Industrial Valves #2376068

ACE ALLOYS LLPis expertise trader & supplier for high qualitySteel Needle Valves, which is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. Fatigue resistance is lower than that in butt - welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.

Stainless Steel Needle Valvesoffered by ACE ALLOYS are used for lines conveying flammable, toxic or expensive material where no leakage can be permitted. Valves are used only in conjunction with ASME Pipe and are available in the same size range.Carbon Steel Needle Valvesare used in areas where pipe - work is permanent and are designed to provide good flow characteristics.

They are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.Alloy Steel Needle Valvesoffered by ACE ALLOYS is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations. To join pipe toValves and fittingsor to other sections of pipe, fillet - type seal welds be used.

Duplex Steel Needle Valvesare produced to several ASTM standards and are manufactured in accordance with ASME B16.11. ACE ALLOYS also offer theseNickel Alloy Needle Valvesin different sizes, shapes and designs as per customers specifications at affordable rates.

ACE ALLOYS LLPis one of the expertise manufacturer and exporter ofSteel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system.

The purpose of theblock and bleed manifoldis to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then theseStainless Steel Manifold Valves bleedoff or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that components side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component.

Carbon Steel Manifold Valvesis factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification.

ACE ALLOYS also offer theseAlloy Steel Manifold Valvesin different sizes, shapes and designs as per customers specifications at affordable rates.

Best in Class Industrial High Pressure Manifold Valve, 2 Way, 3 Way & 5 Way Manifold Valves Manufacturer & Supplier in IndiaStainless Steel Manifold Valves, Carbon Steel Manifold Valves, Alloy Steel Manifold Valve, Aluminium Manifold Valves, Brass Manifold Valves Stockist & Dealers

ACE ALLOYS LLPis one of the expertise manufacturer and exporter ofSteel Manifold Valves, which is a hydraulic manifold that combines one or more block / isolate valves, and one or more bleed / vent valves, into one component for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system.

The purpose of theblock and bleed manifoldis to isolate or block the flow of fluid in the system so the fluid from upstream of the manifold does not reach other components of the system that are downstream. Then theseStainless Steel Manifold Valves bleedoff or vent the remaining fluid from the system on the downstream side of the manifold. For example, a block and bleed manifold would be used to stop the flow of fluids to some component, then vent the fluid from that components side of the manifold, in order to effect some kind of work (maintenance/repair/replacement) on that component.

Carbon Steel Manifold Valvesis factory tested with nitrogen for leakage at the seat and packing, which is performed with de ionised water at 1.5 times the working pressure; however, other tests like vibration, temperatures, helium and so on are available upon requests. Each and every package is labelled for proper and easy identification.

ACE ALLOYS also offer theseAlloy Steel Manifold Valvesin different sizes, shapes and designs as per customers specifications at affordable rates.

Types of 2 Way, 3 Way & 5 Way Manifold Valves

2 Valve Manifolds
Straight Type	Tee Type
H Type

3 Valve Manifolds
Straight Type	Tee Type
H Type

5 Valve Manifolds
Straight Type	Tee Type
H Type

Monoflange Valves

Dimensions of ANSI/ASME B16.10 Manifold Valves2-Way Manifold Valve

ACE ALLOYS LLPis one of the major manufacturers, suppliers and stockholders of globe valve. Our industrialGlobe Valvesare linear motion valves which are round in shape. They have highly efficient throttling ability for high-pressure systems. Globe valves can be used in systems that work with wide range of temperature extremes or require frequent stroking, vacuum etc.

Globe Valves

These globe valves find its efficient use for on-off service. However, it is also suited for frequent cycling and control of fluids at any point between the open and closed positions. The globe valve is found in mainly three designs- angle design, Y-shaped, and Z- shaped. Globe valves are comes in different types which includeFlanged End Globe Valve, Screwed End Globe Valve, Butt Weld End Globe Valve, Socket Weld End Globe Valveand more.

