Testing Equipment in Batala

• MOQ : 1 Piece
• Phase : 220 volts
• Voltage : 220V
• Frequency : 50 Hz
• Power Source : Electric
• Brand Name : SEHMI
• Automation Grade : Automatic

more...

• Frequency : 50 Hz
• Voltage : 220-440V
• Power Source : Electric
• Automation Grade : Automatic
• Brand Name : SEHMI
• Phase : Single Phase

more...

• MOQ : 1 Piece
• Max. Depth of Elevating Screw Below Base(approx.) : 180mm
• Depth of Throat : 200mm
• Max. Test Height : 410mm
• Mains Supply (V/cy/ph) : 415/50/3
• Loads (kgf) : 250 to 3000 in stages of 250
• Net Weight (approx.) : 450 Kgs.
• Machine Height (approx.) : 1127mm
• Drive Motor : 0.33 HP
• Initial Load (kgf) : 250

Machine designed with a hydraulic power pack and control circuit for effortless loading unloading operation. A dial gauge in front measure depth of ball penetration. This facilities production testing within tolerance limits by compression method.   Basic machine design & operation similar to B 3000 more...

• Optical Magnification : 70X
• Maximum Height (mm) : 200
• Test Loads : 5,10,20,30,50 kgf
• Scale least count (mm) : 0.001
• Diagonal measuring range (mm) : 0.05 to 0.4
• Throat Depth (mm) : 135
• Power Supply : 220 VAC, 50 Hz, 1-Phase
• Weight (approx) : 70 kg.
• Machine Dimension (mm) : L585 X W290 X H860
• Optional Test Load : 1 kgf

Wide Testing Range from Soft metal to medium hardness Steel. Motorized loading/unloading. Built in Projection Screen to get accurate Result   Features : Testing range is very wide, from soft metal such as lead, upto the hardest, like hard steel. Same hardness number is obtained on the same specimen, rega more...

• Scale least count (mm) : 0.001
• Maximum Height (mm) : 200
• Optional Test Load : 1 kgf
• Diagonal measuring range (mm) : 0.05 to 0.4
• Power Supply : 220 VAC, 50 Hz, 1-Phase.
• Weight (approx) : 70 kg.
• Test Loads : 5,10,20,30,50 kgf
• Machine Dimension (mm) : L585 X W290 X H860
• Throat Depth (mm) : 135

Wide Testing Range from Soft metal to medium hardness Steel. Motorized loading/unloading. High Accuracy & Repeatability of measurement at all loads.   Features : Computerized (PC based) Vickers Hardness Machine. Direct & accurate measurement of Vickers hardness number using "State of the art" ima more...

• MOQ : 1 PIECES
• Supply Type : Manufacturer
• Make : Prolab India
• Resolution : 1 RPM
• Accuracy : + 1 RPM
• Speed : 25 – 200 RPM, + 1 RPM
• Temp. Control : Microprocessor Based using PT100/Semiconductor Sensor
• Power : 230 V ± 10%, 50 Hz. AC
• Heater : 1700 W
• Temperature Range : 30 – 50 °C

Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredient in any pharmaceutical formulation, tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formula more...

• Power Supply :  230 V ± 10%, 50 Hz. AC
• Accuracy : ± 0.2o C
• Supply Type : Manufacturer
• Keyboard : 19 soft touch membrane type keys
• Reaction Vessel : 1000 ml jar with stirrer pedal and basket
• Make : Prolab India
• Temperature Range : 30 to 50o C
• Speed : 25 to 200 RPM ±1 RPM
• Printer Attachment : Provision for the Attachment of Dot-matrix Printer with Centronics Parallel Port Interface Available
• Temp. Control : Microprocessor based using PT100/ Semiconductor sensor as per IP/USP

Microprocessor Dissolution Test Apparatus is a solid state instrument designed for the determination of active drug ingredient in any pharmaceutical formulation, tablet or capsule as per IP and USP specifications. This apparatus evaluates adequate bio-availability and provides necessary information to formula more...

