Our Products
Aircraft Engines & Components
2 Products availableSolar Lightings
2 Products availableDecorative Lights, Lamps & Lamp Shades
2 Products availableHigh Mast Lighting
1 Products availableGymnastics, Sports Equipment & Goods
1 Products availableThe market leaders in manufacturing obstruction warning instruments in aviation industry, Avaids Technovators, brings a highly visible mechanical warning system (Aerial marker balls) for marking transmission lines and ropeways along the flight path during the day. These are spherical markers, which are compliant with International Civil Aviation Organization (ICAO) recommendations annex 14 chapter 6. These aerial marker balls displayed on an overhead wire, cable etc. should not have a diameter less than 600mm. They should be of a single solid color. When installed, white and red, or white and orange markers should be displayed alternately. The color selected should contrast with the background against which it will be seen. The aircraft warning spheres are made up of finest quality FRP and polished from both inside and outside.Ultraviolet resistant pigment is infused with the FRP matrix to fasten the life of the colour.The resin combinations are used in a manner to achieve the high strength to weight ratio to achieve a negligible weight of the sphere. Our warning spheres are composed of two hemispheres with aluminum alloy clamps.These clamps designed depending on the clients earth wire dimensions.All other hardware is made from stainless steel and provided with spring washers and lock nut which prevent the sphere from slipping. We also provide an easy-to-install guide along with the instrument. Drainage systems are provided in each of the hemisphere, which is necessary to prevent water accumulation inside the sphere.
The warning spheres are available in the following colour combinations as per requirements of various aviation regulations world wide.
Night Mode | Weight | Dia.(mm) | Drain Holes | Armour Rod | Material of Clamp | Material of Sphere |
ADMS 600 | 5.0 Kg Approx | 600 | Provided | Optional | Aluminum Alloy/ Galvanized Mild Steel | Fibre Reinforced Polyester |
ADMS 600 | 5.0 Kg Approx | 600 | Provided | Optional | Aluminum Alloy/ Galvanized Mild Steel | Aluminum |
Color of Sphere | Standard Application |
White/Red/ Orange | White/Red/ Orange |
White/Red/ Orange | White/Red/ Orange |
Avaids Technovatorss solar powered obstruction lights are used for multiple purposes. These lights can be used for high rise buildings, chimneys, transmission lines, telecommunication towers etc. They are very compact, easy-to-use and maintenance-free products. Our lights experience negligible wear and tear. More than 2000 solar powered aviation warning lights of Technovators are installed all around the globe. These lights are long lasting, low on maintenance and are ideal for standalone deployment on transmission pylons. They are an ideal solution for passive shelters where the electricity connection is difficult to get. It also helps in saving the expensive resources and optimally using natural resources. This unique arrangement helps save cable cost. Special detailing is given on the manufacturing of these systems to keep the maintenance costs low. They are designed specially to withstand any extreme environment without hampering its performance. Avaids battery powered obstruction lights are reliable self-contained air traffic warning light systems. The battery, charges and panel are on a same platform that can be mounted on top of the tower. Due to such an arrangement, there is no need for external wiring. Also, since all these components are mounted on top of the tower, it improves the safety of equipment (as opposed to having battery box at the base of the tower). Technovators solar powered systems have an in-built dedicated software, which helps in the optimal use of solar modules and battery. Solid state lamps are used to minimize lighting load. Dusk to dawn operation of obstruction warning light is controlled by photo-sensing. This type of arrangement can be customized to meet individual client requirements. The solar-powered obstruction light's main advantages are low energy consumption, bright light, a solar array and a battery bank. During the day, the solar array charges the battery via the controller and in the night, this system controller automatically activates the obstruction light and draws power from the battery. It can operate efficiently in varying temperatures from -25C -> +55C.