Globe Valves Specification:

Depending on Globe valve construction material, it can work within temperature range of - 425F to 1100F. The materials may be Steel Globe Valve, Alloy Steel Globe Valves, Aluminium Globe Valves, Brass Globe Valves, and Bronze Globe Valves. Our Globe Valves areavailable in various sizes from .5 to .48 inches and for hand-operated manual valves they weigh up to 13, 000lbs. Globe valves can handle pressure limits from 1480 to 1500psi which is dependent on the material of construction, size, and temperature.

We, at Ace Alloys LLP, make sure to provide the best material according to the clients specification.Our company is well equipped with all kinds of resources for successfully meeting the demand of its products.Contact ustoday to get the best value price for globe valves.

ACE ALLOYS LLPis one of the major manufacturers, suppliers and stockholders of Butterfly valves. OurButterfly Valvesgives high performance to the wide range of applications like cooling water, air, gases, fire protection, compressed air or gas applications etc. It is less costly compared to other valves.

Butterfly valve is a rotational motion valve that requires quarter-turn. A butterfly valve consists of a disc mounted on a rotating shaft. Once the valve is completely closed, the disk blocks the line. The disc is at a right angle to the flow, when the butterfly valve is fully opened. Butterfly valves are of different types like Eccentric Butterfly Valve, Flanged Butterfly Valve, Lugged Butterfly Valve, Wafer Butterfly Valve, and Butt Weld Butterfly Valve

Butterfly Valve Specifications:

Depending on Butterfly valve construction material, they have high resistance to chemicals. They can even handle temperatures up to 200C. The materials may be Steel Butterfly Valves, Alloy Steel Butterfly Valves, Aluminium Butterfly Valves, Brass Butterfly Valves, Bronze Butterfly Valves, each adapted to different pressures and different usage.

We, at Ace Alloys LLP, make sure to provide the best material according to the clients specification.Our company is well equipped with all kinds of resources for successfully meeting the demand of its products.Contact ustoday to get the best value price for butterfly valves.

Check valvesare safety valves that allow fluids to flow in only one direction. It is self-activating in nature. It prevents liquid flow reversal in the system which might damage the equipment. Check valves are of different types which includeSolenoid Valve, Relief Valve, Ball Check Valve, Lift Check Valve, Swing Check Valve, Wafer Check Valve, Pilot Operated Check Valvesand more.

Check Valves Specification:

Check valves are made of different types of construction materials like Steel Globe Valve, Alloy Steel Globe Valves, Aluminium Globe Valves, Brass Globe Valves, and Bronze Globe Valves. Performance will always depend on the size and material of the valves. The pressure drop is calculated based on the check valve being completely open. However, if the check valve is only partially open, the pressure drop will be greater than calculated because the flow passage will get restricted by the disc.

We, at Ace Alloys LLP, make sure to provide the best material according to the clients specification.Our company is well equipped with all kinds of resources for successfully meeting the demand of its products.Contact ustoday to get the best value price for check valves.

ACE ALLOYS LLP is one of the majorDiverter Valves Manufacturers, suppliers in India. Our high-quality flow diverter valves supplies help to move material from one source to two or more destinations. For example in a dilute or dense phase conveying system it helps to direct bulk solids into different destinations. Diverter valves are mostly used to handle powders, dry solids while some types can handle liquid service. They find best applications where pumping of materials to multiple vessels or silos is needed. Diverter valves are of different types which includeFlow Diversion Valve, Universal Diverter Valve, Rotary Diverter Valves, Two & Three Way Diverter Valves, and Dual Tunnel Diverter Valve.

Diverter Valves ANSI/ASME B16.10 Specification:

Diverter valves are made of different types of construction materials likeStainless Steel Diverter Valves, Alloy Steel Diverter Valves, Aluminium Diverter Valves, Brass Diverter Valves, and Bronze Diverter Valves. Performance will always depend on the size and material of the valves. For Diverter valve, pressure range is up to 87 psi. It can operate in temperature up to 100oC. Diverter valves are used extensively in a wide range of industries like agriculture and farming, aviation and aerospace, chemical manufacturing and processing, construction, coolant, food processing, sanitation and waste processing, medical and pharmaceutical services etc.

We, at Ace Alloys LLP, make sure to provide the best material according to the clients specification.Our company is well equipped with all kinds of resources for successfully meeting the demand of its products.Contact ustoday to get the best value price for Diverter valves.

