Tesa Fibre Boards are being manufactured with Hard Wood so density of our product becomes better than other products available in market. Our Boards are have best routing characteristics due to uniform density gradient & compact core, achieved by using special German Technology for MAT formation & 8 cylinders, 18 day light press (1st in India). Action Tesa has state of the art Glue Kitchen capable

HDHMR - HIGH DENSITY HIGH MOISTURE RESISTANCE:

Hard Wood used for higher density of productSpecial Glue being used to make it Water Resistant Product as per Indian climateWater Resistance Characteristics as per ISI StandardIdeal Routable Substrate with Sharp Cut & Routed EdgeReady & Smooth Surface which absorbs less paint in painting process thus saves paint cost alsoEasy WorkibilityCost Effective Paneling Solution

THE KEY APPLICATION AREAS OF HDHMR:

Kitchen ShuttersFurniture where risk of moisture existDoor ShuttersPacking IndustryShoe HeelPartitionsOutdoor Fixtures like election cutouts or similar applications.
Types of surface finish- Suede & Matt.

HIGH DENSITY HIGH MOISTURE RESISTANCE(HDHMR) EG

Product Specification:

• Water Resistance
• Termite Resistant
• Environment Friendly
• Cost Effective
• Higher Density
• Higher Strength
• Ready & Smooth Surface

A HDF based wall, ceiling & furniture embellishment panel with a thickness of 2.5mm having Embossed designed on the surface that can be polished with stain & lacquer. Manufactured from an intricate process where HDF is pressed under very pressure with precisely etched design plates to render exotic designs. Embossed HDF can easily be pasted & nailed on to any substrate. To add a finish a simple 2 tone polish with stain & lacquer can liven up the embossed designs.

• Action Tesa Embossed on HDF sheet at its semi cure stage while other manufactured embossed designs are available on MDF sheet.

• Action Tesa has more depth in Embossed HDF sheets and the depth is normally higher than 0.6mm whereas the others are just 0.2, 0.3mm. This results is a much more beautiful panel on Tesa HDF.

• Action TESA HDF Embossed Panels are ideally suitable for polishing, painting, PVC film pressing, membrane pressing etc.

• Action Tesa is using DOME technology so the moisture content is distributed equally in panels while other panels having high moisture content & moisture is not equally distributed, resulting more complaint. Action Tesa HDF Board which is being specially manufactured in-house with wax so that the paint consumption is much less as compared to any other panel available.

• The molecular structure & IB in Tesa Panels is better than other Embossed Panels because Tesa is Embossing in semi cure (After the Mat formation) while other panels give the Pressure on surface after the MDF get completely cure thus creating destruction in molecular structure.

Laminate Flooring is a floating glue less click locked & sealed flooring similar to a jigsaw puzzle. In this method, the individual planks are locked on to each other by means of clicking together, but do not attach to the sub-floor on which it is being installed. Laminated Flooring is generally a HDF based tongue and groove interlocking flooring system that rest on top of the existing substrate like concrete slab, hard wood flooring or virtually any other flat hard surface that is suitable for installation.

Laminate Flooring is popular due to its ease of installation & its simple maintenance, easy cleaning methods, resistance to stains & a very durable surface due to the "WEAR RESISTANT LAYER".

Ultra Violet Coating is an Acrylic adhesive based decorative lacquer which is cured by Ultra Violet rays in a series of closed chambers. UV Coating is a very polished, lustrous coating applied to a panel surface which could be Melamine impregnated Prelam. The process of UV drying makes the end product Emission Free. The UV lacquering is a fully automated, synchronized PLC controlled process. The lacquering line with a length of 120 meter is aided with a series of online pumps, doctor rolls & double roller coaters that ensures precise & uniform lacquer spread on the wide format 4ft width Action TESA Fibre boards. The lacquered panels are then cured through a series of UV light curing chambers for hardening & the surface texture with an option of a High Gloss.

Action TESA UV Coated Panels are ideal for application in cupboard & kitchen shutters, furniture panels, wall relief paneling, partitions, laminate flooring & a host of applications that shall fire the imaginations of designers and users alike.