• Electric Motor : Low RPM A.C. Motor
• Model : PFT 70 - Double Drum / PFT 71 – Single Drum
• Auto Alarm At Completion : Yes
• Test Time Programmable : Programmable
• Supply Type : Manufacturer
• Auto Removal of Sample : Yes
• Rotation Speed : 25±1
• No of Wheels : Two (One in Model P71)

FEATURES:  Programmable Time with Digital Display Auto Stop after completion of Set Time with Alarm Auto removal of sample without opening the drum Precise control of RPM 25±1 more...

• Certification : CE Certified
• Warranty : 1 Year
• Power Source : Electric
• Type : Automatic
• Frequency : 66Hz
• Condition : New
• Application : Liquid Testing

Canadian Freeness Tester provided by us is used for determination of freeness of wood fiber ground wood and mechanical pulp. It measures the Canadian Freeness number which is a measurement of the drainage capacity of different pulp types. It is a useful index of the amount of mechanical treatment given to the more...

• Power Source : Electric
• Condition : New
• Feature : Easy To Use, Proper Working
• Warranty : 1 Year
• Type : Automatic
• Frequency : 45Hz
• Certification : ISI Certified

The Curl Tester of our company is used to measure the Degree of curl when the paper sample exposed to water. Our product runs on the principle of wetting one side of the paper and determining the maximum curvature developed or the time required to reach maximum curvature .The maximum curvature is an indicatio more...

• Warranty : 1 Year
• Power : 1-5 Kw
• Voltage : 220 V
• Certification : CE Certified
• Type : Automatic
• Feature : Easy to Use

We manufacture and supply highly efficient Cobb Sizing Tester . Our product is suitable for determining the water absorbency of paper, paperboard and corrugated fiberboard. Our Cobb Sizing Tester conveniently measures the weight increase of a sample, exposed to water for a given time. Specifications Test area more...

• MOQ : 50 Piece
• Certification : CE Certified
• Power Source : Electric
• Body Material : Aluminum, Plastic
• Frequency : 50Hz-65Hz
• Application : Energy Monitoring
• Voltage : 220 V
• Country of Origin : India

more...

• Frequency : 50Hz-65Hz
• Voltage : 240
• Country of Origin : India
• Certification : CE Certified
• Application : Energy Monitoring
• Brand Name : L&T
• Body Material : Aluminum, Plastic
• Power Source : Electric

more...

• Certification : CE Certified
• Warranty : 1 Year
• Power Source : Solar
• Phase : 1 Phase
• Application : Domestic
• Country of Origin : India
• Automatic Grade : Automatic
• Type : Automatic
• Material : Metal, PVC

more...

• MOQ : 1 piece
• Brand Name : Advancetech

Abrading instrument, consisting of a horizontal turntable with a center clamp, which revolves at 70 to 75 rpm, upon which the specimen is attached, and two weighte parallel arms, each carrying a special abrasive embedded rubber whell, freely rotating on a ball-bearing horizontal spindle, and each resting on t more...

• Bending Angle : Adjustable 5 to 30 Degrees Six Fixed Position 7,5 15 20 25 and 30 Degrees
• Clamp Pressure : 3.0 Kg.
• Mains Supply : 220 Volts ±10%, 50 Cycles (if Not Otherwise Specified in Your Order and Acknowledge By Us)
• Bending Length  : Seven Fixed Bending Lengths 5 10,15,20,25 & 50 Mm
• Display : Led Display
• Measuring Range : up to 5000 mN
• Brand Name : Advancetech
• Load Sensor  : 300.0 Gm
• Power Requirement : Capacity 500 Watt

Digital Stiffness Tester Are manufactured With High-quality Material. The tester are equipped with for results reading according to TAPPI T 556 and SCAN-P 29 in mN to mNm/ The calculation of this specific bending stiffness and its calibration by using the stiffness tester is based on the standard DIN 53 121 & more...

• Brand Name : Advancetech

We Supply Taber Stiffness Tester All Across india. These Machines Are manufactured With High-quality Material. Advancetech Stiffness tester (taber type) is used to evaluate stiffness and resiliency properties of materials up to 10, 000 Taber Stiffness Units. This precision instrument provides accurate test me more...

