Rubber Dispersion Kneader that we provide is designed as per industrial specific requirements. Rubber Dispersion Kneader is manufactured from the high quality components that range from low viscosity adhesive to high viscosity polymers. We can provide Rubber Dispersion Kneader at competitive prices. Applications

• Rubber Compounds & End Products
  • Natural Rubber
  • Synthetic Rubber Mastication of NR, IIR, SBR, CR, EPDM
  • Fluorine Rubber
  • Silicone Rubber
  • Rubber Tires
  • Packing Gaskets
  • Hose
  • Belts
  • Shoe Sole
  • Sponge
  • Electric Wire Covering
  • Casters
  • Golf Balls
  • Oil Seal
  • Weather Strips
  • Water Proof Sheet
  • EVA
  • Thread Compound Battery Containers
• Plastic Compounds & End Products
  • HDPE
  • LDPE
  • PP
  • PVC
  • ABS
  • PS
  • EVA Thermoset plastics compounds & profiles wire covering
  • BMC
• Rubber Dispersion Kneader Can Also Be Used For Several Other Applications In
  • Footwear
  • EVA Rubber & TPR
  • Sports Balls
  • Vibration Insulators
  • Elastic Cord
  • Automobile & Electric Rubber Parts
  • Chemical Industry Compounds
  • Master Batches
  • Phenol, polythene and other thermoplastic resins
  • Tyres & tubes
  • Micro Sheets
  • Silicone Rubber

Salient Features

• Maximum Dispersion
• High Production
• Double blades
• Proper clearance
• High cooling effect gives excellent dispersion which cannot be obtained from an open roll mill
• Its production is 4-5 times more than an ordinary mixing-mill thus saving on labor and electricity

More Features

• No Foundation Required : The kneader has a common bed-plate for all parts and required no foundation
• Easy Cleaning & Color Change : Mixing chamber can be tilted which enables easy cleaning, because of this, different colored compounds can be made without trouble
• Easy Operation : Easy operation with push-buttons and hand lever valves from the operating board
• Short Mixing Time : Mixing time ranging from 6 to 12 minutes depending on compound's specific gravity
• Accident Proof : No chance of an accident as on open roll-mill

Construction

• Mixing Chamber : The mixing chamber is made from alloy steel & is a 'W' shape through which the rotors are assembled. The contact surface of the chamber is stelite welded & wear resistant hard chrome plated. Special steel jacket is provided for cooling & steam for heating. The rotors are coupled with special quality rotary joints to take water or steam.
• Pressure Lid : This is made from alloy steel & is fitted with special pneumatic cylinder to press the material to be mixed. Wider surface area is provided which allow the ingredients being mixed to turn & move in the chamber freely. An arrangement for water or steam circulation is provided & the surface is hard chrome plated.
• Dust Collector : Dust collector is provided to collect spurt powder during mixing & this collected powder can further be used in mixing, hence saving of waste material.
• Electrical Control Board : A powder coated, dust proof electrical panel box is provided fitted with voltmeter, ampere meter, temperature indicators cum controller, contactors, timer, buzzer, emergency button, interlocking provision, on/off switches for motors, hand operated valves, overload relay, etc.
• Bed Plate : TheThe machine has common bed on which all components are arranged in proper manner by which there is no need of foundation. (Not requirement of foundation bolts only floor level SOLID RCC).

We offer excellent quality Tread Rubber Press that is also called as Precured Tread Rubber Press. Tread Rubber Press that we offer is available in standard size. We provide Tread Rubber Press with four daylight fully automatic with die injection facilities. Tread Rubber Press that we offer is made in conformity with high industrial standards. Size Available : 12"144"

We are counted among distinguished suppliers of Rubber Extruder catering to buyers across diverse markets. Based in Bahadurgarh(India), our company is actively involved in furnishing varied demands of the buyers.

Rubber Dispersion Kneader that we provide is designed as per industrial specific requirements. Rubber Dispersion Kneader is manufactured from the high quality components that range from low viscosity adhesive to high viscosity polymers. We can provide Rubber Dispersion Kneader at competitive prices. Applications

• Rubber Compounds & End Products
  • Natural Rubber
  • Synthetic Rubber Mastication of NR, IIR, SBR, CR, EPDM
  • Fluorine Rubber
  • Silicone Rubber
  • Rubber Tires
  • Packing Gaskets
  • Hose
  • Belts
  • Shoe Sole
  • Sponge
  • Electric Wire Covering
  • Casters
  • Golf Balls
  • Oil Seal
  • Weather Strips
  • Water Proof Sheet
  • EVA
  • Thread Compound Battery Containers
• Plastic Compounds & End Products
  • HDPE
  • LDPE
  • PP
  • PVC
  • ABS
  • PS
  • EVA Thermoset plastics compounds & profiles wire covering
  • BMC
• Rubber Dispersion Kneader Can Also Be Used For Several Other Applications In
  • Footwear
  • EVA Rubber & TPR
  • Sports Balls
  • Vibration Insulators
  • Elastic Cord
  • Automobile & Electric Rubber Parts
  • Chemical Industry Compounds
  • Master Batches
  • Phenol, polythene and other thermoplastic resins
  • Tyres & tubes
  • Micro Sheets
  • Silicone Rubber

Salient Features

• Maximum Dispersion
• High Production
• Double blades
• Proper clearance
• High cooling effect gives excellent dispersion which cannot be obtained from an open roll mill
• Its production is 4-5 times more than an ordinary mixing-mill thus saving on labor and electricity

More Features

• No Foundation Required : The kneader has a common bed-plate for all parts and required no foundation
• Easy Cleaning & Color Change : Mixing chamber can be tilted which enables easy cleaning, because of this, different colored compounds can be made without trouble
• Easy Operation : Easy operation with push-buttons and hand lever valves from the operating board
• Short Mixing Time : Mixing time ranging from 6 to 12 minutes depending on compound's specific gravity
• Accident Proof : No chance of an accident as on open roll-mill

Construction

• Mixing Chamber : The mixing chamber is made from alloy steel & is a 'W' shape through which the rotors are assembled. The contact surface of the chamber is stelite welded & wear resistant hard chrome plated. Special steel jacket is provided for cooling & steam for heating. The rotors are coupled with special quality rotary joints to take water or steam.
• Pressure Lid : This is made from alloy steel & is fitted with special pneumatic cylinder to press the material to be mixed. Wider surface area is provided which allow the ingredients being mixed to turn & move in the chamber freely. An arrangement for water or steam circulation is provided & the surface is hard chrome plated.
• Dust Collector : Dust collector is provided to collect spurt powder during mixing & this collected powder can further be used in mixing, hence saving of waste material.
• Electrical Control Board : A powder coated, dust proof electrical panel box is provided fitted with voltmeter, ampere meter, temperature indicators cum controller, contactors, timer, buzzer, emergency button, interlocking provision, on/off switches for motors, hand operated valves, overload relay, etc.
• Bed Plate : TheThe machine has common bed on which all components are arranged in proper manner by which there is no need of foundation. (Not requirement of foundation bolts only floor level SOLID RCC).

We offer excellent quality Tread Rubber Press that is also called as Precured Tread Rubber Press. Tread Rubber Press that we offer is available in standard size. We provide Tread Rubber Press with four daylight fully automatic with die injection facilities. Tread Rubber Press that we offer is made in conformity with high industrial standards. Size Available : 12"144"

We are counted among distinguished suppliers of Rubber Extruder catering to buyers across diverse markets. Based in Bahadurgarh(India), our company is actively involved in furnishing varied demands of the buyers.