Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

AP

Axiom Power Products Pvt Ltd.
location Hyderabad, Telangana

Write a Review
Call Now Call Now

Our Products

  1. LED Lights

    1 Products available

  2. Street Lights

    1 Products available

  3. Adapter

    1 Products available
  4. Others Products 4 Products available

Our Products

Leading Manufacturer, Supplier & Retailer of Non Isolated Tube Light Driver, Down Light Driver, Strip Light Driver and Wireless Power Supplies.

AC DC Adaptors

AC DC Adaptors
₹ 500 /Piece Get Latest Price
  • Min. Order (MOQ) 500 Piece(s)
  • Output Voltage 15.0v DC
  • Output Current 1.00 Amp
  • Input Voltage 100v - 240v AC
  • Input Current Greater than 600MA Max at 100v AC rms
  • Input Frequency 47 HZ - 63 HZ
  • Output Load Regulation plus minus 5%
View Complete Details
Ask Latest Price & Details
LED Tube Light

LED Tube Light
  • Input Current <150mA RMS @140VAC.
  • GENERAL SCOPE
  • This Specification defines the performance characteristics of 18W T8 LED tube light. INPUT CHARACTERISTIC:
  • INPUT OPERATING VOLTAGE 140VAC-350VAC.
  • INPUT POWER 18W ± 5%.
  • INPUT FREQUENCY 50Hz to 60Hz.
  • EFFICIENCY >90% at all line conditions.
  • POWER FACTOR >0.95 at all line conditions.
  • THDi. <15% at all line conditions.
  • LUMEN OUTPUT >1800lm.
  • LUMEN EFFICIENCY >100lm/W.
  • CCT 6500K.

 
OUTPUT CHARACTERISTIC:
OUTPUT VOLTAGE 70V ± 2.0VDC.
OUTPUT CURRENT 240mA ± 10mA Constant Current.
LINE & LOAD REGULATION ± 5%.
PROTECTIONS:  
OVER TEMPERATURE PROTECTION The driver is protected against over temperature. when the junction temperature on the driver chip die rises to 150ºC, the driver will shutdown immediately and will remain switched off until the temperature on die falls to 130ºC.
OUTPUT OVERLOAD / SHORT CIRCUIT PROTECTION The driver is protected against over load & short circuit. During over load & Short circuit the driver will go to hick up mode and resumes to normal operation on removal of fault condition.
OUTPUT OVER VOLTAGE PROTECTION In case of output load open the driver output will limit the voltage to safe levels and will work normally when the load is connected back. this will not create any hard failures in the driver.
ENVIRONMENT  
TEMPERATURE Operating Ambient 0ºC to + 50ºC. 
Storage -15ºC to +70ºC ambient.
HUMIDITY Operating 5% RH to 95% RH non - condensing. 
Storage 5% RH to 95% RH non- condensing.
   


View Complete Details
Ask Latest Price & Details
Street Lights

Street Lights
  • Efficiency >85% @ 230VAC.
  • GENERAL SCOPE
  • This Specification defines the performance characteristics of 15W LED Street Light. INPUT CHARACTERISTIC:
  • INPUT OPERATING VOLTAGE 140VAC-300VAC (Withstand Voltage up to 320VAC)
  • INPUT POWER 15W ± 5%.
  • INPUT FREQUENCY 47Hz to 63Hz.
  • INPUT CURRENT <150mA RMS @140VAC.
  • POWER FACTOR >0.90 @ 230VAC.
  • THDi. <20% @ 230VAC.
  • LUMEN OUTPUT >1350 lm.
  • LUMEN EFFICIENCY >90 lm/W.
  • CCT 6000K - 6500K.

OUTPUT CHARACTERISTIC:
OUTPUT VOLTAGE 68V - 75VDC.
OUTPUT CURRENT 180mA ± 30mA Constant Current.
LINE & LOAD REGULATION ± 5%.
PROTECTIONS:  
OVER TEMPERATURE PROTECTION The light is protected against over temperature. when the junction temperature on the driver chip die rises to 150ºC, the output power and thermal dissipation are also reduced. the driver temperature is regulated and the light reliability is improved.
OUTPUT OVERLOAD / SHORT CIRCUIT PROTECTION The light is protected against over load & short circuit. During over load & Short circuit the driver will go to hick up mode and resumes to normal operation on removal of fault condition.
OUTPUT OVER VOLTAGE PROTECTION In case of output load open the driver output will limit the voltage to safe levels and will work normally when the load is connected back. this will not create any hard failures in the driver.
ENVIRONMENT  
TEMPERATURE Operating Ambient 0ºC to + 50ºC. 
Storage -15ºC to +70ºC ambient.
HUMIDITY Operating 5% RH to 95% RH non - condensing. 
Storage 5% RH to 95% RH non- condensing.
   
