• Emergency Switch ends the cycle and resets the machine to starting position.

For Operator's Safety

• Both the push buttons are required to be pressed simultaneously for initiating the cycle.
• An intricate safety device is incorporated as further protection in case of failure of recycle switches once operator's hands are in the way of the clamping area.

Joint Forming Press is a Special Purpose Systems for Book Binding for finishing of Hard-Cover/Perfect-Bound Books, Diaries, Dictionaries & Directories etc. Pressing of cased- in books and simultaneous burning-in of the JOINTS for forming perfect hinge and permanent shape with the help of temperature-controlled pressure blades (Joint Forming Bars) for Flat or Rounded Bookback. These blades are spring loaded for adjusting to different depth of joints automatically and hydraulic pressure can be set from 100-300 / 400kgs to achieve the desired results. The bars are supplied for Flat and Rounded Spine Book-backs respectively. Temperature of the blades is set through Digital Temperature Controller (PID) to suit properties of Glue (Adhesive), Binding material and Operating speed. The PLC enables choice of single or multiple stroke/s for accurate control of buming-in the Joints and consistent results. Counter on PLC indicates number of books processed at he end of each cycle. The system automatically releases the book on completion of the set timing cycle. Back-gauge (Setting handle mounted on the front panel) is provided for faster make-ready production ; Light guide indicates the Joint Forming position and also reduces the make-ready time. Adequate operator safety device in addition to emergency switch incorporated. PLC based control panel for optimum reliability and simplified diagnostics. Heating for platens (optional) with thermostatic control (PID) to expedite the settings of cased-in Books.

Three Knife Trimmers IS A special Purpose Systems for Book Cutting Machine for Finishing of Books, Diaries, Dictionaries & Directories Etc. We have Launched Three Knife Trimmers Especially Useful for Diaries, Books, Dictionaries Etc. This Machine Cut the Diaries and Books from Three Side in One Stroke. this Machine Will Be Operating Manually. We Can Cut the Diaryes and Books Up to 305mm We Can Increase the Size On Demand the Hydraulic Technology and Control Make It Possible to Process 600 Strokes in An Hour. The Knife Setting is Done Through Bush Button By Manually for Operators Safety Purpose We have Installed Sensor & Push Button are Required to Be Processed Simultaneously. Emergency Switch and Push Buttons are Located Conveniently On the Top Cover. in Case of An Accident or if the Process Needs to Be Cancelled Midway the Emergency Switch Aborts the Cycle.

We are offering Three Knife Trimmer especially useful for diaries and notebooks manufacturers. This machine cut the diaries and note books from three side in one stroke.

Three knife trimmer especially useful for diaries and notebooks manufacturers. This machine cut the diaries and note books from three side in one stroke.

Twin Book Press is a special Purpose Systems for Book Binding for Finishing of Hard-cover/perfect-bound Books, Diaries, Dictionaries & Directories Etc. Hydraulic Book Press Tbp-l & Ii with Two Independent Stations with Fixed Pile Height upto 400mm. Pile Height Can Be Adjusted By Turning Any of the Two Handle Bars (optional) for Moving the Upper Pressing Plate to the Required Day-light Area. the Printed Title Can Be Pasted On Open book Size Up to 635x455mm/810x525mm with Single Platen & Day-light Area upto 400mm. The Press Can Be Used Either in Manual or Auto-mode with Each Station. alternatively or Together, Resetting to Loading Position After Pre-set Time. The Option to Set Time On a Digital Timer in 'seconds or Minutes' Increments upto 99 Minutes. The Options Available for Use are

• Independent Control Through Separate Switch for Left and Right Hand Side Platens Through Selector Position No. 1
• By Selecting the 2 Position, the Stations (platens) Will Operate in Tandem to a Pre-set Duration in Auto-mode.
• Ln Selector Position '1 & 2' Both the Platens Will Move Up Simultaneously with Combined Force of 12000 Kgs. Single Platen Supplied for Pressing Books, Account Ledgers & Book Cases Etc. of Large Formats.
• Hydraulic System is Based On 2 Hp Power Pack and Pressing Force Adjustable upto 6000 Kgs On Each Station.

