Product / Services
Post Buy Requirement
BF

BEDA Flow Systems Pvt. Ltd.
Sector 11, Noida, Uttar Pradesh

Write a Review
Call Now Call Now

Our Products

  1. Coupling 6 Products available
  2. Industrial Pump 3 Products available
  3. Kitchen Container 3 Products available
  4. Domestic Fans, AC & Coolers 3 Products available

  5. Metal Tank

    2 Products available

  6. Clutches, Clutch Parts & Accessories

    1 Products available

  7. Measuring Instruments & Equipment

    1 Products available

  8. Heat Exchanger Parts

    1 Products available

  9. Bearings

    1 Products available

  10. Calibrators And Monitoring Systems

    1 Products available
  11. Others Products 10 Products available

Other Products / Services

Our offered Product range includes Delivery pumps, Delivery pump units, Agitator drives, Aluminium cleaning covers and Incorporators.

Electronic Pressure Switch

Electronic Pressure Switch
SUCO offers a wide range of electronic pressure switches, which are available as normally open (NO) or normally closed (NC) versions. An electronic pressure switch converts the medium pressure which is present at the measuring cell into a digital, electrical switch signal (ONOFF). An electronic pressure switch is more complex than a mechanical pressure switch, and thus generally more expensive. As an electronic pressure switch has no moving parts (relative to each other), it usually has a much prolonged service life and provides a higher level of precision (depending on application). The hysteresis can be set over a wide range and virtually independently of the switching point. Electronic pressure switches can also be equipped with additional functions, such as optical displays and menu control.
View Complete Details
Ask Latest Price & Details
External Gear Pumps

External Gear Pumps
  • Speed range 10 to 1, 750 rpm
Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. The basis of its success stems from a platform of customisation that rivals even the most competent competitors. Available in cast iron and stainless steel bodies, the ZPD flaunts 43 displacement sizes, 5 shaft seal options and multiple bearing and wear plate choices. ZPD gear pumps are specifically used for wide flow range metering applications and transfer applications. Volumetric efficiency values of over 90 % are typically achieved.
View Complete Details
Ask Latest Price & Details
plastic canisters

Plastic Canisters
  • Temperature range -20°C up to +80°C
Chemical resistance: it depends on the type of plastic and the medium, Pressure range: low vacuum up to 6 bar (6 bar assured up to a temperature of 20C), Pressure and heat resistance: high expansion, Advantages: no eddy currents, strong.
View Complete Details
Ask Latest Price & Details
phe pump

Phe Pump
The heating surface of the DOC Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled, The sturdy connection blocks allow high fastening torques for assembling.
View Complete Details
Ask Latest Price & Details
Flow plate

Flow Plate
The heating surface of the DOC Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled
View Complete Details
Ask Latest Price & Details
bell housing

Bell Housing
HBE Bellhousings function as connection elements between IEC electric and petrol motors and hydraulic pumps. They are available for nearly all hydraulic pumps and in all sizes ex stock at short times. Users can choose between a rigid (form A) and a noise absorbing model (form B) according to VDMA 24561. The standard versions are made of aluminium, but are also available in steel and stainless steel.
View Complete Details
Ask Latest Price & Details
Aluminium foot brackets

Aluminium Foot Brackets
HBE aluminium foot brackets are suitable for the horizontal installation of motor, bellhousing and pump and allow a separate assemblydisassembly of motor and pump. The series PTFL is a lightweight and space saving construction, the series PTFS has been designed as a heavy line especially for multiple pumps.
View Complete Details
Ask Latest Price & Details
air cooler

Air Cooler
HBE oil-air coolers have been designed for a fast cooling in return lines of hydraulic systems. They are featuring an especially low-noise operation as well as a high cooling performance. The oil-air coolers are available in different sizes.
View Complete Details
Ask Latest Price & Details
Bellhousing cooler

Bellhousing Cooler
The Series PT'K round bell housing with integrated oil air cooler has been designed for electrical motors with 0.55 up to 22 kW and allows a high cooling capacity with low noise output on the smallest installation space.
View Complete Details
Ask Latest Price & Details
Internal Gear Pump

Internal Gear Pump
Internal gear pump, Thanks to internal gear wheels, the gear pump ZPI allows an especially low-noise conveying of the fluid which not only reduces the noise emission but also the costs for noise-absorbing measures. Furthermore, the high volumetric efficiency of the ZPI internal gear pump has a positive effect on the energy balance due to the improvement of the overall efficiency.
View Complete Details
Ask Latest Price & Details
Stainless Steel Canisters

