Our Products
Flush Doors
1 Products availableDoor, Window Frames
1 Products availableElectric Control Panels
1 Products availableTimber
1 Products availableWood And Lumber
1 Products availableOur Complete range of products are beechwood, Sycamore Maple, Wenge door, Primer Paneled Doors and Laser Cut Panels.
The word teak comes from the Malayalam word thekku. In Bengali it is called 'Segun' () or more commonly as Sagwan in various Indian languages. But it is naturalized and cultivated in many countries, including those in Africa and the Caribbean. Burma accounts for nearly one third of the world's total teak production. Teak is a yellowish brown timber with good grains and texture. It is used in the manufacture of door / window frames, room ventilator frame, outdoor furniture, boat decks, and other articles where weather resistance is desired. It is also used for cutting boards, indoor flooring, counterto ps and as a veneer forindoor furnishings.
Teak, though easily worked, can cause severe blunting on edged tools because of the presence of silica in the wood. Teak's natural oils make it useful in exposed locations, and make the timber termite and pest resistant. Teak is durable even when not treated with oil or varnish. Timber cut from old teak trees was once believed to be more durable and harder than plantation grown teak. Studies have shown[10] Plantation teak performs on par with old-growth teak in erosion rate, dimensional stability, warping, and surface checking, but is more susceptible to color change from UV exposure.
Padauk wood is obtained from several species of Pterocarpus. All padauks are of African or Asian origin. Padauks are valued for their toughness, stability in use, and decorativeness, most having a reddish wood. Most Pterocarpus woods contain either water- or alcohol-soluble substances and can be used as dyes.
The padauk found most often is African Padauk from Pterocarpus soyauxii which, when freshly cut, is a very bright red but when exposed to sunlight fades over time to a warm brown. Its colour makes it a favourite among woodworkers. Burmese Padauk is Pterocarpus macrocarpus while Andaman Padauk is Pterocarpus dalbergioides. Padauks can be confused with rosewoods to which they are somewhat related, but as a general rule padauks are coarser and less decorative in figure.
The European species Fagus sylvatica yields a utility timber that is tough but dimensionally unstable. It weighs about 720 kg per cubic metre and is widely used for furniture framing and carcass construction, flooring and engineering purposes, in plywood and in household items like plates, but at times it is used as a decorative wood at little humid climtes as well. The timber can be used to build chalets, houses and log cabins. Beech wood is used for the stocks of military rifles when traditionally preferred woods such as walnut are scarce or unavailable or as a lower-cost alternative.[9] We undertake orders for all the above species for making door frames as per customer specifications.
Ithas been introduced to subtropical regions around the world commencing in the mid to late 19th century and is widely planted in India, Sri Lanka, Central & South America and Africa.
Dubbed the most workable wood in the World in the 1800s, Silver Oak was originally from Australia. Now it grows in various other regions of the tropics to as far north as L.A. The dust from this wood is an irritant in 20% of the population. Beautiful pinks, reds, and golden tones combine with exceptional iridescent qualities to make this an excellent choice for instruments. Unique grain patterns with beautiful rays set this exotic hardwood apart from other woods. It is a relatively inexpensive choice, but is viewed by some Luthiers as preferable due to its great acoustical properties. Out of India, it is used for making guitars also. However, Silver Oak in India is more preferable for scaffolding purpose as it has more water holding capacity and good nail holding grip even at minute distance of nailing points.
It is planted for timber production; the wood is white with a silky lustre, and hard-wearing, used for musical instrument making, furniture, wood flooring and parquetry. Occasional trees produce wood with a wavy grain, greatly increasing the value for decorative veneers. The wood is a medium weight for a hardwood. It is a traditional wood for use in making the backs, necks and scrolls of violins.
The wood is often marketed as rippled sycamore. Its uses are mainly indoor due to its perishability when in contact with soil.
In other words French, English, Italian and even Persian Walnut are all essentially the same botanical species. Differences in appearance are climatic and topographical, not political. European Walnut is reputed to work well with hand and machine tools, possesses medium bending strength and a very good steam bending classification. There is medium movement in service and the timber is used for high class furniture and cabinet making, turning and carvery. Historically much of the Queen Anne period furniture was crafted from Walnut.
The northern red oak is one of the most important oaks for timber production in North America. Quality red oak is of high value as lumber and veneer, defective logs are used as firewood. Other related oaks are also cut and marketed as red oak, although their wood is not always of as high a quality. These include eastern black oak, scarlet oak, pin oak, Shumard oak, southern red oak and other species in the red oak group.
Construction uses include flooring, veneer, interior trim, and furniture. It is also used for lumber, railroad ties, and fence posts.
