Benson Medical India

Udyog Vihar, Gurugram, Haryana

• A sturdy trolley with a Suction Controller and Twin Suction Jar with changeover valve, for use in Operating Theatres
• The unit can be fitted with either a Diamond Suction Unit or the Original style unit.
• The Trolley is 3 tall with a movement handle, and a five castor base for stability
• The Suction unit is fitted to the Trolley at an upward inclination for increased visibility.
• The unit is supplied with 5M High Pressure Suction hose and an indirect probe.
• The Standard unit is supplied with Twin Jars, but alternatives are available up to four jars, or without jars, according to customer preference
• The unit is supplied with a seven year warranty.
• The unit is CE Marked

• A range of Electric Suction Units generally mounted on Castors with a large handle containing a Catheter Park
• The Suction Valve is of the modern design which allows full adjustment of vacuum by means of a control mechanism, as against the old atmospheric venting system.
• The unit cannot operate without a Hydrophobic Filter. This prevents potential; contamination of the electric motor, if the jar is overfilled or the unit is operated incorrectly.
• The unit is available in Mains, Battery, or Mains/Battery mode, and can be supplied with either 240V or 110V motors
• The standard mains model operates within the suction range 0 80 Kpa
• The model comes with a single or Twin Suction Jar. The Suction is controlled by means of an adjustment bonnet
• The unit is supplied with a two year warranty
• The unit is CE Marked

• The Ward Vacuum Unit Unit has been on the market for almost 20 years. The design has now been superseded by the Diamond Range Suction, but the old style Suction remains available.
• The Unit is available in three types-
• High 0 to -80 kPa
• Low 0 to -20 kPa
• Thoracic 0 to -4 kPa
• All types are available either with Direct or Rail Mounted fittings
• All can be used with any type of Suction Collection Jar
• The High and Low models are supplied with a Hydrophobic Pipeline Protector, for pipeline contamination protection.
• The Thoracic unit is supplied with a standard filter and float
• The units are supplied with a seven year warranty
• The unit is CE Marked
• A New for Old service is available to all UK Hospitals to enable the exchange of old units at advantageous prices

• Double O-ring seal between the front and back bodies support 10 lbs at 2 inches without leaking
• Double O-ring seal may be replaced without having to shut down the gas service
• Durable, protective, scratch resistant vinyl label
• Brass secondary check poppet (not plastic)

• ETL Listed to UL 1331 and CSA Z9170-1.
• Conforms to NFPA 99 and CGA standards
• Accepts Allied Chemetron gas specific compatible male adaptors
• Gas specific indexing
• Removable front assembly
• All outlets are 100% tested for flow and leaks
• Nameplate color coding per NFPA 99
• 360 swivel inlet tube
• Metal back and nameplate
• Strength of connections provides support for dispensing equipment without the use of additional brackets.

Genesys manifold systems lead the industry in reliability and innovative features: transducers instead of pressure switches, 400 psig pressure differential rated solenoid valve(s), easy to service 2D layouts and union fittings before and after all serviceable components. In addition they are designed to allow the manifold cabinet to be converted in the field (i.e.- from standard flow to high flow or from cylinder by cylinder use to liquid by cylinder or liquid by liquid). These design features: improve safety, reduce gas manifold system costs, make the units easy to service and provide the utmost in reliability.

• Fully automaticno resetting of valves or levers
• Input power 120 VAC, 50 to 60 Hz-single point connection
• 400 psig differential rated solenoidcant lock up
• 72 fle xible pigtail (for portable bulk or bulk connection)
• Economizer circuits for maximum efficiency of gas use
• Unit of measure switching (psi, kPa, BAR).
• Dual line pressure regulators
• Built for expansion by adding header extensions.
• Cabinet weight 75 lbs.
• May be converted from low or medium pressure liquid portable bulk vessel use to use with high pressure cylinders.
• Line pressure sensor may be mounted inside the cabinet or remotely located to eliminate the need for a high/low pressure switch for master alarm operation
• Five year warranty

RWP & RSP systems are designed for level I and level II installations requiring a permanent back-up or emergency reserve manifold system. All systems are cleaned for use with oxygen in accordance with CGA G4.1, tested and built in accordance to Compressed Gas Association (CGA) and National Fire Protection Association (NFPA 99) guidelines.

