Our Products
Machines And Equipments
1 Products availableDrill & Boring Equipments
1 Products availablePiston And Crankshaft Assemblies
1 Products availableIndustrial Machinery
1 Products availableSurface Finishing Machines
1 Products availableCrusher, Shredder & Presses
1 Products availableCutting Machine
1 Products availableOur product range contains a wide range of Con Rod Aligner
automatia line boring machine, model alh 1500 has boring capacity of 31 175 mm with a maximum length of block 1500 mm, max. Distance between built in parallels to boring bar 815 mm, max. Travel of boring bar 325 mm, spindle speed is infinitely variable at 50 750 rpm with vfd and is supplied with standard accessories as listed below
boring bar assembly with bearings, cones, extra supports and cutters |
|
|
|
into bore gauge (for measuring without removing boring bar) |
tool grinder |
extra cutter heads for 30 mm / 40mm/48 mm/60 mm boring bars |
extension for boring bar 125 mm |
small bushing for extra support |
Permanent Parallels | TSM – Tool Setting Micrometer |
Parallels 100mm high | Extra Support for Boring Bars |
Parallels 160 mm high | Boring Bar Rest |
Parallels 200 mm high | TSM with Dial Indicator & Magnetic Base |
Bearing Bushes for Boring Bars | Tool Setting Device for Cutter Heads |
Tapered Centering Cones | Centering Device with Dial Indicator |
Boring Bar 30 x 1600 mm (Hard Chrome plated) | Boring, Facing and Chamfering Tools |
Boring Bar 48 x 1900 mm (Hard Chrome plated) | Clamps, Bolts and Operating Tools |
Cutter Head for 30 mm Boring Bar (OD 50 x 70 mm) | Machine Lamp |
Cutter Head for 48 mm Boring Bar (OD 90 x 115 mm) | Operation Manual |
TECHNICAL SPECIFICATION | ALB 1500 | ALB 2500 |
---|---|---|
Boring Capacity (Standard Boring Bars) | 31 – 175 mm | 31 – 175 mm |
Boring Capacity (Optional Boring Bars) | 23 – 260 mm | 23 – 260 mm |
Maximum Length Of Block | 1500 mm | 2500 mm (98.5”) |
Max. Distance b/w Built-In Parallels To Boring Bar | Maximum : 815 mm Minimum : 515 mm |
Maximum : 815 mm (32”) Minimum : 515 mm (20”) mm |
Max. Travel Of Boring Bar | 325 mm | 325mm (12.8") |
Max Distance b/w top of bed to boring bar center | 875 mm | 875 mm |
Min Distance b/w top of bed and boring bar center | 575 mm | 575 mm |
Spindle Speed | Infinitely variable 50–750 rpm | 50–750 rpm |
Drive Motor | 1.5 HP , 960 rpm 3 phase, 415v, 50 Hospitalized | 1.5 HP , 960 rpm 3 phase, 415v, 50 Hz |
Feed: Both Directions Infinitely Variable SERVO | 0.01 – 0.5 mm/rev | 0.01 – 0.5 mm/rev |
Additional Travel With Extension Bar (Optional) | 325 – 450 mm | 325 – 450 mm |
this is a heavy duty valve seat cutting machine with micro precision, made from graded stainless steel and has centering guide stem made of a combination of carbide and steel facilitating perfect centering. The head movement is pneumatic which can be operated easily, which reduces noise and saves time. Digital centering aides in faster and accurate job alignment. The tip holder and inserts are specially designed to make accurate cutting angles at 30 and 45 degrees. This machine is equipped with a variable speed motor, dro (digital), or mechanical dial indicator which facilitates accurate depth control.
