Our Products
Conveyors
2 Products availableKitchen Appliances
2 Products availableFruit And Vegetable Processing Machine
2 Products availableDryers
2 Products availableOur product range contains a wide range of Agitator Stirrer, dust extraction unit, Alovera Juice Machine, FLAT BELT CONVEYER and Triturators Machine
We manufacture a wide range of ropp cap sealing machines, Screw Cap Sealing Machine, automatic cap sealing machines and screw cap sealing machines are highly in demand in various industries owing to its capability of tightening most type of caps such as plastic caps, LDPE, HDPE, PET, and glass packaging. We also offer change parts for different sizes and bottles as per the client requirement. We follow stringent quality control procedures in order to avoid discrepancies at clients end.
Ropp Cap Sealing Machine Technical Specification:MODEL NO. APT-200-TBP (Cup Filler)Application: Tea, Green Tea, Herbal Tea etc.TECHNICAL SPECIFICATIONSProduct Application Powder, GranutesSealing Type : 3/4 Side SealRoll Width Width : 90mm, 150mmMachine Motor : HP, Single Phase, 50 hz.Feeding System Volumetric Cup FillerElectrical Supply :220 V, AC, Single Phase, 50 HzPacking Film Any heat seal able laminated rollMachine control Through PLC (Programmable Logic Control)Photocell registration system YesContact Part Stainless SteelHeater Load 150 W x 2 Nos.; 300 W x 2 Nos.Packing film pulling Through electromagnetic clutch and brakeTemperature Controller PID BasedMachine Speed (approx) 25-50 Pouches per Min (With Paper) (Depends upon quantity and product)Power Consumption 2 Kw approx.Machine Motion IntermittentMachine Weight 300 Kg approx.Optional Features (At an extra cost) Batch Coding Device Nitrogen Flushing System Batch Cutting
Features Advantages BenefitsIntermittent Motion Machine Efficient, effective packing Savings on wastageMachine is mechanically cam operated. Machine is centrally controlled, Has digital display System runs in SynchronizationOperator Friendly / Low Easy to Operate/Less Servicing High Run Time / IncreasedMaintenance Machine Required ProductivityStainless steel contact parts No rusting Long LifeMachine is castor mounted Ease of installation and shifting Savings On laborBatch Coding Device To print M.R.P, Month of packing, Lot No. Etc. Helps in detecting manufacturing and expiry date.Machine is equipped with PID Displays / controls Sealing Temperature of Sealers Optimum Temperature for Sealing / Better SealingPhoto cell registration Unit (Reads the photocell mark) To seal and perforate the pouch at right length Pouch printed layout in place, consistency in pouch size,
OUTSTANDING FEATURESLow Cost Simple operation.Mounted on movable castor wheelsAvailable fully clad with stainless steel aisi 304, and complete stainless steel aisi 304 contact partsElectrical / mechanical protections as per European / American standards.Available for 220 volts / 110 volts AC power supplyAccurate filling and easy weight adjustment with a high precision volumetric cup fillerSelf contained, ready to use machine. Does not require any compressorAll contact parts made of stainless steel constructionTECHNICAL SPECIFICATIONSealing Type . 3-side sealPacking Size . Repeat Length : 62 mm , Film Width : 62 mmString And Tag . String Length 160 mm , Tag Dimensions : 28 mm x 24 mmPacked Weight . 1 gram to 3 gramsPacking Speed . Single track: 30 to 60 sachets per minute.Packing Material . Heat Sealable Tea Bag Paper.Electricals . AC 220V 50Hz / 110V 60 Hz Single Phase, Available with electronic speed control, PID Digital Temperature Controllers, Safety :Features available to comply with international safety norms.Machine Dimensions . L x W x H : 750 x 560 x 1800 (mm)Crate Dimensions . L x W x H 965 x 760 x 1900 (mm)Machine Weight . 350 Kg. Net. 430 Kg. Gross
Our customers can avail from us an excellent quality range of Flow Wrap Machine. Designed with highest precision by using the modern technology and best quality components, this flow wrap machine is provided in various specifications. Moreover, this flow wrap machine is checked in terms of quality at our end before the delivery. We provide this flow wrap machine at affordable range to our clients.
Features:
Longer working lifeHigh functionalityRigid construction
Applications:
Conveyor length as per customer requirementAutomatic counter attachment for biscuitsAutomatic size & toffee cutter attachment for Toffee bars
Optional:
For size Changing, Variators are providedPhotocell control system providedCoding device attachable
Specifications:
Packing Size Length 100-300 mmPacking Material Any heat sealable laminated materialOperating Speed 20-150 pktsminFilm width 80-360 mmMax .Film width 400 mmDimensions 1000x1350x30009 (LBH)Net Weight 700 kg approx.Power required motor load 1Hp DC 220 v single PhaseHeater Load 150 wx8 Pcs, 300 wx2 pcsOscillator 500W
Colloid Mills are used for further grinding of sediments and fiber contents in the pulp, medicines etc to form a clear liquid. The product is processed by high shear, pressure & friction between the stator & rotor. It is also subjected to intensive vibration which exerts their force on it by means of pressing & releasing actions. This processed product continuously leaves the mill through the drain pipe, if required, it can be re-circulated.