• Dimension : 230mmx180mmx110mm
• Display : 3½ Digital LED
• Resolution : 1 NTU
• Model No : SI-221
• Range : 0 to 1000 NTU
• Detector : Photocell / Photodiode
• Light Source : 6V Tungsten Lamp Or Bright Blue LED
• Sample System : 30 mm Clear Glass Test
• Power : 220V±10%, 50Hz AC
• Supply Type : Manufacturer

We are offering our superior range of turbidity meter for our clients based globally. These are manufactured with the help of our designers and engineers using high technology and state-of-the-art facilities. Also, we are able to custom design the range in accordance with the specifications of the clients. &n more...

• Performance : Optimum
• Condition : New
• Supply Type : Manufacturer
• Features : Long functional life
• Efficiency : Consistent

Since, we have collaborated with numerous distributors; we can cater to buyers all over PANCHKULA(India) and other markets. Since, we have stringent quality control policies, our entire range of products are trusted throughout the industry. more...

• Accessories : Conductivity Cell, Operation Manual.
• Accuracy : ±1% FS  ±1 Digit
• Range : 0-1999µS 0-19.99 mS
• Conductivity Cell : Platinum DIP Type
• CellConstant Adjustment : Pre Adjustable
• Weight : 0.8 Kg. (Approx.)
• Resolution : 0.1µS
• Power : 1 x 9V Battery
• Display : 3½ Digit LCD
• Supply Type : Manufacturer

We offer a wide range of Portable Conductivity Meter that is fabricated using quality raw material and is available at optimum prices. With the assistance of our engineers and designers we are able to carve a niche for ourselves in catering conductivity meter. Salient Features Reliable and easy to operate 3 & more...

• MOQ : 1 Piece
• Country of Origin : Made in India
• Brand Name : Global Engineering Corporation
• Type : Electronic
• Thickness : 0.004
• Voltage : 220 V
• Frequency : 50 Hz
• Power Source : 220V AC

more...

• Voltage : 200- 220 V
• Finishing : Coated
• Brand Name : Global Engineering Corporation
• Country of Origin : India
• Power Source : Electrical
• Type : Folding Endurance Tester
• Material : Mild Steel

more...

• Brand Name : Global Engineering Corporation
• Type : Analog
• Features : Easy to Operate and Has High Accuracy Level ± 1% of Readout Value and Reliability
• Length : 50 + 2.0mm
• Height : 62mm+ 0.2mm
• Country of Origin : Made in India

more...

• Material : Ss Body with Digital Timer, Busier, Burner and Brushing Device
• Distance of Lower Marker Wire from the Auxiliary Clip : 10 cm
• Distance of Upper Marker Wire from the Main Clip : 28 cm
• Distance of Lower Marker Wire from the Main Clip : 155 cm
• Application : Used for Flammability Test of Garment/Fabric
• Size of Test Specimen : 183 cm x 4 cm
• Standard : ASTM D1230, CFR – 16 – 1610
• Diameter of Burner Opening : 9.5 mm
• Size of Modified Test Specimen : 40 cm x 4 cm

more...

• Feature : Easy To Use, Electrical Porcelain, Four Times Stronger
• Temperature Capacity : High Temperature, Low Temperature, Medium Temperature
• Power Source : Electric
• Frequency : 45Hz, 66Hz
• Automatic Grade : Fully Automatic
• Application : Industrial Use

We are a leading Manufacturer, Exporter & Supplier of Pilling Tester . It is manufactured making use of supreme quality of raw materials. We make it available in different specifications at request of customers. The dimensional accuracy, precise design and easy operability of Pilling Tester make it suitab more...

• Test fluid : Glycerin
• Rate of fluid displacement : 95 cc/ minute
• Opening in upper clamp : 30.5 mm diameter
• Capacity : 35 kg/cm².
• Gear Box : Worm reduction type
• Opening in lower clamp : 38.1 mm diameter

Being a prominent Manufacturer, Exporter & Supplier in the industry, we present a wide range of Digital Bursting Strength Tester to our customers. The quality we offer is unmatched. We take special care of quality by testing it against the highest parameters of quality set by the industry. We provide Digi more...