Bcs India Pvt. Ltd.

Machhiwara, Ludhiana, Punjab

With the tremendous success of Three wheel Fodder Harvester and growing demand of farmers for a self propelled luxury model, a new Four wheel Fodder Harvester was born in 2015. This machine was equipped with an efficient hydraulic unit for lifting the cutter bar, Steering with dashboard for ease in accessibility of functions as well as manoeuvring of machine in the field, the raised platform of sulky for comfortable seating posture and clear visibility along with the canopy to provide shade and shelter from sun and weather conditions. The operation of the machine in the field is same because the prime mover and the Fodder Harvester unit is almost similar to the Three wheel machine.

SPECIAL FEATURES : 

• Harvesting and Windrowing of Fodder crops.
• Harvesting of 0.75 Acre of field in 1 Hour, with consumption of 1 Liter Diesel only.
• Mechanical Steering system for easy handling.
• Hydraulic type cutterbar lifting system
• Harvesting and Binding of 0.75 Acre of field in 1 Hour, with consumption of 1 Liter Diesel only.
• Reaper Binder attachment for Harvesting wheat, Paddy and Other grain Crops can also be attached to the same machine.
• Reaper Attachment for suitable cutting of Paddy and other crops having height more than 5 feet can be used with same machine.

Due to very good response of Reaper-Binder, its production has been differentiated with this yet another amazing machine called the Fodder-Harvester .

This machine is highly accepted by the farmer owing to its extremely low Operating as well as Maintenance cost. Fodder Harvester is mainly used for Fodder crops like Barseem, Lucern, Mentha and other Green Fodder.

SPECIAL FEATURES

• Harvesting and Windrowing of Fodder crops.
• Harvesting of 1 Acre of field in 1 Hour, with consumption of 1 Liter Diesel only.
• This machine can be converted into Reaper Binder by simply changing the Cutter Bar attachment.
• A sprayer attachment with capacity of 250 ltr. can be mounted on the same machine.
• Reaper Attachment for suitable cutting of Paddy and other crops having height more than 5 feet can be used with same machine.

Petrol Engine driven welder - Honda GX270 Engine - Permanent magnet alternator - Single-phase generation 3kVA - Max welding current: 200A

The Magic Weld 200 is a compact welding generator, lightweight and professional, with electronic control of the welding current capable of delivering up to 200 A with a duty cycle of 60%.

The weight of the whole machine is only 61 kg. Driven by a Honda petrol engine it uses an innovative permanent magnet to supply a welding current of up to 200 A DC, and it can function simultaneously as a welder and generator.

The presence of an auto idle economizer introduces the concept of "power on demand", allowing both fuel savings and reduced engine wear.

The Magic Weld 200 is able to weld any kind of electrode (rutile, basic, cellulose) up to 4 mm and takes full advantage of the engine's power output thanks to a technology developed by MOSA known as "Power Optimizer".

AC auxiliary power of 2.8 kW/50 Hz 230v or 110v is also available, suitable for powering small tools or lighting. Another professional feature of the Magic Weld 200 is its set-up for connection to a remote control (optional), which allows the operator to control the machine from a distance of up to 20 m.

TECHNICAL FEATURES :

WELDING

• Current range, continuous: 20 ÷ 200A
• Duty cycle: 200 A - 60%
• Open circuit voltage: 70 V
• Arc welding source in D.C. welding
• Welds any type of electrode, including cellulosic
• High frequency control of welding current and voltage
• Single-Phase, 50Hz aux current, inverter generated

GENERAL

• Engine shut down for low oil level (oil alert)
• Auto Idle
• Dry weight: 61 kg
• Dimensions: 630x490x540 mm
• Acoustic power LwA (pressure LpA): 99 dB(A) (74 dB(A) @ 7 m)

VERSIONS ON REQUEST

• Auxiliary output 230V c.a.: 1x230V 16A 2P+T CEE
• Auxiliary output 230V c.a.: 1x230V 16A 2P+T schuko

POWER OPTIMIZER

• Some welding machines incorporate the "Power Optimizer" function , designed and patented by MOSA.
• This is a specific control technique aimed at preventing the engine overload when working near to its power limit.
• With the " Power Optimizer " it is possible to ensure stable and optimal operation in all the welding conditions, exploiting the full power of the engine .