TECHNICAL SPECIFICATION | MODEL AVSC 1300 |
---|---|
Diameter of Spindle | 80 mm |
Maximum Spindle Travel | 200 mm |
Maximum Spindle Slant | 30 Deg |
Boring Range | 18-80 mm |
Spindle Speed Range (Variable) | 30-500 rpm |
Spindle Head Traverse – Cross Wise | 60 mm |
Spindle Head Traverse – Longitudinal | 1000 mm |
Distance from Spindle to Table Top | 500 mm |
Minimum Seat Cutting Diameter (Standard) | 18 mm |
Minimum Seat Cutting Diameter (Optional) | 14 mm |
Maximum Seat Cutting Diameter (Standard) | 100 mm |
Maximum Seat Cutting Diameter (Optional) | 120 mm |
Clamping Block Traverse – Cross Wise | 150 mm |
Clamping Table Size | 1600 x 600 mm |
Electric Motor | 1 Hp, 3 Ph, 415 v, 50 Hz |
Air Requirements | 6 Bar 100 psi |
Floor Area Requirement | 1800x1000x2200 mm |
Approx Shipping Dimensions (LxWxH) | 2000x1200x2300 mm |
DESCRIPTION | UNIT | DESCRIPTION | UNIT |
---|---|---|---|
Air Gun Set | 01 No | Insert Holder 25 – 40 mm | 01 No |
Allen Key Set | 01 No | Insert Holder 40 – 60 mm | 01 No |
Digital Centering System | 01 No | Insert Holder 60 – 80 mm | 01 No |
Carbide Stems – Custom Sizes | 06 Nos | Insert Holder 80 – 100 mm | 01 No |
Cutting Tool (3D – 45 Deg) | 02 Nos | Spanner 22 – 24 mm | 01 No |
Cutting Tool (3D – 30 Deg) | 02 Nos | Tool Setting Fixture | 01 No |
Cutting Tool (1D – 45 Deg) | 01 No | Job Support Plate | 01 No |
Cutting Tool (1D – 90 Deg) Facing | 01 No | Bushes PB | 06 Nos |
Cutting Holder Ball Head 0.375” | 02 Nos | Leveling Bolts | 04 Nos |
connecting rod boring machine, model arb500 is a high precision product designed to machine both new connecting rods as well as for reconditioning of worn connecting rods. This machine is provided with a sturdy boring spindle. The carriage is provided with both rapid & fine auto feed controlled by separate plc drive to facilitate a fine and speedy operation while boring.
salient features
TECHNICAL SPECIFICATION | MODEL ARB 500 |
---|---|
Minimum And Maximum Bore Centre Of Con-Rod | Min 80 – Max 600 mm |
Boring Spindle Speeds (Variable - VFD) | Infinitely variable, 100-1600 rpm |
Boring Range | Min ø15 – Max ø175 |
Feed Both Direction | Infinitely Variable |
Table Traverse - Crosswise | 50 mm |
Table Movement - Longitudinal | 450 mm |
Spindle Speed Motor | 1 HP 3PH 50 Hz |
Motor Table Feed (Variable Drive - VFD) | 0.5HP 3PH 50 Hz |
Length Of The Machine | 1200mm |
Width Of The Machine | 650mm |
Height Of The Machine | 2000mm |
Net Weight | 750kg (approx) |
Gross Weight | 900kg (approx) |
Shipping Volume | 3 m3 |
DESCRIPTION | UNIT | DESCRIPTION | UNI |
---|---|---|---|
Boring spindle ø-14 | 1No | Connecting rod clamping collar ø-14 | 1No |
Boring spindle ø -26 | 1No | Connecting rod clamping collar ø-26 | 1No |
Boring spindle ø -40 | 1No | Connecting rod clamping collar ø-40 | 1No |
Boring spindle ø -58 | 1No | Connecting rod clamping collar ø-58 | 1No |
Boring tools (03 Nos Each) | dia 10 & dia 6 | Centering cone | 1 Set 2Nos |
T.S.M frame | 1No | Allen key set | 1 Set 9Nos |
Centering device with dial gauge | 1No | Operating manual | 1No |
Tool setting micrometer assembly | 1No | Leveling plate | 4Nos |
Taper pin (o1 Set) | 7Nos | foundation bolt | 4Nos |
Taper pin (01 Set) | 5Nos | 14 mm Allen key | 01No |
Tool adjusting block | 1No |
the automatia vertical fine boring machine, model acb 1800, is ideally suited for automotive engines up to 1800mm length. This high precision machine is capable of boring automotive engine cylinders as well as small power tool engines and other industrial components. Rapid up & down movement of the spindle housing & automatic retrieval of the spindle after completion of boring operation using high precision servo motor facilitates turnover of engine blocks.
