Our Products
Lathe Machines
2 Products availableSaws, Chainsaws & Saw Blades
2 Products availableGrinders, Drills & Power Tools
2 Products availableConstruction Machinery & Equipment
1 Products availableRepair & Maintenance Services
1 Products availableSurface Finishing Machines
1 Products availableGrinding & Milling Tools & Machinery
1 Products availableRoll Forming & Bending Machines
1 Products availableWoodworking Machinery
1 Products availableWe are leaders in the market for providing best range of Concrete Mixure
Technical Specifications
Inches | mm | Inches | mm | Inches | mm | |
---|---|---|---|---|---|---|
Adjustability of Stroke | 18 | 459 | 26 | 663 | 30 | 765 |
Length | 39 | 995 | 52 | 1326 | 55 | 1402 |
Tool Head | 7-1/4 | 184 | 8.1/2 | 210 | 8.1/2 | 217 |
Tool head Feed | 6 | 153 | 7 | 178 | 7 | 178 |
Tools holds in Tool holder | 3/4 | 19 | 7/8*13/4 | 22*43 | 7/8*13/4 | 22*3 |
Nos. of speed | 3 | 3 | 3 | 3 | 3 | 3 |
Types of belts | Vee | Vee | Vee | Vee | Vee | Vee |
Size of table | 11*15*12 | 280*382*306 | 14*20.1/2*14 | 357*52*357 | 15*16*24.1/2 | 388*408*624 |
T-slots | 1/2 | 12 | 5/5 | 32-1/2 | 5/8 | 15 |
Vertical & Horizantal Traverse | 14*18 | 357*452 | 14.1/2*32 | 368*816 | 15*32 | 382*796 |
Overall dimension | 52*42*60 | 1326*1061*1530 | 78*48*55 | 1989*1224*1402 | 86*60*55 | 2193*1530*1402 |
Specification of Vice | 8.1/2*21/4*16.1/2 | 215*58*420 | 9.1/2*2.1/2*22 | 242*64*561 | 9.1/2*2.1/2*22 | 242*64*561 |
Weight approximate | 1010 Kgs. | 1650 Kgs. | 2250 Kgs. | |||
H.P. Requires | 2 HP | 3 HP | 5 HP |
Technical Specification
Length of Bed | 30' | 24' | 20' |
---|---|---|---|
Width of Bed | 44" | 36" | 50" |
Height of Center | 40" | 32" | 46" |
Spindle Hollow | 4-1/8" | 4-1/8" | 4-1/8" |
Total Width of Gap | 24" | 24" | 24" |
Swing in Gap Dia | 100" | 82" | 112" |
Admit Between Center | 186" | 144" | 258" |
Maximum Swing Outer Carriage | 64" | 50" | 76" |
Technical Specifications
Center Height | 250mm | 250mm | 250mm |
---|---|---|---|
Width of Bed | 325mm | 325mm | 325mm |
Admit between Centers | 1000mm | 1500mm | 2000mm |
Spindle Bore | 53mm | 53mm | 53mm |
No. of Spindle Speeds | 8 | 8 | 8 |
Range of Spindle | 45-1000 | 45-1000 | 45-1000 |
Range of Threads | 2-56 TPI 0.5-14 mm 0.125-3.5 Module | 2-56 TPI 0.5-14 mm 0.125-3.5 Module | 2-56 TPI 0.5-14 mm 0.125-3.5 Module |
Main Drive Motor | 3 H.P | 5 H.P | 5 H.P |
Technical Specification
Capacity | ||||||||
---|---|---|---|---|---|---|---|---|
Max. Job Length | Mm | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | 15000 |
Max. Job Width | Mm | 1000-5000 | ||||||