SURGE PROTECTION: As per Test Standard IEC61000 - 4 - 5.
6KV With stand.
   
DIMENSIONS Length: 350.0mm, Width: 95.00mm, Height: 65.00mm.
   
 




View Complete Details
Ask Latest Price & Details
Non Isolated Tube Light Driver

Non Isolated Tube Light Driver

  • INPUT CHARACTERISTIC INPUT OPERATING VOLTAGE
  • 140VAC-300VAC. INPUT POWER
  • 18W ± 5%. INPUT FREQUENCY
  • 50Hz to 60Hz. INPUT CURRENT
  • < 150mA RMS @140VAC. EFFICIENCY
  • > 90% Under Maximum load @ 230VAC. POWER FACTOR
  • >0.90 at all line conditions. THDi.

OUTPUT CHARACTERISTIC
OUTPUT VOLTAGE 70V ± 2.0VDC.
OUTPUT CURRENT 240mA ± 10mA Constant Current.
LINE & LOAD REGULATION ± 5%.
PROTECTIONS:  
OVER TEMPERATURE PROTECTION Available
OUTPUT OVERLOAD/SHORT CIRCUIT PROTECTION Available
OUTPUT OVER VOLTAGE PROTECTION Available
ENVIRONMENT:  
TEMPERATURE Operating Ambient 0ºC to + 50ºC. 
Storage -15ºC to +70ºC ambient.
HUMIDITY Operating 5% RH to 95% RH non - condensing. 
Storage 5% RH to 95% RH non- condensing.
   
 



View Complete Details
Ask Latest Price & Details
Down Light Driver

Down Light Driver

  • Power Factor > 0.90 at all line conditions.
  • Output Current 300mA ± 20mA Constant Current.
  • Temperature Operating Ambient 0ºC to + 50ºC.  Storage -15ºC to +70ºC ambient.
  • INPUT CHARACTERISTIC:  
  • IINPUT OPERATING VOLTAGE 100VAC-300VAC.
  • INPUT FREQUENCY 47Hz to 63Hz.
  • INPUT CURRENT < 240mA RMS @100VAC.
  • EFFICIENCY > 85% Under Maximum load @ 230VAC.
  • THDi. < 20% at all line conditions.
  • OUTPUT CHARACTERISTIC:  
  • OUTPUT VOLTAGE 40VDC.
  • OUTPUT WATTAGE 12W ± 5%.
  • LINE & LOAD REGULATION ± 5%.
  • PROTECTIONS:  
  • OVER TEMPERATURE PROTECTION Available
  • OUTPUT OVERLOAD/SHORT CIRCUIT PROTECTION Available
  • OUTPUT OVER VOLTAGE PROTECTION Available
  • ENVIRONMENT:  
  • HUMIDITY Operating 5% RH to 95% RH non - condensing.  Storage 5% RH to 95% RH non- condensing.
  • PRODUCT SAFETY:  
  • DI-ELECTRIC VOLTAGE WITHSTAND TEST 3KVAC RMS, 50Hz for one minute (trip current set at 5mA) Between Shorted Input and Output terminals.
  • TERMINATIONS:  
  • AC INPUT Input 2core 100mm length cable
  • DC OUTPUT Output 2core 100mm length cable
  •    
View Complete Details
Ask Latest Price & Details
Strip Light Driver

Strip Light Driver

View Complete Details
Ask Latest Price & Details
Wireless Power Supplies

Wireless Power Supplies
  • Input Voltages: 110 / 220V AC Selectable Switch
  • Input Current: 1.2A rms
  • Input Frequency: 47HZ - 63HZ
  • Output Load Regulation: 13.10V - 13.90VDC
  • Output Voltages: 13.50V

Description

BM100 Series of Power Supplies are the mains operated power supplies used for powering wireless sets of both UHF & VHF. They are the dual output Power supplies. They supply power to wireless set and at the same time charges the battery. These are designed with high frequency switching technology which make them highly reliable, cost effective, compact in size and light in weight.

Salient Features

1. Wider input range, reduced size and weight.

2. Detachable AC Power chord with 3pin IEC 320 inlet socket.

3. Separate battery terminals with charge current limit to enhance battery life.

4. Proven field reliability for more than 14 years.

5. Protected against Short Circuit, Over load and Output over voltage.

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.