We are a well-known Edge Squaring Press Manufacturer and Supplier. Edge Squaring Press, which we offer, is a special purpose system for book binding. The Edge Squaring Press is widely demanded for finishing of hard-cover/perfect-bound books, diaries, dictionaries & directories, etc. The Edge Squaring Press can be operated in manual, semi or auto modes. The squaring mechanism of Edge Squaring Press can also operate in single or double strokes. Process Of Edge Squaring PressThe process of Edge Squaring the centre stitched/sewn books was introduced and accepted by the converters/stationery manufacturers. The need of production requirement has resulted in the Edge Squaring Press 3 up exercise note books upto a width of 800 mm, two sets of exercise note books (composition books/centre thread-sewn or center wire-stitched) with heavy duplex board as title can be processed in less than 3/4secs. The squaring finish can be precisely set to meet demanding requirements. The clamping and squaring pressure can be adjusted to suit the paper/board and thickness of the note books. PLC based control panel for sequencing best reliability and simplified.

We have gained complete customers satisfaction as we make maintain proper schedules for the delivery of the consignments Headquartered in New Delhi(India), we are making available high quality products to every nook and corner of the country.

We are offering Nipping Press that is special purpose system for book binding for finishing of hard-cover/perfect-bound books, diaries, dictionaries & directories, etc. The PLC based control panel of Nipping Press is for the best reliability and simplified diagnostics. The high speed blower/exhaust fan of Nipping Press ensures that the ambient temperature in the power pack area is maintained. The latest hydraulic technology and controls of the Nipping Press makes it possible to process 700/800 books (single book-block upto 30mm spine thickness) per hour. Nipping Press

• A process of reducing/knocking out the swell in the spine of thread-sewn book-blocks or gathered folded-forms (signatures) being prepared for hard-case or soft cover/perfect binding.
• Ensures the book-blocks are rectangular in shape and free from extreme gradients in the folded/sewn area for quality and enhanced life of the book.

Other Operator Features

• Selection of Manual or Semi-auto mode
• Counter for number of Book-blocks processed
• Dedicated switches for Clamping and Nipping functions in Manual Mode
• Emergency Switch and Recycle Push Buttons are easily located on the Top Cover.
• Emergency Switch ends the cycle and resets the machine to starting position.

For Operator's Safety

• Both the push buttons are required to be pressed simultaneously for initiating the cycle.
• An intricate safety device is incorporated as further protection in case of failure of recycle switches once operator's hands are in the way of the clamping area.

Joint Forming Press is a Special Purpose Systems for Book Binding for finishing of Hard-Cover/Perfect-Bound Books, Diaries, Dictionaries & Directories etc. Pressing of cased- in books and simultaneous burning-in of the JOINTS for forming perfect hinge and permanent shape with the help of temperature-controlled pressure blades (Joint Forming Bars) for Flat or Rounded Bookback. These blades are spring loaded for adjusting to different depth of joints automatically and hydraulic pressure can be set from 100-300 / 400kgs to achieve the desired results. The bars are supplied for Flat and Rounded Spine Book-backs respectively. Temperature of the blades is set through Digital Temperature Controller (PID) to suit properties of Glue (Adhesive), Binding material and Operating speed. The PLC enables choice of single or multiple stroke/s for accurate control of buming-in the Joints and consistent results. Counter on PLC indicates number of books processed at he end of each cycle. The system automatically releases the book on completion of the set timing cycle. Back-gauge (Setting handle mounted on the front panel) is provided for faster make-ready production ; Light guide indicates the Joint Forming position and also reduces the make-ready time. Adequate operator safety device in addition to emergency switch incorporated. PLC based control panel for optimum reliability and simplified diagnostics. Heating for platens (optional) with thermostatic control (PID) to expedite the settings of cased-in Books.

Three Knife Trimmers IS A special Purpose Systems for Book Cutting Machine for Finishing of Books, Diaries, Dictionaries & Directories Etc. We have Launched Three Knife Trimmers Especially Useful for Diaries, Books, Dictionaries Etc. This Machine Cut the Diaries and Books from Three Side in One Stroke. this Machine Will Be Operating Manually. We Can Cut the Diaryes and Books Up to 305mm We Can Increase the Size On Demand the Hydraulic Technology and Control Make It Possible to Process 600 Strokes in An Hour. The Knife Setting is Done Through Bush Button By Manually for Operators Safety Purpose We have Installed Sensor & Push Button are Required to Be Processed Simultaneously. Emergency Switch and Push Buttons are Located Conveniently On the Top Cover. in Case of An Accident or if the Process Needs to Be Cancelled Midway the Emergency Switch Aborts the Cycle.