SpecificationsCapacity: 10-250 kg/hrPower: 0.5- 10 HPPurpose: Grinding of sediments and fibers from semisolidsApplications: Food, beverages and ayurvedic industryMaterials of construction: Contacts parts in SS, remaining in MS
Screw elevator is used for carrying raw materials from a lower level to an elevated level.Bulk quantity of materials are handled in this machine.
SpecificationsCapacity: 100 5000kg/hrPower: 0.25- 5 HP.Purpose: Lifting of raw materials or productsApplications: Food, ayurvedic, spices, feed and chemical industriesMaterials of construction: Contacts parts in SS, remaining in MS
The use of Fluid-Bed technique on industrial scale, has been considerably on the increase, specially for drying, cooling, calcination, agglomeration, combustion and in many other unit operations, due to its manifold advantages.
Compared to conventional batch and other continuous drying method, Fluid-Bed technology offers several advantages such as, no product lump formation / caking, no particle overheating/ cooling, a well defined product residence time, uniform product quality, better energy economy due to lower specific heat requirements etc.,
In Fluid-Bed" the material is uspended in an upward moving hot-air and the mass behaves like a boiling fluid after "Fluidization".
Thus Fluidization is basically a state of dynamic balance of solids in fluid. Quantity of fine solids in a form of bed are placed on a distributor plate and hot air is passed slowly.
Special Features :
In compliance with cGMP guidelinesModular DesignUniform Drying with reducing Drying timeQuick Dismantling of Dutch Sieve & Perforated Sheet at the Product containerOnline Sampling DeviceFully Automatic Operation through Programmable Logic Controller (Optional)Product Container with Stirrer (Optional)Flameproof Construction (Optional)
Model |
APT-SFBD15 |
APT SLEFBD 30 | APTSFBD 60 | APTSFBD 120 | APTSFBD 200 | APTSFBD 300 | APTSFBD 400 | APTSFBD 500 | APTSFBD 600 |
Container Gross Volume Ltr. | 46 | 71 | 142 | 280 | 475 | 650 | 870 | 1055 | 1350 |
Max. Batch Capacity (0.5 bd) Kg | 10 to 15 | 20 to 30 | 40 to 60 | 80 to 120 | 160 to 200 | 200 to 300 | 300 to 400 | 400 to 500 | 500 to 600 |
Blower Motor HP** |
5 | 7.5 | 10 | 20 | 25 | 30 | 40 | 50 | 50 |
Air Flow(CFM) ± 10 % | 430 | 706 | 1060 | 1880 | 2590 | 3235 | 3825 | 4000 | 4705 |
Steam Pressure (Kg/cm2) | 3.5 | ||||||||
Steam Consumption (Kg/Hr) | 30 | 50 | 80 | 140 | 216 | 250 | 288 | 344 | 384 |
Electric Heater (KW) | 20 | 20 | 36 | 60 | N.A. | N.A. | N.A. | N.A. | N.A. |
Compressed Air Pressure (bar) | 6 | ||||||||
Drying Temp (°C) | 35-80 | ||||||||
Power Supply | 415 V ± 10 %, 3 Phase, AC | ||||||||
** The blower motor of higher capacity will be required in machine if supplied with HEPA, Scrubber & ducting length above 5 meters. |
This tube sealing machine is multi purpose tube sealing machine in which you can adjustable sealing height according to your tube.
Greater performance with best quality tube sealing machine.
Two tubes can be sealed at one stroke of tube sealing machine.
Manual tube sealing machine is basically the best of its class with sealing quality as good as fully automatic tube sealing machine.
The temperature controlled with digital temp. controller Tube sealing machine Electronic sealing timer for easy operation Batch Coding Feature in tube sealing machine Suitable for both plastic and laminated tube sealing machine.Easy change over from one tube size to another.
Attendant | Power Consumption | Output | Machine dimensionl X W X H |
1 operator | 400 W | 10-15 Tubes/min. | 500 x 600 x 1200 |
Dispersing, Suspending, Emulsifying & Homogenizing Technic for Liquid and Paste
Application & Process:
We design and manufacture a wide range of agitators for liquids and Paste for all process in the pharmaceutical, chemical, food, cosmetics and similar industries.
Agitators are provided with different types of agitation components for process such as mixing, blending, dissolution, dispersion, homogenization, reaction, fermentation, oxidation, digestion and emulsification of liquid, paste, ointment, solution, viscous material and solid-liquid.
Salient Features:
Homogenization requires the ingredients to be processed until of a uniform globule or particle size.
For most products, including creams, ointments, sauces, flavoring emulsions and pharmaceutical suspensions, this requires a globule or droplet size in the range of 2 5 microns.
This can be achieved using a Trade Mark Mixer Homogenizer.
The precision machined Trade Mark workhead generates exceptionally high shear rates in a three stage mixing/homogenizing process;
The high speed rotor draws materials into the workhead where they are intensely mixed.
Centrifugal force then drives the materials to the periphery of the workhead and subjects them to mechanical shear in the precision gap between the rotor and stator.
