Srinidhi Engineers is here with a wide range of products for the customers including propeller test rigs. We are the best propeller test rig manufacturer in India. An extraordinarily built electric propeller test rig has been arranged and attempted to control most of our new propmore...
The speed can be connected to any load process. When pumping losses are relatively low, extra power can be generated and temporarily stored in the accumulator. However, when the losses are high, the load process can be supplied from the accumulator unit. Hydraulic Test Rigs are cmore...
Our designed test rigs include integral fluid reservoir, back up accumulators, all necessary panel mounted, pressureflow controls, pressure gauges, flow meters, quick release couplings with complete electrical controls and instrumentation as required by the system. We manufacturemore...
This test rig facilitates web and vehicle sensing lock test on 100% check basis in the production line for partial fulfillment of ECE/JSS etc. Specifications. Features include- up to 3G capability, less than 45 seconds cycle time, and easy front loading scheme, Accurate control omore...
This is a Universal Test Rig for conducting Performance Acceptance Tests (PAT) for all 5 actuators of a passenger aircraft landing gear. Designed and built by our in-house R&D team, the tests include Proof pressure and Static Test, Static load compression test, Static load tensilmore...
Automatic selection of the flow, pressure and speed on selection of the model Security (multiple level) to allow access, based on user levels Configuration of sensors and online calibration of sensors Drive Motor Max Speed: 500-800 RPM Pump Supply Max Pressure: Max 200 Bar Pump Smore...
Lower specimen : 10 mm (diameter) X 3 mm (thick) - disc
Stroke : 1 mm (fixed)
Upper specimen : 6 mm (dia) - ball
Temperature : Ambient to 150 Deg C. Optional "High Temperature Module" for ambient to 400 Deg C
Frequency : 1 to 50 Hz
Load : up to 1.0 kg
The purpose of this tester is to characterize friction under lubricated condition using a ball on disc configuration. This tester is particularly suited for evaluating low lubricity fluids like diesel and gasoline. The system consists of a temperature controlled stage that housesmore...
Jet On Vanes Francis Turbine Test Rig (5HP output 15HP supply pump) a) Test rig consists of a Francis water turbine designed for laboratory experimental purpose and to conduct test in metric units. The specifications of the turbine are as follows: - Design Speed - 1500 RPM. Capacmore...
Kaplan Turbine Test Rig (1 KW capacity 5HP Supply Pump) a) Test rig consists of a Kaplan turbine designed for laboratory experimental purposes and to conduct test in metric units. The specifications of the turbine are as follows: Normal Speed - 2200 RPM. Capacity-1.0 KW. The unitmore...
Francis Turbine Test Rig (5HP output 15HP supply pump) a) Test rig consists of a Francis water turbine designed for laboratory experimental purpose and to conduct test in metric units. The specifications of the turbine are as follows: - Design Speed - 1500 RPM. Capacity - 3.7 KW.more...
We manufacture custom built automated hydraulic test rig for testing hydraulic components like cylinders, pumps, valve etc., with plcscada systems. more...
Loading Arrangement: Eddy Current Dynamometer of suitable size as per engine power rating provided with eddy current controller with digital displays for excitation voltage and current.Air Flow Measurement: Powder Coated box with orifice type flow meter with Digital manometer Ranmore...
IEICOS Engine Test Rigs are specially designed for use in engineering and technical educational institutions for evaluation and performance studies of petrol and diesel engines. IEICOS IC Engine Test Rig is a complete setup for evaluating diesel engine performance by means of loamore...
Assembled gear boxes for heavy duty vehicles like bus, trucks need to be tested for their performances. This calls for a very high end system design and system integration. OMTT has successfully designed, developed gear box test rigs for one Sweden commercial vehicles manufacmore...
Upto 3 G capability Less than 45 secs cycle time and easy front loading scheme Accurate control of G-level with plots, reports etc User friendly tester with indigenous design and components Specifications  Max Cycle Time: 45 Secs. Max Servo Motor RPM: 3000 Servo Motor Power: 75more...
Automatic selection of the flow, pressure and speed on selection of the model Security (multiple level) to allow access, based on user levels Configuration of sensors and online calibration of sensors Specifications  Drive Motor Max Speed: 500-800 RPM Pump Supply Max Pressure: more...
We have manufactured and installed Booster Rocket Engine Test Rigs having rocket motor diameter of up to 2 meters and thrust range of up to 25 tonnes. These can be manufactured and installed for Axial thrust measurement Six component thrust measurement. more...
The journal bearing test rig for investigating the distribution of pressure in slide bearings the principal of hydrodynamic lubrication. The distribution of pressure & the carrying capacity can be determined on a sliding bearing model at different bearing loads & speeds. Learningmore...
Modern manufacturing facility designed for the filtration products which includes Media cutting and slitting machines, media Pleating Machines, Thermal Welding machines, High speed Imported sewing machines, HEPA paper pleating and Aluminium foil Corrugation Machines etc. In-housemore...
Modern manufacturing facility designed for the filtration products which includes Media cutting and slitting machines, media Pleating Machines, Thermal Welding machines, High speed Imported sewing machines, HEPA paper pleating and Aluminium foil Corrugation Machines etc. In-housemore...
Spindles are tested as per DIN 8637 Standards for Temperature, Vibration at maximum speed. Condition monitoring will be undertaken on specific request. more...
This test rig is used to find the performance and combustion parameters of Single Cylinder Two Stroke Petrol Engine. Wide range of combustion studies can be conducted with the help of this setup. Engine Combustion and performance parameters like Actual volume of Air, Volumetricmore...
This test rig is used to find the performance and combustion parameters of Variable Compression Ratio Petrol Engine. The compression ratio of the engine is variable from 2.5:1 to 10:1.A unique provision is been made to vary the spark timing of the engine. Â Wide range of combustimore...
This test rig is used to find the performance and combustion parameters of Variable Compression Ratio Multi-Fuel Engine. The compression ratio of the engine is variable from 5:1 to 20:1. A unique provision is been made to vary the spark timing of the engine. Wide range of combustmore...
We are manufacturer, supplier of Endurance Test Rig which are high on demand in the market for use in automobile industries and they are mounted in the vehicles and they have been designed in an efficient manner using the best technology. These products have been priced at very rmore...
Eloquent Spiral Test Rig The spiral Test Rig is Designed for small batch feasibility test either closed or open circuit ) on site or in on site or in a Laboratory environment. The unit is supplied complete with a 375 liter sump, steel framework, motor, motor starter, 1" x 1.5" cemore...
THIS TEST BENCH IS DESIGNED AND DEVELOPED ACCORDING TO IEC-60947-1 FOR ENDURANCE OF THE MCCB, MCB SWITCH GEARS PRODUCTS.WE HAVE USED PNEUMATICS AND ELECTRONIC COMPONENTS IN CAPTURING THE DESIRED PARAMETERS.THIS TEST BENCH CONSITS OF THREE STATIONS AND CAPABLE OF MEASURING THE THRmore...
Our Hydraulic Test Rigs are fabricated using quality raw material. These testing rigs determine the exact flow rate, pressure drop, and filtering efficiency. Owing to its standard quality, filter testing test rig is applicable in various industries which comprise petroleum, chemimore...