Melamine U.V. Coated Panel:A series of 9 layers of UV coating being done on Prelaminated Boards. Decorative paper being used for the surface of boards & a special kind of Prelamination process being adopted to make boards before UV coatings.These panels from TESA have the following advantages:

Super smooth surface of MDF substrateUniform pasting of veneer on MDF due to special pressing technologySolid wood like lookAs the UV coating line is fully automatic so the finish on these panels is uniform all over and gives a great finish100% environment friendly as all products are environment friendlyThe gloss level is more than 98 degree thus giving a mirror finishUV coated is 100% cure so no change in gloss levels with time.Value for money product.Ready to use product as the panel is ready to be used in the application without the efforts of doing any polish on that.

PRODUCT TECHNICAL PARAMETERS:

Available in Prelaminated MDF Exterior Grade - Type-I, Highly Water resistantIS : 14587 (Prelaminated MDF)Prelaminated MDF : 8FT (2440 mm) x 4FT (1220MM) On specific customer demands we can further customize panel sizes in logical sizes variants.Prelaminated MDF : 18mmMelamine UV boards comes in more than 50 color.Melamine UV board comes in standard one side laminated with the same decor (OSL) (except 5 color) with UV Finish only on one side.

Keeping pace with growth and with commitment to serve the rapidly growing interiors industry, Action TESA adds another superior interior product in its basket by introducing High Gloss Acrylic Surface MDF Boards. TESA Acrylic Faced MDF combines the look and feel of a solid surface acrylic with an ultra high gloss surface in a contemporary range of designs and effects.

All TESA Acrylic Surface Boards have a near mirror quality surface (just like a glass mirror) and are easy to install and clean. All they need is a soft, wet cloth. TESA Acrylic Boards have natural colour and unique designs. The collection includes 19 exotic designs suited for any interior and furniture design application.

Application Areas:Action TESA Acrylic Boards can be used in decoration of walls/cabinets or whole styling. They can also be used for household decoration furniture like bedroom/living room/ wardrobe shutters/kitchen shutters and various other multipurpose applications .

Tesa Fibre Boards are being manufactured with Hard Wood so density of our product becomes better than other products available in market. Our Boards are have best routing characteristics due to uniform density gradient & compact core, achieved by using special German Technology for MAT formation & 8 cylinders, 18 day light press (1st in India). Action Tesa has state of the art Glue Kitchen capable

HDHMR - HIGH DENSITY HIGH MOISTURE RESISTANCE:

Hard Wood used for higher density of productSpecial Glue being used to make it Water Resistant Product as per Indian climateWater Resistance Characteristics as per ISI StandardIdeal Routable Substrate with Sharp Cut & Routed EdgeReady & Smooth Surface which absorbs less paint in painting process thus saves paint cost alsoEasy WorkibilityCost Effective Paneling Solution

THE KEY APPLICATION AREAS OF HDHMR:

Kitchen ShuttersFurniture where risk of moisture existDoor ShuttersPacking IndustryShoe HeelPartitionsOutdoor Fixtures like election cutouts or similar applications.
Types of surface finish- Suede & Matt.

HIGH DENSITY HIGH MOISTURE RESISTANCE(HDHMR) EG

Product Specification:

• Water Resistance
• Termite Resistant
• Environment Friendly
• Cost Effective
• Higher Density
• Higher Strength
• Ready & Smooth Surface

A HDF based wall, ceiling & furniture embellishment panel with a thickness of 2.5mm having Embossed designed on the surface that can be polished with stain & lacquer. Manufactured from an intricate process where HDF is pressed under very pressure with precisely etched design plates to render exotic designs. Embossed HDF can easily be pasted & nailed on to any substrate. To add a finish a simple 2 tone polish with stain & lacquer can liven up the embossed designs.

• Action Tesa Embossed on HDF sheet at its semi cure stage while other manufactured embossed designs are available on MDF sheet.

• Action Tesa has more depth in Embossed HDF sheets and the depth is normally higher than 0.6mm whereas the others are just 0.2, 0.3mm. This results is a much more beautiful panel on Tesa HDF.