This is followed by intense hydraulic shear, as the product is forced through the stator screen at high velocity and circulated back into the mix.
Fresh material is continually drawn into the workhead, progressively reducing globule or particle size and quickly resulting in a homogeneous, uniform product.
Mini Pulveriser comparises of a heavy duty Mild Steel/Stainless Steel body, which comprises of a feeding hopper, with a feed regulator slide. The pulveriser body is inlaid with a delivery trough attached at the bottom, with a delivery trough attached at the discharged end.
The rotor & beater are mounted on shaft, running in a ball bearing housing at a speed of 4500-6000 R.P.M. The whole unit is mounted on a strong steel channel stand.
Application: The Mini Pulverisers are widely used for grinding of both dry/wet spices, green chilly, fresh ginger, garlic, fresh fruits, vegetables. These machines can also be used as a fruit finisher. The Mini Pulveriser can also be used for the following dry applications like agricultural chemicals, broken biscuits (hi-fat/low fat), custard powder coffee, charcoal, dals, dyes & pigments, fillers, henna leaves, herbs, leaves and roots instant foods insecticides and pesticides, kaolin moulding powders, pharmaceuticals, plastics, poultry feed & marine feed, resins, sugar (biscuit grade/icing grade), stearates, tea etc.
Type of Classification | Screen Type | ||||
Mill Size | T.M.-Mini 6 | T.M.-Mini 7 | T.M.-Mini 8 | T.M.-Mini 12 | T.M.-Mini 18 |
Motor H.P. | 2 | 3 | 5 | 10 | 20 |
Max. Feed Size | 8mm | 10mm | 12mm | 15mm | 20mm |
Mill RPM | 6000 | 6000 | 6000 | 4500 | 4500 |
Fineness Range | 2-100 Mesh |
Intimate and homogenizer mixing of products is employed by planetary motion of beaters and centrally located homogenizer.
Equipments ideally suitable for through mixing of ointments, creams, lotions, tooth paste etc. in sterile or non-sterile conditions.
Product container provided with jacket to heat and cool for circulation of steam/cold water. Mixer is also designed to operate under vacuum to remove air entrapment in product during mixing .
High speed disperser suitable for homogenizing the product with independent drive at the centre.
Applications:
Ointments, Creams, Ceramics, Ink Pastes, Colour, Pigments Rubber, Compound & Adhesives.
Special Features:
MODEL | APT-SLE PLM 200 VJHSE | APT-SLEPLM 350 VJHSE | APT-SLE PLM 600 VJHSE |
Gross Capacity | 220 L | 380 L | 650 L |
Bowl Dia in mm | 750 | 900 | 1100 |
Bowl HT. in mm | 540 | 600 | 700 |
Main Motor HP | 5.0 | 10.0 | 15.0 |
Lifting Motor HP | 1.0 | 1.0 | 2.0 |
Emulsifir Motor HP | 3.0 | 5.0 | 7.5 |
Overall Dimem. In mm | 1100 X 2300 X 2450 | 1350 X 2700 X 2600 | 1600 X 2775 X 2900 |
Net Wt. kgs. | 1600 | 2000 | 3000 |
Gross Wt. kgs | 2200 | 2750 | 3750 |
Coating Machine ideal for film and sugar coating. The machine is available with 12, 24, 30, 36, 42 OR 72 Inch size stainless steel coating pan. The machine is designed with fabricated structure fitted with SS enclosure and drive unit of motor and reduction gear box. Machine has variable speed drive to achieve 8 to 15 RPM by variable speed pulley. The machine is mounted on dynamounts which avoids foundation and vibration.
A hot air blower system is provided separately on trolley for easy cleaning and setting. The system has thermostat controller to selected temperatures between 40 C to 100 C by electric Heater. The complete systems fitted suitable motor, blower, piping and nozzle for hot air flow.
Salient Features:
Optional Features:
Vibro Seperator is a screening unit Vibrating in three planes along the vertical axis. A specially designed Vibratory Motor having eccentric weights at the top accomplishes this and bottom ends of the motor shaft. The motor is mounted vertically at the center of the screening assembly, on a circular base by means of springs, which allow the unit to vibrate freely. The springs absorb the vibrations and prevent them to be transmitted to the floor.
Simple & Compact construction.Faster SeparationDouble & Triple deck screens with outlet and hopper for bottom deck available on request.Lesser Maintenance and Power Consumption than the Conventional Sifter.Easy dismantling and cleaning facility
Models | APT- SLE-VS 20” | APT SLE-VS 30” |
Screen Diameter | 510 mm | 750 mm |
Charging Height | 1000 mm | 1150 mm |
Discharging Height | 600 mm | 750 mm |
Motor | 0.5 HP, 3 Ø, A.C. | 1 HP, 3 Ø, A.C. |
Semi Automatic Liquid Filling Machine Model No-APT-100 H for Semi automatic volumetric liquid filling machines are two head, table top, fully GMP model used to fill variety of liquids. These filling machines work on volumetric principle and is fitted with two syringes on the sides. The desired volume of the machine can be easily adjusted by increasing or decreasing the eccentricity. Motor and gearbox of the liquid filling machines are covered in a SS cabinet.