ACE ALLOYS LLPis one of the leading manufacturers, suppliers and stockholders ofGate Valves /Knife Gate Valves. Gate valves are often used when minimum restriction is desired in a straight-line flow of fluid. Our best in classGate valvesis opened by lifting up a round or rectangular gate through the path of thefluid. One of the distinct features of a gate valve is that the surfaces between the gate and seats are planar.

Gate Valves orKnife Gate Valvesfind applications in Chemical Industries, Electrostatic Precipitators, Vacuum Retorts, Hydrocarbon Refining, and Cooling Water to Turbines, Flash Tank Discharge, Liquor Heating, Grinding etc.

Gate Valves Technical Specification:

Gate Valves or Knife Gate valvesare made of different types of construction materials like Stainless Steel Gate Valves, Alloy Steel Gate Valves, Aluminium Knife Gate Valves, Brass Knife Gate Valves and Bronze Knife Gate Valves. Performance will always depend on the size and material of the valves. Gate valves may have different types of bonnets like screw-in, union, or bolted bonnet. These bonnets provide anti-leakage closure to the valve body. These are mostly used in case of high pressure services, typically in excess of 2250 psi.

We, at ACE ALLOYS LLP, make sure to provide the best material according to the clients specification.Our company is well equipped with all kinds of resources for successfully meeting the demand of its products.Contact ustoday to get the best value price for gate valves or knife gate valves.

ACE ALLOYS LLP is a renownedAir Valves Manufacturer& Supplier in the contemporary market. We manufacture Air Release Valves or Air Relief valves with different sizes and shapes keeping the customers convenience in view. It is our pride to say that Air Release Valves Brand of ours has its own importance. Thence our Air valves have huge demand. So we always maintain substantial quantity of air valves stock.

We use ultra-superior metals to manufacture flawless and rust free SS Air Release Valves andAlloy Steel Air Valves. Our raw materials are lent from honest and genuine vendors. Our Aluminium Air Release Valves and Brass Air Release Valves are noted for their exemplary properties like toughness and corrosion resistance.

Cast Iron Air Valves are our other variety of valves which we produce in different types. Keeping the clients industrial parameters in view, customized Double Acting Air Valves are designed. We reassure corrosion and sturdiness resistantKinetic Air Valvesat affordable prices.

Our Single andDouble Air Lock Valvesare finely finished to ensure extreme dimensional accuracy. Our professional employment personnel are well trained to fabricate Single / Double Orifice Air Valves using latest design techniques. For the distinguished properties of our Tamper Proof Air Valves they have many industrial applications.

Non-return valves regulate a fluid or gas to flow in single direction. ACE ALLOYS LLP is an eminentNon-Return Valves(NRV Valves) Manufacturer, Supplier in the contemporary market. For the exceptional features of our Industrial Non-Return Relief Valves, they have wide range of applications. OurNon-Return Relief Valvesare noted for their quality and flexibility due to which they have huge demand. Thence we always maintain Non-Return Valves Stock in huge quantities.

The Non-Return Valves Types that we manufacture are innumerable. Our Clapper type non return valves manipulate the pressure conditions ensuring the liquid to flow in the right direction. We carefully design spring type non return valves keeping all the pressure levels in view. Depending upon theNRV Valvesspecification, we finely finished our products with extreme dimensional accuracy.

We choose premium quality raw material to produce flawless and rust freeStainlessSteel Non Return ValvesandAlloy Steel Non Return Valves. All of our metals are lent from honest and genuine vendors. OurAluminium Non Return Valvesand Brass Non Return Valves exhibit properties like corrosion resistance and durability. On the other hand, our Bronze Non Return Valves are employed in cooling systems, heating systems, and domestic water systems.

Dual Plate Check valveswhich basically are of five types, have various mechanical applications. ACE ALLOYS LLP is an illustriousDual Plate Check valves Manufacturer & Supplierof various sizes and grades. Our Dual Plate Check valves uses are countless for which they have considerable customer demand. Hence we always ensure to maintain large quantities of dual plate check valves stock.