• Model SR450 series regulator included
• Manifold outlet is 1/2 M NPT
• High quality brass master shut-off valve included
• Oxygen models include rigid copper pigtails 36 single loop design
• Flexible stainless steel Teflon lined pigtails provided with all other gas services.
• Staggered & vertical crossover headers include 24 and 36 flexible stainless steel pigtails
• Maximum pressure 3, 000 psig
• Wall mounting brackets included
• Built to accommodate future expansion by adding optional header extensions.

Genesys medical gas manifold systems lead the industry in reliability and innovative features: transducers instead of pressure switches, 400 psig pressure differential rated solenoid valve(s), easy to service 2D layouts and union fittings before and after all serviceable components. In addition they are designed to allow the medical gas manifold cabinet to be converted in the field (i.e.- from standard flow to high flow or from cylinder by cylinder use to liquid by cylinder or liquid by liquid). These design features: improve safety, reduce manifold system costs, make the units easy to service and provide the utmost in reliability

• Adjustable single stage line regulator 0 125 and0 200 psig
• Flexible stainless braided pigtails (except Oxygen service rigid copper pigtails provided per NFPA 99)
• CGA gas specific pigtail connections
• Complete system cleaned for use with Oxygen
• Cylinder contents gauge and delivery pressure gauge included
• Outlet connection 1/4 Male NPT
• Wall mounting bracket included
• Maximum inlet pressure 3, 000 psig
• Optional remote audio visual alarm
• Five year warranty

In addition to our 5-year warranty and being made in the U.S.A. Tri-Tech medical gas terminal units incorporate several features which make them superior to our competitors terminal units for medical gas designs:

• Double O-ring seal between the front and back bodies support 10 lbs at 2 inches without leaking,
• Double O-ring seal may be replaced without having to shut down the gas service
• Durable, protective scratch resistant vinyl label
• Brass secondary check poppet (not plastic)

Medical gas terminal units are available in DISS, Ohmeda, Chemetron and Puritan Bennett compatible connection styles and in wall, console, ceiling, surface and surgical arm mounting configurations.Terminal units for medical gas pipeline systems are ETL listed to UL 1331 and conform to NFPA 99 and CGA standards. All terminal units for medical gas are tested 100% for flow and leaks and have metal back and nameplates. All terminal units for compressed medical gases and vacuum except the surface mounted models have a 360 swivel inlet tube.

Rely on BensonMedical Inc. to provide you with the right medical gas ball valves with extensions for your application!

Features of Medical Gas Ball Valves

• NFPA 99 compliant 3 piece, full port turn
• Dual ported
• Includes type K copper extensions and locking handles
• Sizes 4
• Working pressure rating of 600 psi WOG (29 in/Hg vacuum)
• Cleaned for use with oxygen in accordance with CGA G-4.1

• Meets NFPA 99 standard
• 3 piece in-line easy to service
• Dual gauge/purge ports1/8 FNPT
• Full port turn ball valve
• Cleaned for Oxygen service
• Adjustable packing with blow-out proof stem
• Working pressure rating of 600 psi WOG (29 in/Hg vacuum)
• Conforms to MSS SP-110
• Available in sizes 3
• Bronze body
• Type K copper tube extensions
• Optional locking handles available
• 100% tested
• Made in the U.S.A.
• Five year warranty

BensonMedical master alarm panels are designed with state of the art technology for the utmost in safety and reliability.

• Up to128 alarm points per panel (8 points per circuit board)
• Alarm points may be programmed individually, NC or NO or Disabled
• Datafileof NFPA 99 alarm labels pre-loaded into each board
• Design options available to communicate with dry contact, transducer and 4 20 mA sensors
• Wireless master alarms available
• Built-in history feature
• Five year parts and one year labor warranty

BensonMedical area alarms panels are designed with state of the art technology for the utmost in safety and reliability.

• Up to 16 gas models per panel
• Transducers may be remotely installed up to 5, 000 feet
• Do not require recalibration
• Built-in History feature
• System alarms for disconnected or cross-connected transducer, transducer failure

Medical Gas Area Alarms Panel Features:

The Bensonmedical gas alarm panel digitally displays gas pressure and monitors and displays normal and alarm conditions for up to 16 medical gases. Transducers are included and may be mounted in the alarm back box or remotely.

• ETL listed to UL-1069 and CSA-C22.2 No. 205
• Complies with NFPA 99. Made in the U.S.A.
• Individual 2.85 LCD touch screen display for each gas service
• Emergency preparedness instructions may be input for each gas service and will be displayed during an alarm event
• Optional Ethernet board (may be added after installation) provides; text or email notification to 5 mobile devices of an alarm event, website with real-time graphic of alarm panel status with access to event logs, event log for up to 1, 000 events, modbus interface gateway for communication with facilities building management system.
• Self-diagnostic (test button) and error message display for ease of maintenance.
• Audio and visual alarm indicators
• Up to 4 area/gas boards in a two, 8 in a three slot and 16 in a 5 slot panel.
• Constant display and monitoring of each gas
• User programmable high/low set points
• Dry contacts for remote monito ring of all alarm conditions on each gas module and on the CPU module for the entire panel
• Alarm history display of previous alarm conditions
• Easy to read color coded gas modules
• Hinged frame with lanyards for easy accessibility
• Five year parts and one year labor warranty

Our DISS medical gas outlets incorporate several design features which make them superior to our competitors outlet designs:

• Frontall front-loaded feature easy to service, saving time and money
• Double O-ring seal between the front and back bodies support 10 lbs at 2 inches without leaking
• Double O-ring seal may be replaced without having to shut down the gas service
• Durable, protective, scratch resistant vinyl label
• Brass secondary check poppet (not plastic)

The Frontall DISS medical gas console, medical gasheadwall outlets, medical gas terminal units represent the most technically advanced means of providing medical gas connections to the central piping system. The outlets incorporate a unique front-loaded valve cartridge feature which makes our medical gas outlets easy to repair, saving valuable time and money for the health care facility.

• ETL Listed to UL 1331 and CSA Z9170-1.
• Conforms to NFPA 99 and CGA standards
• Accepts DISS gas specific nut & nipple sets
• Ease of maintenance without removing the faceplate using a cartridge insertion tool.
• Pin indexed faceplate and back
• Removable front assembly
• All outlets are 100% tested for flow and leaks
• 360 swivel inlet tube
• 14 gauge metal back and nameplate

Provides support for dispensing equipment without the use of additional brackets

Our Puritan medical gas outlets incorporate several design features which make them superior to our competitors outlet designs:

• Double O-ring seal between the front and back bodies support 10 lbs at 2 inches without leaking
• Double O-ring seal may be replaced without having to shut down the gas service

• Durable, protective, scratch resistant vinyl label
• Brass secondary check poppet (not plastic)

Puritan Medical Gas Outlets Features

• ETL Listed to UL 1331 and CSA Z9170-1.
• Conforms to NFPA 99 and CGA standards
• Accepts Puritan gas specific compatible male adaptors
• Gas specific indexing
• Removable front assembly
• All outlets are 100% tested for flow and leaks
• Nameplate color coding per NFPA 99
• 360 swivel inlet tube
• Metal back and nameplate
• Strength of connections provides support for dispensing equipment without the use of additional brackets.