Operations:
Semi automatic volumetric liquid filling machine can be used for different types of glass, plastic and metal containers
Output 8 / 16 / 24 bottles per minute depending on type liquid and fill size with the help of three speed pulley arrangement
Four head machine can also be provided
Bottles are kept bellow the nozzles manually
These liquid filling machines have two head, tabletop, fully GMP model used to fill variety of liquid
Feature
Filling syringes are available in SS 304 / SS 316 quality
Filling syringes capacity: 200, 550, 1000 ml
Specially designed valve to avoid any drip age
Machine can be provided with diving nozzles for foamy liquids
Specification:
CAPACITY:10-16 Bottle per minute (480 to 1440 bottles per hour)
FULL SIZE:15 ml to 1000 ml. Higher fills possible with multiple strokes
ELECTRICALS:0.5 or 1 hp x 1440 rpm x 3 phase motor with DOL starter.
DIMENSION:920 mm (L) x 480 mm (W) x 700 mm Ht.)
SYRINGE MINIMUM CAPACITY IN ML:10
MAXIMUM CAPACITY IN ml.:1000
Hammer mill is recommended for powdering grains, chemicals, herbs, ores, minerals etc., from fine to coarse powders in bulk quantity. The machine is provided with cyclone dust collector for easy collection of product at discharge end.
SpecificationsCapacity: 70 - 800 Kg/ hrPower: 15-75 HP.Purpose: size reduction of the cereals, grains, spices, etcApplications: Food, spices and ayurvedic industryMaterials of construction: MS or SSProduct size: 250- 1000 microns.
We are engaged in manufacturing and supplying End Runner Mill Machine to our valued customers. Designed and developed in conformity with the industry laid parameters, these machines are introduced imparted with rugged design & sturdy finish. Low in maintenance, these machines are available at industry leading costs.
Dome Shaped bowl which helps the products in to whirling motion with the help of impeller for the better mixing. Inclination of the impeller gives the rising and tumbling motion of the product in the bowl due to the impeller blades of two full and two half solid blades.
Specially designed chopper blade with high speed and uniform granulation through out the product inside the bowl.
For the easy discharge of the product auto discharge with pneumatic system is provided which can be directly discharge in to the FBD bowl.
Salient Features :
Optional Features:
In compliance with cGMP guidelinesModular DesignMixing of substances uniformly and homogeneously with special design Mixer & Chopper blades.Electro-Pneumatic Operated DischargeEffective sealingEasy to clean machineFully Automatic Operation through Programmable Logic Controller (Optional)Binder addition system (Optional)Inline co-mill for uniform granuals. (Optional)Flameproof Construction (Optional)
Model | APT S RMG25 | APT SRMG50 | APT SRMG100 | APT SRMG150 | APT SRMG250 | APTSRMG400 | APT SRMG600 | APT SRMG800 |
Gross Capacity (Ltr) | 25 | 50 | 100 | 150 | 250 | 400 | 600 | 800 |
Working Capacity (Ltr.) | 20 | 40 | 80 | 120 | 200 | 320 | 480 | 640 |
Mixer Motor (HP) |
3/5 | 5/7.5 | 7.5/10 | 10/15 | 22.5/30 | 30/40 | 40/50 | 50/60 |
Chopper Motor (HP) | 1.5/2 | 2/3 | 2/3 | 2/3 | 3/5 | 5/7.5 | 7.5/10 | 10/15 |
Horizontal Pouch Sealing Machine with Nitrogen Gas FlashThis is a newly developed product with improved automatic continuous sealer and gas filling mechanism. Mainly used in the packaging of puffed food, the machine fills the bag with gas before sealing to inflate the bag in order to protect goods during shipping.
Specifications:
Max. conveyor load capacity: 3kgSteel wheel printing
Octagonal Blender, due to its octagonal shape is designed to process larger volume of material.It occupies less space compared to other similar blenders like `V' and Double Cone. Power consumption is also less the blending takes place at low speed during operation.It is well balanced even in higher capacities.
Salient Features:
Application:
In compliance with cGMP guidelinesEffective blending with help of mixing baffles.Quick Dismantling of mixing baffles for easy to clean bins and baffles.Fully Automatic Operation through Programmable Logic Controller (Optional)Flameproof Construction (Optional)
Model | APTOB 50 | APTOB 100 | APTOB 200 | APTOB 300 | APTOB 500 | APTOB 800 | APTOB 1000 | APTOB 1200 | APTOB 1500 | APTOB 2000 |
Gross Capacity (Ltr) | 50 | 100 | 200 | 300 | 500 | 800 | 1000 | 1200 | 1500 | 2000 |
Working Capacity (Ltr.) | 35 | 70 | 140 | 210 | 350 | 560 | 700 | 840 | 1050 | 1400 |
Machine RPM (Max.) | 28 | 28 | 24 | 24 | 16 | 16 | 16 | 16 | 16 | 12 |
Discharge Port | Ø 3" | Ø 4" | Ø 6" | Ø 6" | Ø 6" | Ø 8" | Ø 8" | Ø 10" | Ø 12" | Ø 12" |
Main Drive Motor | 1 | 1 | 2 | 2 | 3 | 5 | 7.5 | 7.5 | 7.5 | 10 |
Power Supply | 415 V ± 10 % , 3 Phase, A.C. |
Construction :External : 2MM Thk, Internal : 2MM THKMOC: cGMP
Surface Finish:External:Buffed to 150 grit matt finish, INTERNAL: Buffed to 220 grit mirror finish.
