Our Products
Commercial and industrial Hot Water Heat Pumps are designed to offer hot water for commercial and (or) industrial application. In order to achieve the required water temperature, large heat pump units apply unique V style evaporator design, which enlarges the heat exchange surface and increases efficiency
Features and Highlights
Technical specification
Model | ACHW – 005C | ACHW – 010 C | ACHW – 012 C | ACHW – 015 C |
---|---|---|---|---|
HP | 5 | 10 | 12 | 15 |
Power supply-v/Hz/ph | 380-415/50/3 | 380-415/50/3 | 380-415/50/3 | 380-415/50/3 |
Heating capacity-kw/hr | 19 | 37.5 | 45 | 55 |
Power consumption -kw/hr | 3.9 | 7.8 | 9.45 | 11.88 |
COP | 4.87 | 4.81 | 4.78 | 4.63 |
Current- Amps | 7.0 | 13.9 | 16.9 | 21.2 |
Hot water production – ltr/hr | 408 | 806 | 967 | 1182 |
Noise level DB(A) | 62 | 63 | 63 | 66 |
Inlet temp. – Deg.c | 15 | 15 | 15 | 15 |
Outlet temp.- Deg.c | 55 | 55 | 55 | 55 |
compressor | Scroll | Scroll | Scroll | Scroll |
Water flow rate-l/hr | 3267 | 6449 | 7739 | 9458 |
Water connection- inlet / outlet | 1-1/4’’ | 1-1/4’’ | 1-1/4’’ | 1-1/2’’ |
Model | ACHW – 020C | ACHW – 025 C | ACHW – 030 C | ACHW – 040 C |
---|---|---|---|---|
HP | 20 | 25 | 30 | 40 |
Power consumption -kw/hr | 380-415/50/3 | 380-415/50/3 | 380-415/50/3 | 380-415/50/3 |
Heating capacity-kw/hr | 15.92 | 19.23 | 23.76 | 31.91 |
COP | 4.71 | 4.68 | 4.63 | 4.70 |
Current- Amps | 28.5 | 34.4 | 42.5 | 57 |
Hot water production – ltr/hr | 1612 | 1935 | 2365 | 3224 |
Noise level DB(A) | 68 | 68 | 68 | 68 |
Inlet temp. – Deg.c | 15 | 15 | 15 | 15 |
Outlet temp.- Deg.c | 55 | 55 | 55 | 55 |
compressor | Scroll | Scroll | Scroll | Scroll |
Water flow rate-l/hr | 12898 | 15477 | 18917 | 25795 |
Water connection- inlet / outlet | 1-1/2’’ | 3’’ | 3’’ | 3’’ |
High working pressure :
The copper pipe is of 0.8- 1.2 mm thickness, no welding inside with its extra ordinary pressure resistance property. The copper pipe is without any leakage under 5kg/sq.cm pressure test.
Air source Heat pump is a device which extracts heat from air and transfer heat to the water. Main components of heat pump are
Function:
Fan draws out side ambient air in to the heat pump and pass through the evaporator coil. In the evaporator coil, the refrigerant can turn liquid to gas at very low temperature. This gas compressed by compressor to elevate the temperature and pressure. Condenser is nothing but tube in tube or tube in shell heat exchanger is made of copper pipe with no welding inside. The internal spiral surface of copper tube ensure effectiveness of heat exchanger. Provision is made for gas as well as water connection.
Heated gas pass through one tube while water passes through the shell. Water gets instantly heated from 15 deg.c to 55 deg.c. Refrigerant gas is condensed and goes to liquid from the same pressure as discharged by compressor. In expansion valve, causes sudden pressure drop in refrigerant, in turn refrigerant temperature drop to temperature below the ambient
Domestic Heat pump circulating model adopts high efficiency tube in shell water heat exchanger and incorporate a built in German Willo pump and for every installation. The unit is capable of producing hot water with a maximum temperature up to 55 deg.c It can retrofit to existing solar water heater tank or electrical geyser to replace electric water heater. save more than 2/3 energy.
Features and High lights of Heat pump (Circulating Model)
Model | ADHW – 3.5C | ADHW – 7 C | ADHW-10C |
---|---|---|---|
Power supply-v/Hz/ph | 220-240/50/1 | 220-240/50/1 | 220-240/50/1 |
Heating capacity-kw/hr | 3.5 | 7.2 | 9.8 |
Power consumption -kw/hr | 0.74 | 1.05 | 1.48 |
COP | 4.75 | 4.85 | 4.91 |
Current- Amps | 3.3 | 6.7 | 9.1 |
Hot water production – ltr/hr | 75 | 155 | 211 |
Suggested tank capacity- ltrs | 100-300 | 200-500 | 300-600 |
Inlet temp. – Deg.c | 15 | 15 | 15 |
Outlet temp.- Deg.c | 55 | 55 | 55 |
compressor | Rotary | Rotary | Rotary |
Circulating pump flow rate-cu.m/hr | 0.6 | 1.3 | 1.7 |
Water connection- inlet / outlet | ¾’’ | ¾’’ | ¾’’ |
Technical specification
Model | ADHW – 14C | ADHW – 18 C |
---|---|---|
Power supply-v/Hz/ph | 220-240/50/1 | 380-415/50/3 |
Heating capacity-kw/hr | 14 | 7.2 |
Power consumption -kw/hr | 2.97 | 3.83 |
COP | 4.72 | 4.70 |
Current- Amps | 13.5 | 6.8 |
Hot water production – ltr/hr | 301 | 387 |
Suggested tank capacity- ltrs | 400-800 | 500-1000 |
Inlet temp. – Deg.c | 15 | 15 |
Outlet temp.- Deg.c | 55 | 55 |
compressor | Rotary | Scroll |
Circulating pump flow rate-cu.m/hr | 2.4 | 3.1 |
Water connection- inlet / outlet | ¾’’ | 1-1/4’’ |