Bellhydromatics

Angol, Belgaum, Karnataka

We are offering crg series check valves.Valve size: 01 (18")coil type: acfeatures: high flow rates up to 63 lpm (16.6 usgpm)high max. Operating pressures up to 315 bar (4500 psi)long service life up to 50 million spool shifts and no oil leaks

We are offering relief modular valves.Features this balanced piston type relief modular valve is an improvement over the conventional type relief valve.the valve is designed to control the maximum pressure of the hydraulic circuit and also serves as a safety valve.it can provide normal performance in a wide range of operating pressure from 8 up to 250 bar.back pressure in tank port should be as low as possible (under 5 bar)in case the valves are used as safety valves, pressure setting should be higher than max. Circuit pressure by 1015 bar.the pressure will be increased when the pressure adjustment handle is turned clockwise, and will be reduced when the pressure adjustment handle is turned counter-clockwise.be sure to re-tighten the lock nut firmly after making adjustment to the pressure. [!vmcatalogdiv] [!vmcatalogdiv class=clear-fix] [!vmcatalogdiv id=product-tabs]

We are offering reducing modular valves.Features this valve is employed to keep the pressure of some circuit lower than the main circuit pressure.drain port should be connected to tank.pressure difference between primary pressure and secondary pressure should be maintained over then 10 bar for good pressure reduction.pressure cannot be adjusted if a certain flow rate cannot be obtained.the pressure will be increased when the pressure adjustment handle is turned clockwise, and will be reduced when the pressure adjustment handle is turned counter-clockwise.be sure to re-tighten the llock nut firmly after making adjustment to the pressure. [!vmcatalogdiv] [!vmcatalogdiv class=clear-fix] [!vmcatalogdiv id=product-tabs

We are offering throttle modular valves.Features the flow will be decreased when the flow adjustment handle is turned clockwise, and will be increased when the flow adjustment handle is turned counter-clockwisebe sure to re-tighten the lock nut firmly after making adjustment to the flow. [!vmcatalogdiv] [!vmcatalogdiv class=clear-fix] [!vmcatalogdiv id=product-tabs] ratingsmsp*ordering code [!vmcatalogdiv id=tab-1] [!vmcatalogdiv style=margin-top:40px;]