"WANKAI" Brand "WK-901" PET resin bottle grade is TPA-based polyethylene terephthalic copolymer. It is a high molecular weight polymer for general use in manufacturing containers. It can be used in the production of making packing bottles for carbonated soft drink like cola and 3-gallon, 5-gallon big bottles.

Bottles made from WK-901 resin can meet the requirement of high optical clarity and glossing, good barrier properties to oxygen, carbon dioxide and moisture. And enlong the shelf life and prevent the possible bottle cracking during transportation

IMPORTANT NOTICE FOR USE IN PROCESSING

Drying

Drying is necessary prior to the melt processing to prevent the resin from hydrolysis. Typical drying conditions are an air temperature of 160-180, 4-6 hours residence time.

Repol H050MN is recommended for injection molding and sheet extrusion. It is an ideal choice as a compounding base and as a blending material in furniture compounds. It is also suitable for molding rigid containers, houseware and thermoware. Repol H050MN contains nucleating agent for high rigidity and reduced cycle time. It also contains antistatic agent that reduces static charge build up on products.

Typical Processing Conditions

Melt temperature: 220 – 260 OC

Mold temperature: 20 – 50 OC

Note: Processing parameters mentioned above are for reference only and not to be considered as specifications. They may vary based on the product to be manufactured.

Applications

Furniture and rigid packaging.

Regulatory Information

The product complies with Indian Standard IS 10910 on “Specification for polypropylene and its copolymers for safe use in contact with foodstuffs, pharmaceuticals and drinking water. It also conforms to IS 16738:2018 on positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21, 177.1520, Olefin polymers

Storage Recommendations

Bags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight

Product Characteristics:

Polysure F0146D is a 1-Hexene co-monomer based High Density Polyethylene, produced by Advanced Dual Loop Slurry MarTECHTM technology, suitable for Blown Film Extrusion process. F0146D resin comes with a combination of excellent processability, good bubble stability, superb mechanical properties and high filler loading characteristics.

Recommended Applications:

General purpose packaging, Kirana bags, Shopping bags, T-shirt bags, Liners, Trash bags, Multilayer films

Processing Guidelines:

• Barrel Temperature : 180 - 220°C

• Die Temperature : 190 - 210°C

Storage & Handling:

Bags should be stored in dry & dust free environment at temperature below 50°C and Prevent from direct exposure to sunlight & heat to avoid quality deterioration.

Regulatory Requirements:

F0146D to be manufactured complying the requirements specified in IS 10146 on “Specification for Polyethylene for its safe in contact with Foodstuff, Pharmaceutical & Drinking water”. Furthermore, the Additives added in this grade formulation compiles to the “Positive list of constituents for Polypropylene, Polyethylene and their Copolymers for its safe use in contact with Foodstuffs & Pharmaceuticals' as laid down under IS 16738:2018. In general, the additives & constituents used in the grade are in line with requirement laid down under FDA: CFR Title 21, 177.1520, Olefin Polymers.

DESCRIPTION

Borstar® RA140E is a BNT Nucleated high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) natural colored.

APPLICATIONS

Borstar® RA140E together with the appropriate additive package is recommended for the production of PP-R pipes and fittings used in: Heating, Plumbing, Domestic water, Relining, and Industrial applications

SPECIFICATIONS

Borstar® RA140E is intended to fulfill the following standards and regulations, providing the appropriate industrial manufacturing standard procedures are used and a continuous quality system is implemented: DIN 8078, DIN 8077 and EN ISO 15874

SPECIAL FEATURES

Borstar® RA140E is a natural grade used for production of pipes and fittings. The material is in pellet form and includes selected additive package which ensure:

• Enhanced process ability High temperature resistance
• Economical pipe production Low incidence on taste and odour
• Excellent product consistency Good impact strength

The pipe systems will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustations and fast and easy installation

STORAGE

Borstar® RA140E should be stored in dry conditions at temperature bellow 50°C and protected from UV-light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on physical properties of this product

SAFETY

The product is not classified as a hazardous preparation.

Please see our Safety Information Sheet (SIS) for details on various aspects of safety, recovery and disposal of the product, for more information contact your Borouge representative.

RECYCLING

The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling

"WANKAI" Brand "WK-901" PET resin bottle grade is TPA-based polyethylene terephthalic copolymer. It is a high molecular weight polymer for general use in manufacturing containers. It can be used in the production of making packing bottles for carbonated soft drink like cola and 3-gallon, 5-gallon big bottles.