Inlet & Outlet :All dryers have a 5 micron prefilter at the inlet and a manually infinite adjustable damper at the outlet.
Door :Door is provided at the front and / or rear side of the tray dryer. Door lips are lined with silicon rubber gasket to prevent any leakages. Suitable locking is provided for the doors.
Air Circulation :Air circulation is done by specially designed recirculation blowers inside the tray dryer. The blower capacity , static & design depends on the size and model of dryer.
Heating :Dryers are normally supplied with either steam/ electric/ thermic fluid / hot water heating system. Suitable heating coils / caloriefiers are provided in the dryers.
Temprature Control :Temp control system is done by electronic digital temp controller fitted in the control panel. The temp control in the dryer is fully automatic.
Trays :Trays are available in S.S. 304/ 316 q. All trays are fully die pressed and with cooved corners. Trays are buffed to mirror finish. Trays are also available in aluminium / Polypropelene / Frp/ M.S. galvanized as per clients reqiuirements.
Trolley :Trolley is provided in the dryers to accommodate trays in it. Trolley truck are used to load and unload the trays into the dryer.
Control Panel :Automatic Control panel is fitted on the side of the dryer. If consists of starters, contactors, safety relays, ckt breakers, indicating lamps, push buttons , timers, controllers etc.
Uniform Mixing Process Technique for Dry & Wet Granulation.
Application & Process :
The Mass Mixer is designed for uniformly mixing of dry and wet material and especially suitable for powder of Pharmaceuticals, Food, Herbals, Agro Chemicals & Chemicals.
Salient Features:
We are one of the leading manufacturers and suppliers of a wide array of Kharal Machine that are widely used in pharmaceutical industry for Homeopathic tritturations. These are manufactured at our well equipped fabrication unit by using best grade of factor inputs. Our clients can avail these in standard as well as in customized specifications as per their requirement from 2 kg to 40 kg capacity.
With thorough knowledge of the industry, we are engaged in manufacturing and supplying AloveraJuice Machine. Extensively used to amla juice, Amla Juice Machine are manufactured by using premium quality material and following industry laid norms. Along with this, our experts examine these machines on different parameters of quality and performance, before the final dispatch.Features:Longer service lifeLow maintenanceAccurate dimensionsExcellent performanceHigh durabilityHigh tensile strength
Specifications:
The machine can process 200 to 250 Kg Amla/hrThis is an economical and efficient machine attached with 3hp motor
We are engaged in offering Juice Machines. It includes Aloe Vera Juice Machines, Karela Juice Machine and Amla Juice Machines. We offered products are best suited to clients.
Amla / Kerala Juice ExtractorDETAILS :1 H.P. Motor(220/240 Volt A/c)Weight = 44 Kg. Approx.H=24, W=15.5Cap. = 16 Glass at a time
Can be used to Extract carrot Juice, Amla Juice, Kerala Juice and other fruits and vegetables. Approximate capacity 15 to 20 kg/hr
AYSU PHARMA TECH Present Automatic Liquid Filling Machine Model No-SLE-500-H. We specialize in manufacturing automatic liquid filling machines which are generally used in fill any type of liquid such as juices, petroleum jelly, phanna syrups, drinking water, paints, strainers, perfumes, flavored milk, dahi, adhesives, shampoo, edible oil, hair oil, lube oils, coolants, etc.
Features:
Available with 2/4/6/8 heads attachment
Works on Syringe Base Piston
Able to fill powder/granules into any size and shape of container
Available in SS304. SS316, GMP Models
Quick changeover facility from one container to other
Easy and accurate adjustments of fill desired quantity
Available in Linear & Rotary Format
Made up of hygienic materials for hygienic filling
Maximum tilling accuracy: +/- 0.5-2% by weight output of 20-120 bottles/min.
Compatible with other filling equipments
Available filling range: up to 5Lit. (With different changeable attachments)
Infinite variable speed drive for output control can be provided if required.
Maximum output in minimum possible time
Also available in PLC based control system
Adjustable and space saving
Low power consumption
Flawless performance
We are pleased to be able to offer the fully On Line Induction Cap Sealing Machine-Model APT 100 H. AYSU PHARMA TECHhas a proud history of supplying the most reliable, state of the art Induction Cap Sealing Equipment for over 40 years. They are renowned throughout the world for the performance, reliability and quality of their induction sealers, The latest induction sealer range incorporate many features that make cap sealing easy and reliable:
Features:
The water less induction sealer design eliminates all water cooling pipes, pumps, filters and flow switches
Reduced number of parts for reduced maintenance and increased reliability
The standard Universal coil is suitable for almost all closure types and saves the cost and time of coil changing
Compact design, easily mounted above conveyor
Easy to use microprocessor controls
Mobile induction sealer trolley or conveyor mounted systems availableCan be operated as independent free standing unit or completely integrated into filling line control system
Optional detection and rejection packages are available for missing foil, stalled bottle, cocked caps etc. 1, 3, 4 and 6kw cap sealing machines are available. 1kw induction sealers are suitable for slow to medium speed lines, the popular 2kw unit covers most applications and 4 and 6kw cap sealing machines are suitable for very high speed lines and the largest cap diameters.