Max. Job Height | Mm | 1000-5000 | ||||||
TABLE | ||||||||
Length | Mm | 3000 | 4000 | 5000 | 6000 | 8000 | 10000 | 15000 |
Width | Mm | 800-3000 | ||||||
Height | Mm | 800-3000 | ||||||
BED LENGTH | Mm | 6000 | 8000 | 10000 | 12000 | 16000 | 20000 | 30000 |
MILLING HEAD | ||||||||
No. of Speeds | 6-12 | |||||||
Range of Speeds | RPM | 50-500 | ||||||
Motor Power | HP | 5-7.5-10-15-20 | ||||||
No. of Cross Feeds | 3-6 | |||||||
Table Feed Motor | 5-50 | |||||||
Cross Slide Lift Motor | HP | 2-7.5 |
<b>MULTIPURPOSE WOOD WORKING MACHINE WITH BANDSAW ATTACHMENT</b>
size | 12" | 18" | 24" |
---|---|---|---|
max. length of jainter planer | 54" | 68" | 73" |
width of table | 12" | 18" | 24" |
over all height floor to thal | 38" | 40" | 40" |
height from floor to table | 34" | 34" | 34" |
cutter block dia | 4" | 4-1/2" | 5" |
cutter block rpm | 4200 | 4200 | 4200 |
circular saw table | 13"*23" | 13"*23" | 16"*27" |
boring capacity | 1/2" | 5/8" | 3/4" |
h. p required | 2 | 3 | 5 |
Wheel | To Cut Max. | Wheel Face | Spokes | Dia of Spoke | RPM | Trolly |
---|---|---|---|---|---|---|
36"(910mm) | 55" | 3"*3/4"(75*20mm) | 14 | 22mm | 625 | 8-1/2'*3-1/2' |
39"(990mm) | 62" | 3"*3/4"(75*20mm) | 16 | 22mm | 600 | 11-1/2'*4' |
42"(1070mm) | 72" | 3"*3/4"(75*20mm) | 16 | 22mm | 575 | 12'*4' |
No. of Vices | Pullies Sizes | Line RTF | H . P | Max. wt | Vertically Pill | Horizontal Frame |
3 | 14"*4" | 50 | 10 | 20.50q | 250*250m | 250*400mm(10"*16") |
3 | 14"*4" | 60 | 15 | 21.50q | 250*250m | 250*400mm(10"*16") |
4 | 14"*4" | 60 | 15 | 22.5q | 250*250m | 250*400mm(10"*16") |
Technical Specifications
Sizes | ft. mm | 8" 2438 | 10" 3048 | 12" 3657 | 14" 4267 | 16"4876 | 18" 5486 | 20" 6096 | 22"6705 | 24"7315 | 26" 7925 | 28" 8535 | 30" 9144 |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Length of Bed V'S | ft. mm | 12" 3657 | 15" 4572 | 18" 5486 | 21" 6400 | 24" 7315 | 27" 8229 | 30" 9144 | 33" 10059 | 36" 10973 | 39" 11887 | 42" 12802 | 45" 13716 |
Length of bed all over | ft. mm | 13" 3962 | 16" 4877 | 19" 5791 | 22" 6705 | 22" 7620 | 28" 8534 | 31" 9449 | 34" 10364 | 37" 110278 | 40" 12192 | 43" 13107 | 46" 14021 |
Stroke of table | ft. mm | 8" 2428 | 10" 3048 | 12" 3657 | 14" 4267 | 16" 4867 | 18" 5486 | 20" 6096 | 22" 6705 | 22" 7315 | 26" 7925 | 28" 8535 | 30" 9122 |
Length of table all over | ft. mm | 9" 4743 | 11" 3553 | 13"3963 | 15" 4572 | 17" 5181 | 18" 5791 | 21" 6401 | 23" 7010 | 25" 7620 | 27" 8230 | 29" 8840 | 31" 9449 |
Thickness of Table | ft. mm | 7-1/2 190 | 7-1/2 190 | 7-1/2 190 | 9 25 | 9 25 | 9 25 | 9 25 | 9 25 | 9 25 | 9 25 | 9 25 | 9 25 |
