We offer Hydrotite Elastomeric Fluid. HYDROTITE Elastomeric Fluid-Applied Waterproofing Membrane is a single component, cold-applied, rubberized emulsion which cures to provide a heavy duty seamless, rubber-like membrane for use in waterproofing or damp proofing concrete or masonry surfaces above and below grade.

We offer Hi-fix. Hi-Fix is non-remulsifiable , acrylic latex binding agent and admixture, which is supplied as a ready to use white liquid. This high performance polymer is formulated as a bonding agent for cementitious mortars and toppings and as an admixtures to site mixed or prepackagedcement based mortars.It also serves as a Bond Coat to repair sections. This binder can be used as a resurfaceor or patching compound for the repairs of floors, roofs and ceilings. Advantages Forms permanent, positive chemical and mechanical bond to sound surfaces. Single component liquid can be easily gauged as required. Improved cohesion and workability. As an admixture, Increases abrasion and impact resistance , early and ultimate flexural tensile and compressive strengths.

We offer Hi Guard. Hi-Guard is a ready to use single component liquid rubber polymer dispersion which dries to form a thin, seamless, load bearing elastomeric waterproof membrane.It is fast drying, breathable, produces a continuous moisture barrier with outstanding adhesion.Easily applied with Brush, Roller, Trowel or Sprayer. Advantages Convenient –Ready to use, can be easily applied by Brush, Roller or spray. Protects substrates from damage by water penetration. Tough, Durable, Long term protection. Elostomeric-Isolates cracks up to 18”(3mm). Inhibits the growth of mold & mildew. Good Weather resistance and offers excellent resistance to uv degradation. Breathable. Solvent free-Environmentally friendly. Fast Setting. Safe –Non flammable. Ease of Maintenance. Install tile, brick and stone directly onto membrance.

We offer Hi-adhesive. Hi-Adhesive is a polymer modified cement based high quality tile adhesive used for the permanent fixing of ceramic tiles, marble and Natural stones. ADVANTAGES: High strength for fixing of Marble, Cearmic tiles and Natural stones. Easy application on old tiles. Block work and rendered brick work surfaces. High polymer content providing good flexibility Long pot and open time. Water-resistant is excellent. Non-Toxic, easy to apply.

We offer Hi-aac Adhesive. With increasing use of Autoclaved Aerated Concrete (AAC) blocks in new age buildings and due to its highly absorbent nature, there emerges a need to use an adhesive which would hold these blocks in place. AAC Block Adhesive does exactly that and sticks to the best. It holds porous blocks together much more efficiently than the traditional fixing system does. It is designed for use with water to produce high strength thixotropic mortar for laying blocks or smoothing over the block work surface in layers of up to 12 mm thickness. Some of the salient advantages using this adhesive include: • Long working time • No curing required after block work is done • Improved adhesion between blocks • Strong, flexible and shock & impact resistant • Thin jointing with high adhesion to contribute to load bearing capacity of masonry • Suitable for both interior and exterior surfaces

We offer Hi-shield. HI-Shield is a two component acrylic polymer modified camentitious coating which consists of Hi-Shield Powder and Hi-Shield liquid for concrete, slabs and masonry.hi-Shield has excellent bonding property to mortars, concrete , brick work.The flexible and elastomeric nature of the system has properties which are able to combat the inadequacies of cement like low flexural strength and tensile strength, low flexuralstrength, and thin section fragility. The resultant system offers a tough, hard wearing surface with abrasion, chemical and weather carbonation resistance coupled with excellent waterproofing effect.It is non toxic and thus usalble for coating structures storing potable water. Advantages: Excellent adhesion to most building substrates. Minimum surface preparation needed low labour costs. Improves flexural, tensile and thin section fragility of cementitious system. Allows breathing thus preventing peeling and scaling Gives a tough, hard wearing surface with effective waterproofing

We offer Hydrotite Elastomeric Fluid. HYDROTITE Elastomeric Fluid-Applied Waterproofing Membrane is a single component, cold-applied, rubberized emulsion which cures to provide a heavy duty seamless, rubber-like membrane for use in waterproofing or damp proofing concrete or masonry surfaces above and below grade.

We offer Hi-fix. Hi-Fix is non-remulsifiable , acrylic latex binding agent and admixture, which is supplied as a ready to use white liquid. This high performance polymer is formulated as a bonding agent for cementitious mortars and toppings and as an admixtures to site mixed or prepackagedcement based mortars.It also serves as a Bond Coat to repair sections. This binder can be used as a resurfaceor or patching compound for the repairs of floors, roofs and ceilings. Advantages Forms permanent, positive chemical and mechanical bond to sound surfaces. Single component liquid can be easily gauged as required. Improved cohesion and workability. As an admixture, Increases abrasion and impact resistance , early and ultimate flexural tensile and compressive strengths.

We offer Hi Guard. Hi-Guard is a ready to use single component liquid rubber polymer dispersion which dries to form a thin, seamless, load bearing elastomeric waterproof membrane.It is fast drying, breathable, produces a continuous moisture barrier with outstanding adhesion.Easily applied with Brush, Roller, Trowel or Sprayer. Advantages Convenient –Ready to use, can be easily applied by Brush, Roller or spray. Protects substrates from damage by water penetration. Tough, Durable, Long term protection. Elostomeric-Isolates cracks up to 18”(3mm). Inhibits the growth of mold & mildew. Good Weather resistance and offers excellent resistance to uv degradation. Breathable. Solvent free-Environmentally friendly. Fast Setting. Safe –Non flammable. Ease of Maintenance. Install tile, brick and stone directly onto membrance.

We offer Hi-adhesive. Hi-Adhesive is a polymer modified cement based high quality tile adhesive used for the permanent fixing of ceramic tiles, marble and Natural stones. ADVANTAGES: High strength for fixing of Marble, Cearmic tiles and Natural stones. Easy application on old tiles. Block work and rendered brick work surfaces. High polymer content providing good flexibility Long pot and open time. Water-resistant is excellent. Non-Toxic, easy to apply.

We offer Hi-aac Adhesive. With increasing use of Autoclaved Aerated Concrete (AAC) blocks in new age buildings and due to its highly absorbent nature, there emerges a need to use an adhesive which would hold these blocks in place. AAC Block Adhesive does exactly that and sticks to the best. It holds porous blocks together much more efficiently than the traditional fixing system does. It is designed for use with water to produce high strength thixotropic mortar for laying blocks or smoothing over the block work surface in layers of up to 12 mm thickness. Some of the salient advantages using this adhesive include: • Long working time • No curing required after block work is done • Improved adhesion between blocks • Strong, flexible and shock & impact resistant • Thin jointing with high adhesion to contribute to load bearing capacity of masonry • Suitable for both interior and exterior surfaces

We offer Hi-shield. HI-Shield is a two component acrylic polymer modified camentitious coating which consists of Hi-Shield Powder and Hi-Shield liquid for concrete, slabs and masonry.hi-Shield has excellent bonding property to mortars, concrete , brick work.The flexible and elastomeric nature of the system has properties which are able to combat the inadequacies of cement like low flexural strength and tensile strength, low flexuralstrength, and thin section fragility. The resultant system offers a tough, hard wearing surface with abrasion, chemical and weather carbonation resistance coupled with excellent waterproofing effect.It is non toxic and thus usalble for coating structures storing potable water. Advantages: Excellent adhesion to most building substrates. Minimum surface preparation needed low labour costs. Improves flexural, tensile and thin section fragility of cementitious system. Allows breathing thus preventing peeling and scaling Gives a tough, hard wearing surface with effective waterproofing