Automatic Labeling Machine Model No-APT100 H for Automatic user friendly, Vertical Linear Sticker labeling machine, Suitable for applying SIGLE SIDE labels on Flat/Round shape containers with output Up to 120 Labels per minute depending on products size and label size. Automatic product alignment system synchronized with top holding mechanism.
Features:No Label Data input/retrievals require for any label size.No change parts for label size.Virtually maintenance free machine.Easy to change label application height.User friendly Label placing adjustment.Suitable for on-line inkjet and contact coding system.Built in A.C. Variable drive system.Fully stainless steel finish machine.Along with top holding mechanism.
Specification:Model NoAPT-100 HLabel Height :8mm to 90 mm Special up to 120mm/160mm*Label Length :12mm minimumLabel Roll Dia :300mm maximumCore Dia :75/76 mmElectrical Supply :220vac Single phase power supply/50HZPower :1.5 AmpOut put :Up to 120 product per minute depending uponProduct shape size and label size.Conveyor Height :760 to 840 mmOverall Dimension :1800mm (L) , 1200mm (W) , 1250mm (H)
We are humbled to declare ourselves as the exporter, manufacturer and trader of Biscuit Wrapping Machine. The offered biscuit wrapping machine is often used for the packaging of cream sandwiched biscuits. Our offered biscuit-wrapping machine is capable of packing biscuits of every shape and size. The offered biscuit wrapping machine has a conveyor system, which is fed with the packaging biscuits. Our offered wrapping machine comprises of feed conveyor, fin seal and rollers.
Features:
Automatic self contained unit.All components coming in contact with product are of stainless steel or Food Grade plastic.Ease of change over to different varieties of product in minimum time.A.C. motor with variable frequency Inverter Drive.Separate Temperature Controllers are provided for each pair of Heating rollers and jaws.Cut off Length adjustment by just rotating wheel with Display.Simple to operate and easy to maintain.
MS Powder Coating Belt Conveyor
REQUEST CALLBACK
MS Powder Coating Belt Conveyor Click to
Features:
20 kg box on it. Total box wt 200 kg. (10 nos box)
MS powder coating machine
Width 1.5 feet
3 hp motor
Single speed
Length: 12 feet long
We manufacturer for inclined stand on conveyors, which are designed to take heavy loads up to 100kg and single speed from 14 RPM. The system design is:
Modular bold AssemblyLow running noisePositive belt guidy systemSturdy frame workHeavy duty BeltSmooth product transfer
The application of systems is for conveying big bags , food, pharmaceutical, mechanical, plastic, soup & detergent. The conveyor design mainly used to link up the system for space saving.
MS powder coating Inclined belt conveyor size: - as per your application.
Specification:
M.S. powder coating/SS inclined stand on Belt conveyorLength: as per your applicationconveyor width- as per your applicationconveyor height from bottom as per your applicationMotor 1/ 2 /3 HP Gear Motor, Hindustan Make, made in Indiamotor RPM-1400, Gear box reduction RPM-14 rpmSingle/variable speed MotorRevised foreword switch given for up-down motion.2/3/4/5/6 mm thick step belt for 50-5000 kg LoadConveyor load max as per your application in kg.3 feet cap step Belt use.Belt color: - Black, green or blue. (as per available)fabrication - 14/ 16 gaze MS heavy rod using for conveyor2x2 inch MS pipe using for Avery 6-8 feet conveyor gap for support.MS roller use in bottom support ( 8-10 nos).Motor assemble on top of conveyor side.
We also manufacture 90 /180 degree Turn conveyors, which are designed to take heavy loads upto 100kg and speed variation from 0 - 45 mtr/min.
The system design is:
Modular AssemblyLow running noisePositive belt guidy systemSturdy frame workBelt change within 30 minutesSmooth product transfer
The application of systems is for conveying food, pharmaceutical, mechanical, plastic, soup & detergent. The conveyor design mainly used to link up the system for space saving.
The tea packaging machines are meant for special packaging of variety of tea products. These require accuracy in weighing and packaging.
ApplicationThe machine is used for filling different types of tea and other granuled items
Features
Constructed from SS 304Precise speed using digital sensor that also support anti-jammingHighly accurate weighing and packagingAdvanced digital signal processing
Technical SpecificationsLinear Weigher 4HeadModel L30Hopper 75 litFilling Range 1 to 10 KgsFilling speed 4 to 20 Bags/minAir Required 6 BarPower used 220 V 1 Dimensions 1060L X 1000W X 2500 H (mm).Net Weight 200 Kg Approx
We present quality based Triturators Machine that has been approved by our professionals for its impressive performance. We ensure functional properties that will add to the free flow of the work. The electronics used have been tested at various parameters. Our products are known for their durability and are proven to be immensely hard wearing. The prices we offer are very reasonable
Semi Solid Dozer is simple, user friendly in design, highly accurate and easily operatable. It is an innovated product for filling technology. The machine is tested under various parameters to ensure that it is free from flaws. This is suitable for packing Semi Solids, Pickles, Creams, Leham, Curry Pastes from 5 gm 2 kg. Accuracy of dozing is guaranteed up to maximum 1 gram error irrespective of volume. It can be freely integrated to the fully automatic type also.