Planing Width | ft. mm | 4 1219 | 4-1/2 1371 | 4-1/2 1371 | 5-1/2 1676 | 6-1/4 1905 | 6-1/4 1905 | 6-1/2 1981 | 6-1/2 1981 | 6-1/2 1981 | 6-1/2 1981 | 6-1/2 1981 | 6-1/2 1981 |
Height under cross rail | ft. mm | 40 1219 | 4-1/2 1371 | 4-1/2 1371 | 5 1524 | 5 1524 | 5 1524 | 5 1524 | 5 1524 | 5 1524 | 5 1524 | 5 1524 | 5 1524 |
Cutting Speed P.M | ft. mm | 40 12000 | 40 12000 | 40 12000 | 40 120000 | 40 12000 | 30 9000 | 30 9000 | 30 9000 | 30 9000 | 30 9000 | 30 9000 | 30 9000 |
Return Speed P.M | ft. mm | 55 16500 | 55 16500 | 55 16500 | 55 16500 | 55 16500 | 45 13500 | 45 13500 | 45 13500 | 45 13500 | 45 13500 | 45 13500 | 45 13500 |
Method of driving planer | Beltdriven | ||||||||||||
Method of driving table | Rack & Pinion | ||||||||||||
H.P. Reco- | ft. mm | 5 | 7-1/2 | 10 | 10 | 10 | 15 | 15 | 20 | 20 | 25 | 25 | 25 |
Weight in M. Tons (Appox) | ft. mm | 8 | 10 | 11 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 |
Technical Specifications
mm | mm | mm | |
---|---|---|---|
Aloy steel work spindle hardened & Ground-diameter | 100 | 110 | 120 |
Morse Taper Number | 6 | 6 | 6 |
Max. Longitudinal movement of the working Spindle | 550 | 550 | 600 |
No. of spindle speeds | 9 | 9 | 9 |
Range of spindle Speeds | 22 to 240 | 15 to 200 | 12 to 200 |
Longitudinal work spindle feeds nos. | 9 | 9 | 9 |
Max. height of the spindle axis from table surface | 1100 | 1150 | 1200 |
Min. height of the spindle axis from table surface | 30 | 30 | 30 |
Dimensions of Rotary Table | 1125 to 1400 | 1150 to 1400 | 1200 to 1450 |
Longitudinal table traverse | 1650 | 1950 | 2050 |
Long. table traverse feeds (including one Rapid) | 8 | 8 | 8 |
Transversal table travel feeds (including one Rapid) | 8 | 8 | 8 |
Vertical Headstock travel feeds (including one Rapid) | 8 | 8 | 8 |
Rotary table automatic feeds (including one Rapid) | 8 | 8 | 8 |
Max. cross movement of the table | 1200 | 1300 | 1500 |
Max. distance between stay bearing and the facing head | 2650 | 2750 | 2800 |
Facing head diameter | 610 | 610 | 650 |
Weight approximate in kgs. | 11000 | 14500 | 18000 |
Technical Specifications
Drilling Capacity in Mild Steel | 32mm | 40mm | 50mm |
---|---|---|---|
Maximum Drilling Radius | 750mm | 1050mm | 1300mm |
Max. Distance between Spindle and Base | 825mm | 1000mm | 1250mm |
Spindle Travel | 175mm | 180mm | 250mm |
No. of Spindle Speeds | 6 | 6 | 12 |
Range of Spindle Speeds RPM | 90-900 | 90-900 | 45-1000 |
No. of Spindle Feeds | 3 | 3 | 6 |
Range of Spindle Feeds mm/ rev. | 0.1-0.4 | 0.1-0.4 | 0.12-1.25 |
Main Drive Motor | 2 HP | 3 HP | 5 HP |
Elevating Motor | 1 HP | 2 HP | 3 HP |