Technical Specifications of Aircraft Obstruction Warning Lights
Type | Mono/Poly Crystalline |
Maximum Power | > 10 TO 120 Watt |
Efficiency | 90 % |
Type | Sealed Maintenance Free |
Nominal Voltage | > 12 /24 V |
Capacity | Depending upon Load & Design Autonomy |
Shipping Specifications
Shipping details for solar powered obstruction lights
Carton No. | Carton Description | Net Weight (KG) | Gross Weight (KG) | Dimn. | Vol. CBM |
1 | TASS-LI-INTG | 3 | 5 | 170 x 160 x 330 | 0.0089 |
2 | Solar Module | 30 | 56 | 1370 x 550 x 785 | 0.059 |
3 | Battery with Battery Box | 40 | 50 | 700 x 500 x 600 | 0.21 |
4 | Mounting | 68 | 88 | 1485 x 400 x 320 | 0.019 |
5 | Cable | Depends upon site location |
The major advantage of having a twin LED aviation warning light is that when the lowermost lights fail, the lighting switches onto its standby lighting system. This eliminates the eventuality of a complete blackout, during an unlikely circuit failure. These high power Omni-directional obstruction lamps are low on power consumption, which enables the unit to be operated on solar poweran obvious advantage in environments were power supplies are not readily available and countries lacking the necessary infrastructure. A standalone version with integral photocell is available. This type of fitting is suitable for obstruction markings on airports. It combines the improved and modern concept of surface mounted solid state lamps technology (High Powered Lighting Diodes) which are procured from market leaders. These, high power high flux, state lamps have an exceptionally long life of 50, 000 hours. They consume very less energy and thus ideally suited for Solar Powered Applications. The LED Aviation warning lights are mounted on very durable Epoxy masked PCB's which enables easy replacement in case of physical or technical damage. Efficient secondary optics is induced to generate Lens effect to give an omni-directional light beam in horizontal plane & arrest unnecessary light dispersion in vertical plane as required by the light specifications. Another unique characteristic of our twin obstruction light unit is its duplex nature. It helps in enhancing the reliability and durability of our product by automatically switching from Service lamp to Standby lamp. These warning lights are rested inside an improved gasket, which protects them from the attack of dust and moisture. A (bird spike) is positioned over the top of the light to protect the lights from bird droppings. These lights are built in a Photo controller to provide a 24x7 operation.
Technical Specifications of Twin LED Aviation Warning LightsMedium intensity LED obstruction lights are used in places where the structure is more than 45 meters high, above the ground level. With a life span of 50, 000 hours, Avaids medium intensity Aviation obstruction light is designed to for low power consumption. In the unlikely eventuality of a malfunction or problem, the light system is provided with an in-built, audio-visual alarm to warn the maintenance team.Our lights comply with ICAO, Annexure-14 type 'B'.These medium intensity lights are made up of high grade aluminum alloy with a protective coat of paint and stainless steel hardware for longer durability. Superior quality and latest LEDs are procured from global market leaders for higher intensity of light.The medium intensity LED light series use a high-flux LED light source with a proprietary high efficiency optic in a long life, low power consumption medium intensity red obstruction light. These are used for night time marking of obstructions between 45 meters and 150 meters high.The lightweight and compact medium intensity aircraft LED Obstruction light can be set up in either flashing or fixed modes, with either automatic or external day/night control, making it an ideal choice for both new systems and as a replacement for an existing light operating with third party controllers.
Advantages:
The major advantage of having a twin airport obstruction lights is that when the service light fails, the lighting switches onto its standby lighting system. This eliminates the eventuality of a complete blackout, during an unlikely circuit failure. It combines the improved and modern concept of surface mounted solid state lamps technology (High Powered Lighting Diodes) which are procured from market leaders. These, high power high flux, state lamps have an exceptionally long life of 100, 000 hours. They consume very less energy and thus ideally suited for Solar Powered Applications. The LED Aviation warning lights are mounted on very durable Epoxy masked PCB's which enables easy replacement in case of physical or technical damage. As laid down by the ICAO, we make the use of an efficient secondary optics which generates Lens effect. It gives an omni-directional light beam in horizontal plane & arrests unnecessary light dispersion in vertical plane. These warning lights are rested inside an improved gasket, which protects them from the attack of dust and moisture. A (bird spike) is positioned over the top of the light to protect the lights from bird droppings. These lights are built in a Photo controller to provide a 24x7 operation. QUALITY ASSURANCE: