High intensity xenon obstruction lights are used mainly during night marking. The xenon lights are credibly known for their gift to infiltrate poor visibility and foggy conditions. It provides an output in multiples of an equivalent neon light filament. A high intensity white strobe light (FAA) is used on structures that are greater than 150 meters. Unlike a medium intensity xenon light, a high intensity one doesn't provide 360 coverage, which requires the use of at least 3 high strobes at each level. The common high white strobe flashes 40-60 times in a minute, at an intensity of 200, 000 candelas for daytime, 20, 000 candelas at twilight, and 2, 000 candelas at night-time. The operation of our xenon lights will not be affected even in temperatures ranging from -20C to +55C. They will withstand wind-speeds of 240 kph, blown from any direction, along with rain and fog.

• Compliant to ICAO, Annexure-14, Chapter-6, Type A High Intensity Light.
• Compliant to FAA type L-856.
• Comprises of
• Flash Head Assembly.
• Flash head control unit.
• Master controller.
• Uni-directional white flashing light designed to provide 120 horizontal with narrow vertical beam pattern.
• Beam angle adjustment in vertical plane available.
• Automatic selection of Day / Twilight / Night mode light intensity adjustment.
• All enclosures made in stainless steel grade 304.
• Integral adjustable tilt angle mounting bracket for flash head assembly.
• Flash synchronization upto 24 Flash heads available for one single structure.
• Remote fault monitoring of individual light available.
• Intelligent lamp control technology for maximum lamp life.
• Toughened glass window with internal parabolic reflector and light direction baffles for flash head assembly.
• IP-65 degree of Ingress protection.
• Draw out type panels for ease of maintenance.
• Built in Surge Protection

• Flash Head FTH-HI
• Flash Head Control Unit TCU-HI
• Master Controller TMC-HI
• Photocell Head TPC-HI

Medium intensity xenon lights are used mainly during night marking. The xenon lights are credibly known for their gift to infiltrate poor visibility and foggy conditions. It provides an output in multiples of an equivalent neon light filament. Medium Intensity xenon white obstruction lights are usually used on structures that are above 150 meters. The common medium white strobe flashes 20-60 times in a minute, at an intensity of 20, 000 candelas for daytime/twilight, and 2, 000 candelas at nighttime. Avaids Xenon lights can be operated through a reliable Switch Mode Power Supply, with in-built photo-sensing device. These are omni-directional aviation warning lights, which conform to ICAO Annexure-14, chapter 6 under Medium Intensity type 'B'. Flashers are operated through a reliable Switch Mode Power Supply(SMPS), with a dedicated photo sensing device for dusk to dawn operation. We make the Flash head housing of our products in cast aluminium alloy, which is then painted with polyurethane coating for all weather protection and resistance from humidity. UV resistant acrylic is used in the manufacturing of its fresnel lens for fine quality. And all other hardware is made of high grade stainless steel. They have the unique characteristic of not creating any electromagnetic or radio frequency interference. White strobes are preferred since they reduce maintenance cost (i.e. no maintenance of painting) and there are no background lights that would blend with the xenons white strobes. It is common to find structures with white xenon flashers during the daytime, and red lights at night. White strobes (that flash 24/7) may also be used in urban areas. The operation of our xenon lights will not be affected even in temperatures ranging from -20C to +55C. They will withstand wind-speeds of 240 kph, blown from any direction, along with rain and fog.

The rapid growth of the cellular phone industry and other communication services will lead up to millions of new communication towers all over the Globe. These towers present hazards to flight paths of aircrafts, so these towers should be marked with obstruction lights to make sky safer to fly. Technovators Tower Marking Low Intensity Obstruction Lights are compact, sturdy, power saving LED low intensity lights, available with optional advanced features,

The Neon spiral lamp is operated through electronic power supply which is housed inside the metallic enclosure of the light. Specially designed copper R.F. Screen is provided to shield the lamp against emission of R.F. Two lamps can be individually connected through the failure sensing changeover card located in the control cabinet. The changeover of power from service lamp to standby lamp takes place automatically, in the event of failure of service lamp.