Stainless Steel Canisters
Standard stainless steel canisterMaterial: Hastelloy (1.45712.4610)Chemical resistance: goodPressure range: vacuum up to 25 bar (as a special solution possible up to 300 bar)Temperature range: -190C up to +350CPressure and heat resistance: average resistanceAdvantages: customized solutions very easy to realize, very solid, different materials
View Complete Details
Ask Latest Price & Details
Turbine Flow Meter

Turbine Flow Meter
  • Flow range 110 l/h up to 4, 500 m³/h
  • Temperature range – 40°C up to +120°C
Turbine flow meter, Turbine flow meters are precise and reliable measuring equipment, designed for varied applications. Basically, the VTR series consists of a rotor, the housing and the measurement pick-up. As a result of the specific inner diameter, the turbines revolutions are directly proportional to the flow. VTR flow meters can be installed even under the harshest application conditions including oil, petrochemical and chemical industries as well as other industrial sectors. All VTR flow meters are individually calibrated.
View Complete Details
Ask Latest Price & Details
Tube Bundle

Tube Bundle
Tube bundle, HBE Tube bundle heat exchangers allow heat exchange performances of up to 1, 000 kW with pressures of up to 35 bar (oil) resp. 10 bar (water). They are economically priced and space-saving.
View Complete Details
Ask Latest Price & Details

Delivery Pumps

Beinlich delivery pumps are nearly wear-free due to the use of high-performance materials like nitrided steel or spheroidal cast iron. Thus, the pumps not only have minimal maintenance requirements, but also a long service life.
View Complete Details
Ask Latest Price & Details

Delivery Pump Units

Beinlich self-priming delivery pump units consist of external gear pumps which are made from standard materials 0.7050 (housing) 1.8550 (shafts and gears) and FKM (static seals).
View Complete Details
Ask Latest Price & Details

High Pressure Pumps

The TR TRG radial piston pump was designed for the high pressure range up to 700 bar and for uncritical, clear media. The pump is available in different versions. Moreover, Beinlich offers the product series TRDTRGD with coated pistons for poorly and non-lubricating media.
View Complete Details
Ask Latest Price & Details

Agitator Drives

Complementing to the range of product offerings including permanent magnetic couplings, canisters, SSIC ceramic plain bearings and the patented BOROHARDCAN, DST also provides agitator drives made from stainless steel 1.4435 1.4404.
View Complete Details
Ask Latest Price & Details

Plain Bearings

Predominantly for use in centrifugal pumps, DST produces complete SSIC Ceramic plain bearings. The bearings are available as axial and radial types and can be combined with the DST standard permanent magnetic couplings.
View Complete Details
Ask Latest Price & Details

High-tech DST Canisters

DST designs and manufactures canisters of highest quality. The large range of products is available in various materials and hereby covers a wide spectrum of applications.
View Complete Details
Ask Latest Price & Details

Steel Oil Tanks

The ready to install HBE steel oil tanks are manufactured from the material S235JR (St37) and are sandblasted and coated both from the inside and outside the tank. That is why the tanks are resistant against hydraulic oil on mineral oil base and low-flammable fluids.
View Complete Details
Ask Latest Price & Details

Aluminium Oil Tanks

The HBE aluminium oil tanks with an all-round fluting are characterised by a good heat dissipation. The stable casted bodies are stackable in all tank sizes, which leads to low freight costs and a space saving storage.
View Complete Details
Ask Latest Price & Details

Aluminium Cleaning Covers

HBE aluminium cleaning covers are available with form gasket as well as with O-ring gasket. Cleaning covers of series RD 250-4 and RD 250235 are especially suitable for steel oil tanks of low size.
View Complete Details
Ask Latest Price & Details

Level Indicators

HBE produces different oil gauges and level switches for level indication. The various products are especially suitable for mineral oils, diesel or benzene and for a minimum temperature range of -15C up to +80C.
View Complete Details
Ask Latest Price & Details

Incorporators

We are well known for supplying of wide variety of Incorporators.
View Complete Details
Ask Latest Price & Details

Tank Heaters

HBE tank heaters are suitable for preheating of hydraulic oil on mineral basis and for quickly achieving the operating temperature at hydraulic units. An optimum viscosity reduces the wear of the hydraulic components.
View Complete Details
Ask Latest Price & Details

Oil Coolers

HBE oil- water coolers are designed as tube bundle cooler or plate heat exchanger. Thus, they allow a high heat dissipation, a large cooling surface and high operating pressure with a compact design.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.