GST : 07AAUCA4793K1ZV
Verified
Write a Review
Our Products
Plastic Granules
1 Products availableWe offer a complete product range of Unfilled White PP Copolymer (CPM2100), White PP Homopolymer (PPM 5500), Natural PP Homopolymer (PPN 0300), High Melt Flow Black PP Copolymer(PPB 4400) and Unfilled Black PP Copolymer (CPB2100)
CPM2100 is white granules recommended for use in Injection Molding processes where high impact strength is required and ideal material to use in manufacturing of air coolers, household items, furniture and electronic items.
Storage RecommendationsBags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight
PackagingStandard polymer bag with size of 25 Kgs each.
Typical Specification
| Properties | Test Method | Unit | Typical Values |
|---|---|---|---|
| Melt Flow Rate (230°C/2.16 kg) | ASTM D1238 | Gms/10min | 12 – 15 |
| Tensile Strength at Yield (50mm/min) | ASTM D638 | Kgs/cm² | 210-260 |
| Elongation at Yield (50mm/min) | ASTM D638 | % | 10 – 15 |
| Flexural Modulus | ASTM D790 | Kgs/cm² | 10000-12000 |
| Notched Izod Impact Strength(23°C) | ASTM D256 | Kgs.cm/cm | 9 – 12 |
| Ash Content (650°C) | ASTM D-5630 | % | Less than 2 |
PPM5500 is white granules recommended for use in Injection Molding processes. It is an ideal choice for moulding rigid containers, thermo-wares, furniture, housewares and automotive components. It is also suitable as a compounding base and blending material in furniture compound.
Storage RecommendationsBags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight
PackagingStandard polymer bag with size of 25 Kgs each.
Typical Specification
| Properties | Test Method | Unit | Typical Values |
|---|---|---|---|
| Melt Flow Rate (230°C/2.16 kg) | ASTM D1238 | Gms/10min | 9 – 10 |
| Tensile Strength at Yield (50mm/min) | ASTM D638 | Kgs/cm² | 210-240 |
| Elongation at Yield (50mm/min) | ASTM D638 | % | 5 – 15 |
| Flexural Modulus | ASTM D790 | Kgs/cm² | 15000-16000 |
| Notched Izod Impact Strength(23°C) | ASTM D256 | Kgs.cm/cm | 5 – 6 |
| Ash Content (650°C) | ASTM D-5630 | % | Less than 5 |
PPN0300 is natural granules recommended for use in Injection Molding processes. It is an ideal choice for moulding rigid containers, thermo-wares, furniture, housewares and automotive components. It is also suitable as a compounding base and blending material in furniture compound.
Storage RecommendationsBags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight
PackagingStandard polymer bag with size of 25 Kgs each.
Typical Specification
| Properties | Test Method | Unit | Typical Values |
|---|---|---|---|
| Melt Flow Rate (230°C/2.16 kg) | ASTM D1238 | Gms/10min | 10 – 15 |
| Tensile Strength at Yield (50mm/min) | ASTM D638 | Kgs/cm² | 270-310 |
| Elongation at Yield (50mm/min) | ASTM D638 | % | 10 – 15 |
| Flexural Modulus | ASTM D790 | Kgs/cm² | 16000-17000 |
| Notched Izod Impact Strength(23°C) | ASTM D256 | Kgs.cm/cm | 3 – 5 |
| Ash Content (650°C) | ASTM D-5630 | % | N/A |
PPB4400 is a black granules recommended for use in Injection Molding processes where high melt flow polymers are required. It is an ideal material to use in manufacturing of automotive components and industrial polymer compounds.
Storage RecommendationsBags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight
PackagingStandard polymer bag with size of 25 Kgs each.
Typical Specification
| Properties | Test Method | Unit | Typical Values |
|---|---|---|---|
| Melt Flow Rate (230°C/2.16 kg) | ASTM D1238 | Gms/10min | 35-45 |
| Tensile Strength at Yield (50mm/min) | ASTM D638 | Kgs/cm² | 210-250 |
| Elongation at Yield (50mm/min) | ASTM D638 | % | 10 – 15 |
| Flexural Modulus | ASTM D790 | Kgs/cm² | 13000-15000 |
| Notched Izod Impact Strength(23°C) | ASTM D256 | Kgs.cm/cm | 5 – 6 |
| Ash Content (650°C) | ASTM D-5630 | % | 4 – 5 |
CPB2100 is black granules recommended for use in Injection Molding processes where high impact strength is required and ideal material to use in manufacturing of air coolers, household items, furniture and electronic items.
Storage Recommendations
Bags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight
Packaging
Standard polymer bag with size of 25 Kgs each.
Mr. Puneet Bansal & Rajesh Gupta (Avdha Plast Alloys Private Limited)
H-270, Sector-2, Industrial Area, DSIIDC, Bawana, Delhi - 110039
Share us via
View Contact Number 