• ICAO (Type A & B) compliant product design and performace
• All hardware of Tower marker obstruction lights are made of corrosion resistant metals.
• Omni directional REDNeon light source (10 cd - 32 cd)) hence no requirement of filters that fade quickly
• Customizable for both AC and DC conditions
• High quality optics for excellent beam spread control.
• Light weight sturdy casings (of high quality die-cast aluminum)
• Excellent dust and moisture sealing through improved gaskets
• Borosilicate glass dome.
• Aluminum Alloy housing.
• Wide operating temperature range (-20 C to +40 C)

AVAIDS TECHNOVATORS, is a leading organization in the manufacturing of ICAO obstruction lights for high rise structures and Tower Marker Lights. We are an ISO 9001:2000 certified company. We specialize in manufacturing of low intensity LED obstuction lights. Our products are designed according to the specifications laid down by the ICAO. The ICAO has made regulations for the installation of warning lights at High rise structures as per their height and width. These obstruction lights are vital for safe air travel and aviation, and protection of precious human life and property. According to the specifications of ICAO, low intensity obstruction lights are required to be fitted at obstacles where the obstacle is a less extensive one and its height above the surrounding ground is less than 45 meters. Avaids Low Intensity Aviation Lights not only meet these specifications but also provide the benefits of LED lighting technology - low initial as well as operating cost and long life.Our low intensity obstruction lights are created using cutting-edge technology, which makes our products no longer dependent on complex, heavy, expensive incandescent bulbs and fluorescent lights. Our LED low intensity lights guarantees more value for money. Most importantly, they are maintenance free. Also to suit your needs and specifications, they can be custom-made.

Advantages

• Omni directional RED light source (10 cd - 32 cd) with no filters to fade away quickly.
• Customizable for both AC and DC conditions.
• Multiple light elements in the source reduce the chances of a complete blackout which could be caused in case of a single source failure.
• High quality optics for excellent beam spread control.
• All hardware of Tower marker obstruction lights are made of corrosion resistant metals.
• Excellent dust and moisture sealing as a result of improved gaskets.
• Bird spikes for protection against droppings.
• Use of quality components and sophisticated technology reduce chances of maintenance and replacement.
• Low power consumption, which leads to huge savings on electricity bills.
• SMPS redundant parallel power supply ensures improved product life.
• Superior quality. We at Avaids follow all quality checking procedures during different stage of production. ICAO (Type A & B) compliant product design and performance.

High intensity xenon obstruction lights are used mainly during night marking. The xenon lights are credibly known for their gift to infiltrate poor visibility and foggy conditions. It provides an output in multiples of an equivalent neon light filament. A high intensity white strobe light (FAA) is used on structures that are greater than 150 meters. Unlike a medium intensity xenon light, a high intensity one doesn't provide 360 coverage, which requires the use of at least 3 high strobes at each level. The common high white strobe flashes 40-60 times in a minute, at an intensity of 200, 000 candelas for daytime, 20, 000 candelas at twilight, and 2, 000 candelas at night-time. The operation of our xenon lights will not be affected even in temperatures ranging from -20C to +55C. They will withstand wind-speeds of 240 kph, blown from any direction, along with rain and fog.

• Compliant to ICAO, Annexure-14, Chapter-6, Type A High Intensity Light.
• Compliant to FAA type L-856.
• Comprises of
• Flash Head Assembly.
• Flash head control unit.
• Master controller.
• Uni-directional white flashing light designed to provide 120 horizontal with narrow vertical beam pattern.
• Beam angle adjustment in vertical plane available.
• Automatic selection of Day / Twilight / Night mode light intensity adjustment.
• All enclosures made in stainless steel grade 304.
• Integral adjustable tilt angle mounting bracket for flash head assembly.
• Flash synchronization upto 24 Flash heads available for one single structure.
• Remote fault monitoring of individual light available.
• Intelligent lamp control technology for maximum lamp life.
• Toughened glass window with internal parabolic reflector and light direction baffles for flash head assembly.
• IP-65 degree of Ingress protection.
• Draw out type panels for ease of maintenance.
• Built in Surge Protection

• Flash Head FTH-HI
• Flash Head Control Unit TCU-HI
• Master Controller TMC-HI
• Photocell Head TPC-HI

