KOS Series of pumps are designed for underwater applications and hence no need of priming and foot valve. Pumps are easy to install and can withstand voltage variation from 350-440 volts. Years of experience, superior design and better manufacturing techniques have resulted in thmore...
Champion series Borewell Submersible Pump are designed for use in bore wells. Pumps are of centrifugal, multistage, high-speed design and hence are light-weight and compact. It has a Radial flow/Mixed flow impeller design and has low power consumption per stage. Pumps are widely more...
NS Series pumps are single stage, single suction pumps with overhung non-clogging impeller. Pumps are fully submersible and therefore do not require any priming. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with more...
Features : Motors are designed using enamelled copper wire instead of PVC insulated copper wire. Due to this the design is highly efficient reducing power consumption & thereby reducing cost of operation.The motors are filled with special food non-toxic dielectric o
Voltage: : 415+6%, -15% in 3Ph, 230v + 10%, -20% in 1hPh
Easy to install: Pumpset ress at the bottom of open well and installation does not require foundation. No suction problem: Pumpset works under water and hence suction problems do not arise. No water level guard required: Due to horizontal construction, the pumpset will always remmore...
For centuries 80 mm bore wells are being operated by hand pumps. Single phase electric supply has reached almost all places, there was need to have submersible pump to pump out water from 80 mm bore wells. BATLIBOI introduces V-3 submersible pump suitable for 80 mm bore. This is more...
80100 mm (3"4") V-6 V-8 V-10 submersible pumpsets are manufactured as per latest technology and most modern design. Rewindable, water cooled, water lubricated motors using winding wires of international quality. Total dependable bearing of international quality. Motors suitable fmore...
KOS Series of pumps are designed for underwater applications and hence no need of priming and foot valve. Pumps are easy to install and can withstand voltage variation from 350-440 volts. Years of experience, superior design and better manufacturing techniques have resulted in thmore...
champion series borewell submersible pump are designed for use in bore wells. Pumps are of centrifugal, multistage, high-speed design and hence are light-weight and compact. It has a radial flow/mixed flow impeller design and has low power consumption per stage. Pumps are widely more...
NS Series pumps are single stage, single suction pumps with overhung non-clogging impeller. Pumps are fully submersible and therefore do not require any priming. Pumps can be offered in stationary as well as transportable arrangements. The stationary arrangement is supplied with more...
Dimensions of DLX enclosure ( 2 to 3 HP) : 335mm(H) X 275mm(W) X 125mm(D)
Dimensions of ECO enclosure ( upto 1.5hp) : 260mm (H) X 210mm(W) X 120mm (D)
Contactor Type: : LK1 16A / HK-0 16A upto 2 HP & Type LK1 25A / Hk-) 25A for 3 HP
Himlite XL Panels are reliable, robust, compact in size, elegant in looks, easy to use and maintain; They are able to withstand toughest Indian conditions of dusty, humid & corrosive atmosphere & wide fluctuating voltage, ensuring long & dependable service. They have been scientimore...
Short Circuit Protections: : 32A Rewireable Porcelin fuse or MCB of suitable rating
Motor Rating : 2 HP- 7.5 HP
Voltmeter Rating: : 0-500V
Contactor Type : LK1 / HK-0 16A / 25A
Himlite XL DOL 3 Phase Motor Control Panels offer protection features that are essential for the safe running of your pump. Safety features like accurate overload protection, protection from phase failure (single phasing), protection from short circuit conditions, and no-volt promore...
Briiller Engineering is in to manufacturing of electrically driven light weight submersible dewatering pumps for industrial use. The pump is designed in such a way that it can be lifted very easily with a help of two manpower in any industrial site without spending much time for more...
As per IS: 1448& ASTM D-93 To determine the closed cup flash point of petroleum products having flash point above 49c upto 400c with auto flash point detection, pressure correction and serial port for printer interface OPTIONALS SERIAL PRINTER ELECTRIC IGNITION INSTEAD OF FLAMmore...
Creative vertical pumps are widely used in spillage applications in beneficiation plants. These pumps have no gland box, submerged shaft seals or bearing. This eliminates requirement of sealing water, guarantees minimum maintenance. The bearings are fitted above the sump level wimore...
A submersible pump is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped.The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation dmore...
A submersible pump is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped.The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation dmore...
REGULAR POWER HP : 3 - 40 HP STAGE : 2-30 DISCHARGE RANGE (LPM) : 32 - 1800 HEAD RANGE (MTRS) : 5 - 390 50 Feet (CI & SS) Radial Flow POWER HP : 3 - 30 HP STAGE : 3-30 DISCHARGE RANGE (LPM) : 50 - 1000 HEAD RANGE (MTRS) :more...
A submersible pump is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the fluid to be pumped.The main advantage of this type of pump is that it prevents pump cavitation, a problem associated with a high elevation dmore...