Red oak wood grain is so open that smoke can be blown through it from end-grain to end-grain on a flat-sawn board.For this reason, it is subject to moisture infiltration and is unsuitable for outdoor uses such as boatbuilding or exterior trim.
The wood is popular in segmented woodturning because of its dimensional stability and color contrast when mixed with lighter woods such as maple. This makes it especially sought after in the manufacture of high-end wood canes.
The wood is sometimes used in the making of archery bows, particularly as a laminate in the production of flatbows. It can also be used in the making of rails or pin blocks on hammered dulcimers. The wood is heavy and hard, suitable for flooring and staircases.
We undertake orders for making door frames for all major hardwood species and deliver sizes for all wood species as per customer specifications.
"MR" is the acronym of "Moisture Resistant" . MR glue means the glue is resistant to moisture . Plywood with MR glue is resistant to moisture . MR plywood are usually used for home interior application, such as furniture grade plywood / blockboard and so on. Plywood is pressed under high temperature and pressure and is bonded with superior grade resin (conforming to IS 848:1974) resulting in a product which is dimensionally stable, structurally strong, exceptionally durable and has superior nail holding capacity.
The quality of timber used for the manufacture of our plywoods makes them resistant to fungus, rot and other destructive micro-organisms on its own. Our Ply goes through a special treatment using high quality preservatives. The use of these preservatives on our plywoods during hot pressing makes them free from termites and borers. This international antiborer technology has proven to be highly effective and is popular worldwide.
Applications :
plywood is widely used for the woodworking, furniture making, homes, offices, business centers, hotels etc.
Size (In feet) : 6x3, 6x4, 7x3, 7x4, 8x3, 8x4
Thickness : 4, 6, 8, 12, 18 mm
Our Waterproof Plywoods also known as Marine Grade, with better multi-tasking abilities than an ordinary ply to suit different climatic conditions. Bonded with undiluted PF (Phenol Formaldehyde) resins, it can withstand alternate drying and wetting and other temperature variations. Every ply is made from imported Dipterocarpus STT timber, which is equally effective in keeping fishing boats safe from insects and deadly aquatic organisms. The strength is comparatively higher as the face is more thicker than the ordinary plywood.
An ideal choice of furniture & fixture, kitchen, bathroom, cupboard, doors, plywood, bus & truck bodies railway coaches etc. This superior quality plywood is unaffected from boiling water after hour of contact its anti-warp, properties makes it literally invincible. Moreover the ply is insulated through special chemical treatment to save it from termites & insects & enhance the life-span of your furniture. the finished plywood is subjected to proper chemical treatment with water-soluble fixed type preservatives under vacuum pressure to ensure protection against wood destroying organism
Applications :
Extensively used in making of furniture, partitions, racks/shelves, shutters, under layer for decorative laminates etc.
Size (In feet) : 6x3, 6x4, 7x3, 7x4, 8x3, 8x4
Thickness : 4, 6, 8, 12, 18 mm
film faced shuttering plywood is manufactured with high density timber in ultra modern hot presses. Since it is manufactured with CPGL technology, thus it has extra strength than ordinary film face ply. For structurally strong and better bonding it is treated differently while manufacturing.
Margo film face shuttering ply is widely known for the maximum repetitions it gives. Users find it a very useful & economical product worth their investment.
Special features of Margo film faced shuttering plywood are:
Margo film faced shuttering plywood is most effective in RCC constructions.
It has a smooth mirror like superior finishing on both surfaces.
It saves up to 45% of cost compared to other similar products due to more repetition during shuttering work.
Flush door are assembled with hard wood which is known for its load bearing capacity. Full size frames are used for better strength. Both side lock rails are provided for sufficient strength to the handles and knobs.
All core, battens and frames are treated with special chemical, which makes the door stable in case of borer and termite attack. BWP grade PF resin is used during manufacturing which provide long life to doors in any climate.
Grades : Plastic Coated, One Side Decorative, Both Side Decorative, Non Decorative (Paint Grade).
Standard Size (In Mtrs.)
2105 x 900, 2105 x 800, 2105 x 700
2005 x 900, 2005 x 800, 2005 x 700
1905 x 900, 1905 x 800, 1905 x 700
It is transformed into a beautiful and functional door by laminating two pieces of moulded door skins over it. Honeycombs as wel as solid timber strips infill are then used to fill up the hollow core between the door skins for strength and stability.
The door skins are made of high quality HDF, which ensured minimal moisture retention and bloating, as compared to MDF door skins. Compared to other types of doors, skin doors have near to zero defects and do not expand or contract as much, even in extreme climate conditions. Even if they experience severe expansion and contraction, skin doors will still retain their shape.