Medium intensity xenon lights are used mainly during night marking. The xenon lights are credibly known for their gift to infiltrate poor visibility and foggy conditions. It provides an output in multiples of an equivalent neon light filament. Medium Intensity xenon white obstruction lights are usually used on structures that are above 150 meters. The common medium white strobe flashes 20-60 times in a minute, at an intensity of 20, 000 candelas for daytime/twilight, and 2, 000 candelas at nighttime. Avaids Xenon lights can be operated through a reliable Switch Mode Power Supply, with in-built photo-sensing device. These are omni-directional aviation warning lights, which conform to ICAO Annexure-14, chapter 6 under Medium Intensity type 'B'. Flashers are operated through a reliable Switch Mode Power Supply(SMPS), with a dedicated photo sensing device for dusk to dawn operation. We make the Flash head housing of our products in cast aluminium alloy, which is then painted with polyurethane coating for all weather protection and resistance from humidity. UV resistant acrylic is used in the manufacturing of its fresnel lens for fine quality. And all other hardware is made of high grade stainless steel. They have the unique characteristic of not creating any electromagnetic or radio frequency interference. White strobes are preferred since they reduce maintenance cost (i.e. no maintenance of painting) and there are no background lights that would blend with the xenons white strobes. It is common to find structures with white xenon flashers during the daytime, and red lights at night. White strobes (that flash 24/7) may also be used in urban areas. The operation of our xenon lights will not be affected even in temperatures ranging from -20C to +55C. They will withstand wind-speeds of 240 kph, blown from any direction, along with rain and fog.

The rapid growth of the cellular phone industry and other communication services will lead up to millions of new communication towers all over the Globe. These towers present hazards to flight paths of aircrafts, so these towers should be marked with obstruction lights to make sky safer to fly. Technovators Tower Marking Low Intensity Obstruction Lights are compact, sturdy, power saving LED low intensity lights, available with optional advanced features,

The Neon spiral lamp is operated through electronic power supply which is housed inside the metallic enclosure of the light. Specially designed copper R.F. Screen is provided to shield the lamp against emission of R.F. Two lamps can be individually connected through the failure sensing changeover card located in the control cabinet. The changeover of power from service lamp to standby lamp takes place automatically, in the event of failure of service lamp.

• ICAO (Type A & B) compliant product design and performace
• All hardware of Tower marker obstruction lights are made of corrosion resistant metals.
• Omni directional REDNeon light source (10 cd - 32 cd)) hence no requirement of filters that fade quickly
• Customizable for both AC and DC conditions
• High quality optics for excellent beam spread control.
• Light weight sturdy casings (of high quality die-cast aluminum)
• Excellent dust and moisture sealing through improved gaskets
• Borosilicate glass dome.
• Aluminum Alloy housing.
• Wide operating temperature range (-20 C to +40 C)

AVAIDS TECHNOVATORS, is a leading organization in the manufacturing of ICAO obstruction lights for high rise structures and Tower Marker Lights. We are an ISO 9001:2000 certified company. We specialize in manufacturing of low intensity LED obstuction lights. Our products are designed according to the specifications laid down by the ICAO. The ICAO has made regulations for the installation of warning lights at High rise structures as per their height and width. These obstruction lights are vital for safe air travel and aviation, and protection of precious human life and property. According to the specifications of ICAO, low intensity obstruction lights are required to be fitted at obstacles where the obstacle is a less extensive one and its height above the surrounding ground is less than 45 meters. Avaids Low Intensity Aviation Lights not only meet these specifications but also provide the benefits of LED lighting technology - low initial as well as operating cost and long life.Our low intensity obstruction lights are created using cutting-edge technology, which makes our products no longer dependent on complex, heavy, expensive incandescent bulbs and fluorescent lights. Our LED low intensity lights guarantees more value for money. Most importantly, they are maintenance free. Also to suit your needs and specifications, they can be custom-made.

Advantages

• Omni directional RED light source (10 cd - 32 cd) with no filters to fade away quickly.
• Customizable for both AC and DC conditions.
• Multiple light elements in the source reduce the chances of a complete blackout which could be caused in case of a single source failure.
• High quality optics for excellent beam spread control.
• All hardware of Tower marker obstruction lights are made of corrosion resistant metals.
• Excellent dust and moisture sealing as a result of improved gaskets.
• Bird spikes for protection against droppings.
• Use of quality components and sophisticated technology reduce chances of maintenance and replacement.
• Low power consumption, which leads to huge savings on electricity bills.
• SMPS redundant parallel power supply ensures improved product life.
• Superior quality. We at Avaids follow all quality checking procedures during different stage of production. ICAO (Type A & B) compliant product design and performance.