We manufacture all the dual plate check valves types using raw material of superior quality. Wafer dual plate check valves are generally bolted around outside, and are clamped between two flanges. On the other hand the bolting ofLug Dual Plate Check Valvespasses through their body. The installation process ofFlange Type Dual Plate Check Valvesis same as that of studs and nuts.

Depending upon Dual Plate Check Valves Specification, we design them with precise dimensions. The metal used for the fabrication of our products is lent from renowned and honest vendors.

OurStainless Steel Dual Plate Check Valvescan retain their toughness even in elevated temperatures. They can also withstand against various types of hazardous corrosions. OurAlloy Steel Dual Plate Check ValvesandAluminium Dual Plate Check Valvesare deployed in various industries for their elegance. For the distinguished properties of our brass dual plate check valves and bronze dual plate check valves, they are exported to many other countries.

Wafer Dual Plate Check Valvesare one of the five main kinds of Dual Plate check valves.They are generally used to clamp or connect two or more flanges. Unlike other Dual Plate check valves, these are bolted outside. That is why, they have innumerable industrial applications. ACE ALLOYS LLP is a renownedWafer Dual Plate Check Valves Manufacturer & Supplierof the market. We contribute our products with high quality and affordable prices. Thence we have a crew of extremely satisfied clientele.

Due to the huge demand for our products, we always keep dual plate wafer check valves stock substantial and sufficient. We lend high quality raw material from eminent vendors to produce flawlessStainless Steel Wafer Dual Plate Check Valves.Metals are initially purified and checked for any kind of rust. Hence our Alloy Steel Wafer Dual Plate Check Valves are long lasting and corrosion resistant.

We employ well trained and experienced personnel to designAluminium Wafer Dual Plate Check Valvesusing latest fabrication techniques. Our Brass Wafer Dual Plate Check Valves retain their strength despite elevated temperature and pressure. Also, we fabricateBronzeWafer Dual Plate Check Valvesin all sizes keeping all the national and international standards in view. Depending upon wafer dual plate check valves specification we finely finish our products with extreme dimensional accuracy.

ACE ALLOYS LLP is a professional Lug Dual Plate Check valves Manufacturer & Supplier in the country. We offerLug Type Dual Plate Check Valveof sizes ranging from 40 mm to 500 mm. We design and manufacture Dual-Plate Lug Check Valves at our state of the art technologically efficient warehouses that use modern machinery. We pride ourselves in our ready to sale inventory that is ready to be shipped at a moments notice of all our clients.

We are one of the leading organizations, engaged in manufacturing and supplying excellent qualityAlloy Steel Lug Dual Plate Check Valveswhich are known for their sturdiness and strength. Our Bronze Lug Dual Plate Check Valves is a non-return valve that is much stronger, lighter in terms of weight and smaller in size as compared to conventional swing lift check valve. Its design has distinct advantages over conventional swing check valve.

We manufactureStainless Steel Lug Dual Plate Check Valvesof different cracking points such as 0.35 bar and 4.5 bar among other on demand valves. We are also known for our Brass Lug Dual Plate Check Valves that meet the national and international standards, to suit the needs of our clients in various industries and sectors.

ACE ALLOYS LLP is an eminentFlanged Dual Plate Check ValvesManufacturer & Supplier based in India. We have state of the art technologically equipped ware housing facilities that use modern machinery for the fabrication of flange type dual plate check valves.

We maintain a ready to sale inventory ofStainless Steel Flange Type Dual Plate Check Valves, Alloy Steel Flanged Dual Plate Check Valves such as Brass Flange Type Dual Plate Check Valves and Bronze Flanged Dual Plate Check Valves of varying sizes and thickness that guarantees high tensile strength along with optimum and robust performance. Our products are highly commended across the industries and meet the required national and international standards.

Our quality controllers strictly supervise the fabrication ofAluminium Flange Type Dual Plate Check Valvesthat are designed based on varied parameters of quality before the delivery of these products to the desired locations. We are also known for our flanged type dual plate check valve that meets the national and international standards, to suit the needs of our clients in industries such as construction and marine sectors. Remember us for all your check valve needs that are high in quality and in compliance with theIndustrial Flanged Dual Plate Check Valvesspecification.