GST : 27AAVPC5219Q1Z0
Verified
Write a Review
Our Products
Apparel Fabrics & Dress Materials
2 Products availableSeparators & Strainers
2 Products availableFilter Bags
2 Products availablePolyester Fabrics
1 Products availableFilter Components
1 Products availablePleated Filters
1 Products availableFilter Cartridges
1 Products availableFilters
1 Products available
We are India’s largest manufacturer and exporter of Decatizing Satin Wrapper/Blowing Cloth with the production of more than 70 thousands Meters per month. Satin wrapper cloth are a composition of blend of polyester and cotton (PC) & Cotton & polyamide. Wrapper cloth is used in textile dyeing and processing units for fine finishing of fabrics. The satin wrapper cloth used in finishing, shrinking, lustring, softening of the fabrics. It is used for finishing of all type of fabrics like suiting, shirting, fashion garments, dress material, embroidery lace, designed sarees etc.
The satin wrapper cloth applicable for Semi-continuous or Discontinuous Decatizing Machines, K.D., O.D., TMT, Blowing Machines etc. We produce standard length of satin wrapper cloth upto 1200 meters and width of 350 centimetres
We are manufacturing belting fabrics of Nylon 6 & Nylon 66 which have high strength and durability. We can manufacture Nylon fabrics from 100 – 550 GSM with thickness upto 0.65mm . we have infrastructure which can help to produce roll length upto 1000 mtrs also.
Our impression fabrics are made of High tenacity Nylon yarn which can withstand at high tempreture also. We can also supply fabrics with silicon finish also.
We are manufacturing fabrics for tyre industries also. Our fabrics is used for liner in rubber industries also. We have facility to manufacture liner of Polyester, Nylon , Polypropylene mono yarn as well as Multifilament yarn. We can supply liner fabrics upto width of 3 mtrs ( 120 inches ) also.
We are also manufacturing fabrics which are used in military combat uniform of different units of army. We can supply fabrics in Nylon cotton blend which have high abression properties, good tearing strength and comfort in wearing. Nylon 66 having good strength & abression properties.
Our high performance PP melt blown filters are constructed by 100% polypropylene fibers. There is no deformation in the process line and it has the excellent uniformity. It is available to have a wide selection of micron ratings from 1μm to 150μm.
Applications :
Hydrophobic PTFE, Hydrophilic PTFE , Nylon66 Cartridge Filters remove particles and micro-organisms greater than 0.2μm from gases and liquids. Hydrophilic Nylon66, PVDF Pleated Cartridge Filters are manufactured from N66 membranes, Polyvinylidene fluoride and Polypropylene components used for the broad application compatibility. Hydrophilic PES Pleated Cartridge Filter constructed of Polyethersulfone micro-porous membrane and Polypropylene support components enable superior durability and particle removal performance , and can be used in the various applications.
Hydrophilic PES filter elements are integrity tested after manufacturing using bubble point and air diffusion. Every single cartridge filter is integrity tested during manufacturing to guarantee performance. The materials are on the FDA listed as acceptable things to be portable and edible.
Our PF pleated filter cartridges offer the superior dirt holding capacity and high removal efficiency, compare to the conventional pleated filter cartridges due to their multiple layered construction. Featuring excellent retention rate and high surface area, our PF series filter cartridges are recommended for demanding applications requiring high purity
Applications :
Our string wound filter cartridges are manufactured by computer modeling process . This enhanced design provides higher dirt holding capacity. It has a long life cycle. Its nominal micron ratings are from 1μm to 150μm.
Applications :
With the help of our well equipped stitching facilities we can make centrifuge filteration bags of different sizes with most relevant fabrics. Our bags are made with fabrics which have even pore size and permeability. It results into even filteration throughout the process.
Dust collecting bags are made of different filter media like Polyester, Polypropylene, Arcylic, Ryton, Aramid, etc. They are also treated with different finishes like PTFE, Water Repellent. Dust collecting bags can be supplied as per operation temperatures ranges from 90 – 250 degree. We can also supply bags with antistatic Polyester Nonwoven fabrics which have antistatic properties.
We are one of the distinguished manufactures and suppliers of a Fluid Bed Dryer Bags. FBD Bags (Fluid Bed Dryer Bags) is manufactured using optimum quality raw material. Our FBD bags are made of different fabrics like Polyester/ cotton blended fabric, Epitropic fabrics, Polyester antistatic fabrics. Antistatic yarns dissipates static charge developed during the process. Which avoids any kind of hazard on machines.
Our Company engaged in offering a wide assortments of Micronizer Bag to our clients These Micronizer Bags can be availed in various types so as to meet all types of requiremensts Our bags are featured with comparatively better drying of powder and optimum air flow with fine retention Moreover our Micronizer Bags are well-known for their easy dust release surface during process and anti-stick and lint free surface.
Polypropylene filter fabric is also known as PP fabrics. PP fabrics having high resistance properties to most of the acids, alkalies and reducing agents. Polypropylene filter fabrics are having high strength and lightweight in nature. These fabrics are available in different weaves depends on the particle size.
Bolting cloth is a mesh fabric used primarily for screen printing in Textile industry. The fabric also has applications in filtration. Bolting cloth is a woven fabric manufactured from polyester and nylon yarns and is available in a variety of mesh sizes.
We can manufacture PP Mono Multi claendered fabric which is used in pharma, chemical industries for filteration.
Additional Information:
Payment Terms : L/C, T/T
Packaging Details : Rolls with HDPE packing
Delivery Time : 2 - 3 weeks
Mr. Bhushan (Azad Industries)
J-133, M.I.D.C Tarapur, Boisar, Palghar, Mumbai, Maharashtra - 401506, India
Share us via
View Contact Number 