• Action TESA HDF Embossed Panels are ideally suitable for polishing, painting, PVC film pressing, membrane pressing etc.

• Action Tesa is using DOME technology so the moisture content is distributed equally in panels while other panels having high moisture content & moisture is not equally distributed, resulting more complaint. Action Tesa HDF Board which is being specially manufactured in-house with wax so that the paint consumption is much less as compared to any other panel available.

• The molecular structure & IB in Tesa Panels is better than other Embossed Panels because Tesa is Embossing in semi cure (After the Mat formation) while other panels give the Pressure on surface after the MDF get completely cure thus creating destruction in molecular structure.

Laminate Flooring is a floating glue less click locked & sealed flooring similar to a jigsaw puzzle. In this method, the individual planks are locked on to each other by means of clicking together, but do not attach to the sub-floor on which it is being installed. Laminated Flooring is generally a HDF based tongue and groove interlocking flooring system that rest on top of the existing substrate like concrete slab, hard wood flooring or virtually any other flat hard surface that is suitable for installation.

Laminate Flooring is popular due to its ease of installation & its simple maintenance, easy cleaning methods, resistance to stains & a very durable surface due to the "WEAR RESISTANT LAYER".

Ultra Violet Coating is an Acrylic adhesive based decorative lacquer which is cured by Ultra Violet rays in a series of closed chambers. UV Coating is a very polished, lustrous coating applied to a panel surface which could be Melamine impregnated Prelam. The process of UV drying makes the end product Emission Free. The UV lacquering is a fully automated, synchronized PLC controlled process. The lacquering line with a length of 120 meter is aided with a series of online pumps, doctor rolls & double roller coaters that ensures precise & uniform lacquer spread on the wide format 4ft width Action TESA Fibre boards. The lacquered panels are then cured through a series of UV light curing chambers for hardening & the surface texture with an option of a High Gloss.

Action TESA UV Coated Panels are ideal for application in cupboard & kitchen shutters, furniture panels, wall relief paneling, partitions, laminate flooring & a host of applications that shall fire the imaginations of designers and users alike.

Melamine U.V. Coated Panel:A series of 9 layers of UV coating being done on Prelaminated Boards. Decorative paper being used for the surface of boards & a special kind of Prelamination process being adopted to make boards before UV coatings.These panels from TESA have the following advantages:

Super smooth surface of MDF substrateUniform pasting of veneer on MDF due to special pressing technologySolid wood like lookAs the UV coating line is fully automatic so the finish on these panels is uniform all over and gives a great finish100% environment friendly as all products are environment friendlyThe gloss level is more than 98 degree thus giving a mirror finishUV coated is 100% cure so no change in gloss levels with time.Value for money product.Ready to use product as the panel is ready to be used in the application without the efforts of doing any polish on that.

PRODUCT TECHNICAL PARAMETERS:

Available in Prelaminated MDF Exterior Grade - Type-I, Highly Water resistantIS : 14587 (Prelaminated MDF)Prelaminated MDF : 8FT (2440 mm) x 4FT (1220MM) On specific customer demands we can further customize panel sizes in logical sizes variants.Prelaminated MDF : 18mmMelamine UV boards comes in more than 50 color.Melamine UV board comes in standard one side laminated with the same decor (OSL) (except 5 color) with UV Finish only on one side.

Keeping pace with growth and with commitment to serve the rapidly growing interiors industry, Action TESA adds another superior interior product in its basket by introducing High Gloss Acrylic Surface MDF Boards. TESA Acrylic Faced MDF combines the look and feel of a solid surface acrylic with an ultra high gloss surface in a contemporary range of designs and effects.

All TESA Acrylic Surface Boards have a near mirror quality surface (just like a glass mirror) and are easy to install and clean. All they need is a soft, wet cloth. TESA Acrylic Boards have natural colour and unique designs. The collection includes 19 exotic designs suited for any interior and furniture design application.

Application Areas:Action TESA Acrylic Boards can be used in decoration of walls/cabinets or whole styling. They can also be used for household decoration furniture like bedroom/living room/ wardrobe shutters/kitchen shutters and various other multipurpose applications .