Our Products
Industrial Mountings
1 Products availableCompression Springs & Air Springs
1 Products availableOur Complete range of products are Avmounts Cushy Foot Mountings and Machine Mount Levelling WEDGE.
Avmounts Sandwich type vibration Isolators are of simple design and easy to fit. Designed with different physical dimensional specifications and rubber characteristics to suit a very wide range of application. Rubber to metal bonding permits the mounting to be used either in compression shear, or a combination of both.
Mount Type | Static Load | Static Deflection | Colour Code |
Kgs | in MM | ||
AS - A0 | 440 | 4 | GREEN |
AS - A1 | 300 | 4 | RED |
AS - A2 | 200 | 4 | GREY |
AS - A3 | 140 | 4 | BLUE |
AS - A4 | 100 | 4 | SILVER |
AVC Cup Type Shock Mounts are specifically designed for the protection of equipment from high impact shocks, medium to high frequency vibrations and these therefore serve as a barrier against structure-borne noises. The latter is particularly useful for communication, radar, electronic and other sensitive equipment installed in vehicles, ships, aircraft and other mobile installations.
The movement of a vehicle over rough terrain or tracks on land, through inclement weather at sea or past gunfire or other explosions on land, sea or air, results in high impact, high frequency shocks being generated. Shocks are also the result because of careless or accidental handling of equipment during transit. AVC Cup Type Shock Mounts are useful in all such cases.
Our mounts in addition, provide vibration isolation from 40 cps upwards although this is dependent on the system resonant frequency.
AVC Cup Type Shock Mounts are compact in design and its mild steel components are so designed and assembled as to be self-captivating, that even if the rubber component is destroyed, the equipment still remains firmly attached to the supporting structure. The use of rubber in compression lends the characteristics of increased stiffness with deflection, thereby ensuring good shock protection without sudden bottoming. The characteristic of equal stiffness in all directions provides shock and vibration protection in all directions, whilst also allowing the isolators to be so installed that they are loaded either radially or axially, upright or inverted.
Applications of Mountings (Type AVC)
AVC-1000 Series - Maximum Load Range in Kgs. | ||
Type | Mobile | Static |
Number | Application | Application |
AVC 1005 | 3Kg - 5Kg | 10Kg |
AVC 1010 | 5Kg - 10Kg | 20Kg |
AVC 1015 | 10Kg - 15Kg | 30Kg |
AVC 1020 | 15Kg - 20Kg | 40Kg |
AVC 1025 | 20Kg - 25Kg | 50Kg |
AVC-2000 Series - Maximum Load Range in Kgs. | ||
Type | Mobile | Static |
Number | Application | Application |
AVC 2010 | 7Kg - 10Kg | 30Kg |
AVC 2015 | 8Kg - 15Kg | 35Kg |
AVC 2025 | 15Kg - 25Kg | 60Kg |
AVC 2035 | 25Kg - 35Kg | 80Kg |
AVC 2050 | 35Kg - 50Kg | 125Kg |
AVC 2070 | 50Kg - 70Kg | 150Kg |
We manufacture Avmount Cushy Foot Mountings that find wide uses in diesel engines, combustion engines, air conditioning units, etc. Our range includes the ACF/A series and the ACF/B series.
Avmount Cushy Foot Mountings are designed such that when any equipment is placed on them, the rubber-to-metal bonded rectangular inserts are loaded in compression and shear-a combination which lends longevity with the best load/deflection characteristics. These cannot become 'solid' and thus rendered ineffective-a failure from which many so-called anti-vibration devices. Our mountings are so designed that the rubber is protected from oil and physical damage by the use of robust castings. They also provide three planes of stiffness-vertical transverse and longitudinal, thereby allowing them to be employed for optimum performance and use. Full advantage can be taken of this characteristic by disposing the mountings so that greater flexibility is available in the direction in which it is needed.
The mountings are made to suit a very wide range of loads from 50 kg to 1500 kg. This is possible by designing the rubber compound suitably. Avmount Cushy Foot Mountings are employed with friction locating pads to eliminate the need for grouting, thus making the mounts easy to fit resulting in a neat installation. Additionally, shifting of the location of the instrumentation or machinery is possible with minimum of effort.
Applications of Cushy Foot Mountings
/ |
ACF/A- Series | ACF/C- Series | ACF/B- Series |
A | 122 | 160 | 225 |
B | 132 | 180 | 205 |
H | 82 | 105 | 112 |
ød | 10 | 10 | 16 |
L | 112 | 135 | 205 |
C | 90 | 100 | 170 |
W | 84 | 100 | 140 |
Bolt Size | M12/M16 | M12/M16 | M16/M20 |
Series Ref. | Load Kg | Deflection Mm | Ref | |
"A" Series | 75 | 5.1 | A4 | |
110 | 5.5 | A3 | ||
150 | 6.0 | A2 | ||
230 | 5.6 | A1 | ||
310 | 5.2 | A0 |
Series Ref. | Load Kg | Deflection Mm | Ref | |
"B" Series | 260 | 6.0 | B4 | |
550 | 6.0 | B3 | ||
840 | 6.0 | B2 | ||
1050 | 5.8 | B1 | ||
1550 | 5.4 | B0 |
Series Ref. | Load Kg | Deflection Mm | Ref | |
"C" Series | 200 | 3.4 | C4 | |
350 | 3.4 | C3 | ||
450 | 3.5 | C2 | ||
700 | 3.5 | C1 | ||
950 | 3.2 | C0 |
Advantages for Installation of Machinery on Mounts:
Applications:
Installation Procedure:
Lift up the machine from the floor.
Keep the mount below the machine such that the mount should be exactly under the machine base.
Level the machine using a precision spirit level.
Loosen the side levelling bolt to lower and adjust the height of the mount to obtain precise levelling, Max. up to 3mm.
Tighten lock nuts to arrest levelling.