Bottles made from WK-901 resin can meet the requirement of high optical clarity and glossing, good barrier properties to oxygen, carbon dioxide and moisture. And enlong the shelf life and prevent the possible bottle cracking during transportation

IMPORTANT NOTICE FOR USE IN PROCESSING

Drying

Drying is necessary prior to the melt processing to prevent the resin from hydrolysis. Typical drying conditions are an air temperature of 160-180, 4-6 hours residence time.

Repol H050MN is recommended for injection molding and sheet extrusion. It is an ideal choice as a compounding base and as a blending material in furniture compounds. It is also suitable for molding rigid containers, houseware and thermoware. Repol H050MN contains nucleating agent for high rigidity and reduced cycle time. It also contains antistatic agent that reduces static charge build up on products.

Typical Processing Conditions

Melt temperature: 220 – 260 OC

Mold temperature: 20 – 50 OC

Note: Processing parameters mentioned above are for reference only and not to be considered as specifications. They may vary based on the product to be manufactured.

Applications

Furniture and rigid packaging.

Regulatory Information

The product complies with Indian Standard IS 10910 on “Specification for polypropylene and its copolymers for safe use in contact with foodstuffs, pharmaceuticals and drinking water. It also conforms to IS 16738:2018 on positive list of constituents for polypropylene, polyethylene and their copolymers for its safe use in contact with foodstuffs and pharmaceuticals. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21, 177.1520, Olefin polymers

Storage Recommendations

Bags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight

Product Characteristics:

Polysure F0146D is a 1-Hexene co-monomer based High Density Polyethylene, produced by Advanced Dual Loop Slurry MarTECHTM technology, suitable for Blown Film Extrusion process. F0146D resin comes with a combination of excellent processability, good bubble stability, superb mechanical properties and high filler loading characteristics.

Recommended Applications:

General purpose packaging, Kirana bags, Shopping bags, T-shirt bags, Liners, Trash bags, Multilayer films

Processing Guidelines:

• Barrel Temperature : 180 - 220°C

• Die Temperature : 190 - 210°C

Storage & Handling:

Bags should be stored in dry & dust free environment at temperature below 50°C and Prevent from direct exposure to sunlight & heat to avoid quality deterioration.

Regulatory Requirements:

F0146D to be manufactured complying the requirements specified in IS 10146 on “Specification for Polyethylene for its safe in contact with Foodstuff, Pharmaceutical & Drinking water”. Furthermore, the Additives added in this grade formulation compiles to the “Positive list of constituents for Polypropylene, Polyethylene and their Copolymers for its safe use in contact with Foodstuffs & Pharmaceuticals' as laid down under IS 16738:2018. In general, the additives & constituents used in the grade are in line with requirement laid down under FDA: CFR Title 21, 177.1520, Olefin Polymers.

DESCRIPTION

Borstar® RA140E is a BNT Nucleated high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) natural colored.

APPLICATIONS

Borstar® RA140E together with the appropriate additive package is recommended for the production of PP-R pipes and fittings used in: Heating, Plumbing, Domestic water, Relining, and Industrial applications

SPECIFICATIONS

Borstar® RA140E is intended to fulfill the following standards and regulations, providing the appropriate industrial manufacturing standard procedures are used and a continuous quality system is implemented: DIN 8078, DIN 8077 and EN ISO 15874

SPECIAL FEATURES

Borstar® RA140E is a natural grade used for production of pipes and fittings. The material is in pellet form and includes selected additive package which ensure:

• Enhanced process ability High temperature resistance
• Economical pipe production Low incidence on taste and odour
• Excellent product consistency Good impact strength

The pipe systems will show high durability, no corrosion, good weldability, homogeneous joints, low tendency to incrustations and fast and easy installation

STORAGE

Borstar® RA140E should be stored in dry conditions at temperature bellow 50°C and protected from UV-light. Improper storage can initiate degradation, which results in odour generation and colour changes and can have negative effects on physical properties of this product

SAFETY

The product is not classified as a hazardous preparation.

Please see our Safety Information Sheet (SIS) for details on various aspects of safety, recovery and disposal of the product, for more information contact your Borouge representative.

RECYCLING

The product is suitable for recycling using modern methods of shredding and cleaning. In-house production waste should be kept clean to facilitate direct recycling