Decorative Melamine Faced Chipboard (MFC) is designed with RICHWUD Plain Board laminated on impregnated melamine paper. The board is widely used for interior decoration applications for the home, kitchen as well as office furnitures. The standard panel size comes in 1220mm x 2440mm (4' x 8') with standard thickness of 9mm, 12mm, 15mm, 16mm, 18mm, 25mm and 30mm.
RICHWUD Pre-Laminated Particle Boards are is being widely used in the furniture making industry, especially in manufacturing office furniture, kitchen set, home furniture such as home entertainment set, TV rack, and in making color boxes.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : depending upon qtty
Medium Density Fibreboard (MDF) is an engineered wood panel product. It is specially manufactured for furniture and joinery industries. The homogenous nature of Richwud fibreboard has consistency from surface to core. And its versatility allows intricate and precise machining and finishing techniques when producing high quality furniture, cabinetry components, craft work and flooring.
The overall strength and smooth surface of Richwud fibreboard make it suitable for painting to achieve high quality finishing and provide a uniform substrate for overlaying. Furthermore, it can be worked easily with all conventional woodworking and hand tools.
We also manufacture low emission product. Its formaldehyde content of standard grade MDF can vary according to the nature of the urea formaldehyde or other resin used as a binding agent. Low formaldehyde MDF, is recommended for all applications where the ventilation is likely to be restricted, where damp conditions or high ambient temperatures prevail or where the occupants of a building have special needs, in sheltered accommodation, schools and hospitals, for instance.
The binder or resin used for these types of product are developed to ensure they meet specific formaldehyde emission requirements but at the same time maintain the overall strength and the smoothness of the surface. decorative melamine laminated MDF designed for a wide range interior furnishing and joinery applications. Richwud hard wearing melamine surface makes it particularly suitable for all types of commercial and domestic furniture, kitchen and bathroom cabinets and shop fitting projects.
By blending the style of an international range of decorative solid colours and woodgrain decors, with the durability of a hard wearing melamine surface, and the versatility and workability of MDF, Richwud creates a winning combination for all designers, furniture manufacturers and joiners.
Richwud is a versatile panel product bringing comfort, convenience and contemporary style to open plan living the environments of today.
The finger joint (also known as a comb joint) board is a woodworking joint made by cutting a set of complementary rectangular cuts in two pieces of wood, which are then glued. To visualize a finger joint simply interlock the fingers of your hands at a ninety degree angle; hence the name "finger joint." It is stronger than a butt or lap joint, and often forms part of the overall look of the piece. It can be used to make joinery material, beams, table tops, parquet flooring, Cabinet shutters, Wardrobe panels, Stave panels and Staircase panels. It is also used for high traffic areas such as gymnasiums, racquetball clubs and dance floors, as well as the hardwood floors found in homes. In general, finger joints add strength as it has less warpage due to usage of shorter pieces of lumber. They offer a way to upgrade smaller pieces of rubber wood into usable products.
Postforming provides an ideal solution wherever furniture has to be protected from mechanical, thermal or chemical loads. The outstanding benefit: the surface and edge of the panel are protected by a continuous laminate. Traditionally postform countertops were manufactured with a solvent-based contact cement (a highly flammable, volatile organic compound - VOC). However, in today's marketplace PVA adhesives have taken over for reasons of environmental responsibility (no VOC's), safety (non-combustible), economy, and strength of the glue line.
Membrane pressed kitchen shutters are very popular. They are manufactured by using MDF and PVC film suitable for membrane pressing. This is a special film which is printed with the wood grain or any other design which can be elongated without any deformation and this is soft and flexible before it is heated and applied. Once this film is heated and pressed, it becomes very hard and rigid, giving very high scratch resistance and durability. For this process, heat activated polyurethane glue is used.
Green Panelmax Plain MDF is a high-strength panel made from wood or lignocellulosic material which is refined into fibres and then reconstituted with a resin binder at elevated temperatures to form panels which can be used for construction of interiors and furniture, among various other applications. Being manufactured from 100% agro-forestry timber, it is also eco-friendly and an ideal substitute for solid timber and other non eco-friendly panels.
Green Panelmax Plain MDF is available in :
Grades:
Grade I (Exterior grade) boards are made with special melamine formaldehyde formulated resins which make them ideal for use in water and moisture prone areas.
Grade II (Interior grade) boards can be used in the construction of all types of interiors and furniture.
Thicknesses: 2.3mm, 2.5mm, 3mm, 4mm, 5.5mm, 8mm, 11mm, 12mm, 15mm, 17mm, 18mm, 25mm, 30mm and 35mm.
Sizes: 8X6; 8X4; 7X6; 7X4 6X 4 and 6X 3.
We also concentrate on all types of turnkey projects (material supply and fabrication) for commercial and re sidential and can supply the material on knock down mode with post forming / PVC Foil membrane shuttering as per customer specification.
Additional Information:
Payment Terms :