Specifications
Capacity: 5-2000gm/doze
Power: 0.5-2 HP
Purpose: Filling of Semi Solids, Pickles, Creams, paint, Putty, Thick oils etc
Applications: This machine is used for filling of semi solid materials like pickle, jam, sauce, cake batter, creams, curry paste, Lehyam etc. to bottles/pouches/containers.
Materials of construction: Contact parts in SS, remaining in MS
This machine is specially developed for blending different types of powders with liquids or semi solids with out lump formation or spillage loss to the liquid ingredients. Turbo jet blender is provided with a high speed turbine and a pressure vessel for blending liquids/semi solids evenly to the powder ingredients.
SpecificationsCapacity: 10-3000 kg/batchPower: 0.25- 20 HPPurpose: Blending of powders with liquids or semi solids.Applications: Food, spices, ayurvedic and chemical industryMaterials of construction: Contact parts in SS, remaining in MS
Double screw juice expeller is used for continuous extraction of juice from leaves, roots, stem, coconut and fruits. The raw material fed between two screws rotates in opposite directions which results in the extraction of juice.
APT300 is a simplified compact rotary designed, single-headed filling & sealing machine. Suitable for an output upto 30 tubes per minute, handles Plastic - Polyethylene, Polyfoil and Laminated type of tubes.
Manual lodging/in feeding of tubes, filling sealing-coding and trimming operation are performed prior to tube discharge similar to the automated version.
Minimal maintenance intervention, accommodating in less then 1/2 square meter space.
A perfect blend between quality components and economical cost, thus rightly meets the needs of a Lab, R&D or Promotional production of an entrepreneur to a mid sized companies.
Main Features:
Milk Kettle
Prominent & Leading Manufacturer from cuddalore we offer Milk Kettle such as Soya Milk Kettle, Milk Boiling Machine and Soya Milk Heating Kettle.Soya Milk KettleMachine Available in Electric as well as Gas heating Options
Cap. Of the Vessel 80 lts
Power Required 6 kw single phase
Equipment uses the technology of thermo fluid heat transfer.
Machine can be used to heat Soya Milk, Amla Aloevera & Kerala Juices.
Also available in digital control model with agitator.
The centrifugal juice extractor is very easy and convienient to use. The machine can be used to extract most of the types of juices like amla, kerela, carrot, orrange etc. Equiped with 1 hp standard make motor, capacity 200 kg/hr and SS 304 make.
Milk Boiling Machine
Pan Capacity 130 lts
2 Blowers of 60 no.
1 hp motor
Oil Capacity 2 lts
Burner 6 "
Khoa making, milk boiling machine. It can easily convert 60 lts milk in to khoa per hour.
Machine can boil 200 lts milk/hr
This container has standard color white and natural. This container is made up of HDPE (High Density Polyethylene) polymer. Lable container is manufactured by the process of EBM (Extrusion Blow Molding). This container is most suited for tablet & powder. Decoration option is also available such as Labeling and Printing.
Recently Viewed Products
Security Tablet Container (Category: Tablet Containers)Round Tablet Container (Category: Tablet Containers)Brut(A) (Category: Pharma Bottles)
Technical Specification
Model APT V-910
Sealing speed 7 mts / min
Heaters 2 cartridge heater of 300w
Power used 440V / 3 or 220V / 1
Temperature range 0-300 C
Temperature controller Digital
Sealing width 3mm-12mm
Sealing property Any heat sealable laminate/Non laminate
Size of packing Bag 100-500mm HxW any size
Maximum sealable thickness of laminate Upto 250 micros
Conveyor belt width 200mm
Conveyor height Adjustable upto 500mm
Conveyor load capacity 25 kilograms
Dimensions 1750Lx 730Wx 1430H(mm)
Net Weight 180kg. Approx.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Model | APT-SLE DE-150 | APT-SSLEDE-300 |
Fan Volume (CFM) | 150 CFM (250 m3/Hour) | 300 CFM (500 m3/Hour) |
Filtration Area | 0.84 m2 | 1.34 m2 |
Dust Storage Capacity | 25 Liters | 40 Liters |
Electric Motor | 1 HP / 3 Phase | 1 HP /3 Phase |
We offer superior quality hand held induction cap sealers for low or high speed cap sealing applications. Our 500 cap sealing system is designed for hand held cap sealing in lower production applications or in R & D laboratories Hand held induction sealer is a highly affordable and productive sealer available with us.
The sealer is highly suitable for keeping your product hermetically sealed, tamper evident, maintain fresh, free from oxidation and contamination, sealed for consumer confidence, leak and evaporation resistant.
Salient Features :
Benefits :
In Inline agitation system, the possibility of materials Liquid or Solid passing through it, without subjected to intense hydraulic and mechanical shear actions is zero. Here suction pipe (inlet pipe) is centrally mounted & outlet is radially mounted , therefore it is physically impossible for any material to pass from inlet to outlet without exposed to agitation.
The stator which surrounds rotor is available with various type of opening i.e. round, square, rectangular & with perforation also so that all the critical demand of Mixing, Emulsifying, Disintegration & Dispersion of solids, suspension can be met out by same equipment.
The machine is versatile & has completely revolutionized the traditional mixing techniques. Here close tolerance of rotor with the stator produces high hydraulic shearing & mechanical action that ensures that material entrapped between rotor & stator is subjected to tremendous shearing actions each minute.
Fluid Mixing Mechanisms:
In terms of mechanical mixing mechanisms, a number of actions are employed by different types of mixers to create different effects for particular process results. For distributive action, swirl created by rotating parts causes laminar thinning of the material interfaces, thereby increasing volumetric combination of the materials. A repeated cutting and folding action of the mixture also increases the distribution of different material components. The effectiveness and efficiency of a mixer in distributive mixing is therefore a function of how the machine interacts with the fluid in a geometric sense.
Conversely, the effectiveness and efficiency of a mixer in dispersive mixing is a function of how the machine interacts with the fluid in a stressing sense. For most materials, the higher the stress, the smaller the resulting particles or droplets in the mixture. However, another very important consideration is the uniformity of the stress field. Without a reasonable uniformity, it is impossible to guarantee that the same stress is applied to all parts of the fluid. This would result in a wide range of final droplet or particle sizes rather than a narrow range obtained with uniform stressing. One or more of the three primary stressing mechanisms are used in most fluid mixers.These mechanisms are:
Inline Mixers:
Usually called "high-shear mixers", are the most common form of Dispersing/Homogenising/ Emulsifying mixer. By placing a form of closely-fitting shroud around a high speed impeller, it is possible to create a shearing action between the blades and stator shroud. As material is centrifugally pumped through the mixing head, some of it will see this high shear zone and experience shear stressing that results in dispersive mixing. Where small or uniform dispersions are required, material must be cycled through the head many times to ensure statistically that all of the material has passed through the high shear zone at least once.
Pumping Action :Because of indigenous design & rotor operating at very high speed in close clearance with stator draws the material in & imparts mechanical & shearing actions. Inline Homogenizer facilitates high volume, non positive action which is sufficient to transfer the material without any supplementary pumps but in some cases because of high viscosity, vertical lift or length of pipe line , the flow rate may come down below the anticipated value, In that case it is supplemented by an auxiliary pump installed in the system which pumps the liquid without reducing the homogenising/emulsifying efficiency of the system.
End Connection :The inlet & outlet are normally fitted with DIN, Tri Clover/ Sanitary Screw fittings but other Modes of fittings can be provided on request.
Sealing :Single mechanical seal with Carbon, silicon carbonized phase combination is provided. Special single or double sealing is also available for conditions & process which demand it eg. Latex , Abrasive solids.
Applications of Inline Homogeniser Emulsifier
Inline emulsifier is successfully used for the following processes :
Recirculatory Processing :There are certain processes which demand higher degree of homogenization, dispersion, comminution & but to attain that level, single passage of material through Inline is not sufficient to reach that degree , in that situation , it is more useful to pass the product several times through the same machine by means of recirculation. The above process is normally adopted in producing emulsion of Oil & Water. Oil , which is lighter than water is charged in the holding vessel & water is added into the pipe line between vessel outlet valve & Inlet of Inline Emulsifier. This mix is immediately sucked into the head of emulsifier & there mixing/ emulsification/ homogenization takes place . This mix is then sent into the vessel. This process is repeated till achievement of perfect emulsion. Where viscosity is very high or vessel size is large, it is recommended to go for Batch type mixer along with Inline Mixer.
Premix Process :In this process, all ingredient are mixed in a holding vessel with some agitator & a single passage through the inline smoothens the lumps and homogenize a suspension or emulsion.
Inline Mixer is currently in use in the industry listed below & this gives a new horizon for this exceptional machine to validate its results.
Salient Features:
Basic Unit:
Production Rate : | 60 to 100 Containers/Min. (APT-SLE 120). |
Input Specification : | |
Container Dia.: | 15mm to 105mm |
Label Length: | 12mm to Unlimited |
Label Height: | 10mm to 160mm |
Label Roll Dia.: | 300mm Max. |
Power Specification : | 1 H.P., Single Phase, 240 Volts, 50 Hz. |
Filling Range : | 10 ml to 1000 ml with the help of suitable change parts. |
Optional Accessories : | Ink Roller Printer |
Programmable Logic Control (PLC) System with MMI | |
Inkjet Printer | |
Aluminum profile cabinet covering full machine | |
Overall Dimension : | 1800mm (L) X 1000mm (W) X 1300mm (H) |
Net Weight: | 350 Kgs. |
Gross Weight: | 575 Kgs. |