salient features
TECHNICAL SPECIFICATION | ACB 750 | ACB 1300 | ACB 1800 |
---|---|---|---|
Boring Range With Standard Spindles | ø46-100 mm | ø62-140 mm (2.5-5.51”) | Ø46-220 mm |
Boring Range With Extra Spindles | Ø32-190 mm | ø32-240 mm (1.25-9.44”) | Ø32-260 mm |
Maximum Boring Head Travel | 500 mm | 700 mm (27.55”) | 900 mm |
Distance From Spindle Centre To Column | 300 mm | 350 mm (14”) | 425 mm |
Milling Length | NA* | 1250 mm | 1500 mm |
Milling Width | NA* | 320 mm | 360 mm |
Spindle Speeds (with HMI) | 50-750 rpm (variable) | 50-750 rpm (variable) | 50-750 rpm (variable) |
Spindle Feed (Servo Controlled with HMI) | 0.01-0.5 mm (variable) | 0.01-0.5 mm (variable) | 0.01-0.5 mm (variable |
Quick Return Of Boring Slide | 1000 mm/min | 1500 mm/min | 1500 mm/min (optional) |
Table Surfac | 850x360 mm | 1350x410 mm | 1850x410 mm |
Table Traverse Longitudinal | 750 mm | 1300 mm | 1850 mm |
Table Travel Crosswise | 75 mm | 150 mm | 150 mm |
Max Distance between table | 650 | 1000 mm | 1350 mm |
Max Distance b/w Outer Cylinder Centre | 700 | 1200 mm | 1600 mm |
Spindle Motor With AC Drive | 1.5 HP, 2800 rpm | 1.5 HP, 2800 rpm | 2 hp, 2800 rpm |
Delta HMI Colour Digital Display | 5.5" | 5.5" | 7" |
MPG For Chamfering | UFO-01-2d-18 | UFO-01-2d-18 | UFO-01-2d-18 |
Servo Motor | 400 watts, 3000 rpm | 400 watts, 3000 rpm | 400 watts, 3000 rpm |
Floor Space Required in mm | 1500x2000 | 1800x2500 | 2000x3700 |
Total Height in mm | 2000 | 2400 | 3000 |
Net Weight (Approx) in Kg | 1000 | 2200 | 2800 |
Gross Weight (Approx) in Kg | 1200 | 2600 | 3200 |
Shipping Dimensions (LxWxH) in mm | 1000x1000x2200 | 1600x1600x2700 | 1800x2600x3100 |
Gear Box Movement | Precision ball screw | Precision ball screw | Precision ball screw |
Gear Box Movement | Precision ball screw | Precision ball screw | Precision ball screw |
* NA-Not applicable
ACH 500 is a high precision versatile honing machine suitable for honing applications. The machine has only few moving parts, which ensures least wear. The infinitely variable speeds for rotational and reciprocal speeds achieved hydraulically, enables one to get the required cross hatch pattern. When switched off, the control system of the machine reverts to the upper most position, so that it is convenient to adjust the hones and also prevent damage to the cross hatch patterns.
Salient Features
TECHNICAL SPECIFICATION | ACH 500 |
---|---|
Max Honing Capacity In Diameter (Standard Heads) | 200mm |
Max Honing Capacity In Diameter (With Extra Heads) | 300mm |
Min Honing Capacity In Diameter | 30mm |
Honing Stroke | Maximum - 500mm, Minimum - 50 mm |
Max Block Length | 1400 mm |
Max Block Width | 550 mm |
Max Block Height | 600 mm |
Spindle Speed (Variable) | 10 - 300 rpm |
Reciprocal Speed | 1 - 20 m/min |
Honing Table Traverse | 1300 mm |
Honing Head Traverse, Crosswise | 50mm |
Max Distance Of Spindle Nose To Table Top | 1050 mm |
Distance From Spindle Center To Column Front | 450 mm max |
Table Size | 1500 x 500 mm |
Motor For Rotation | 2 hp AC drive |
Motor For Hydraulic Stroke | 1.5 hp |
Motor For Coolant System | 0.25 hp |
Net Weight (Approx) | 1200 kg |
Shipping Weight (Approx) | 1500 kg |
Shipping Dimensions (LxWxH) | 2450x1550x2225 mm |
96.5”x61”x88.75” inches | |
Shipping volume | 8.5 m3 |
Con-Rod Aligner Model ARA 350 is equipment for checking the Twist and Bend on a Connecting Rod. The bores of any reconditioned con-rod should the Straight as well as Parallel.
TECHNICAL SPECIFICATION | MODEL ARA 350 |
---|---|
Diameter | |
Minimum | 40 mm |
Maximum | 80 mm |
Max. Length of Con-Rod | 350 mm |
Crankshaft Straightening Press, Model ACP 2000 is a simple manually operated Hydraulic Press designed to straighten crankshafts at the point of distortion, by peening at the fillet radius when the crankshaft is in a stretched position. This method of bend removal prevents distortion of grain structure and the balance of the crankshaft remains true.
TECHNICAL SPECIFICATION | MODEL ACP 2900 |
---|---|
Max Distance Between V Block | 2900 mm |
Min Distance Between V Block | 250 mm |
Maximum Length of Crankshaft | 2500 mm |
Maximum Journal Diameter | 130 mm |
Height of “V” Blocks from Bed | 250 mm |
Length of Equipment | 3400 mm |
Width of Equipment | 680 mm |
Height of Equipment | 1475 mm |
Net Wt. (approx) | 400 kg |
Gross Wt (approx) | 600 kg |
Shipping Dimensions (LxWxH) | 3500x50x1000 mm |
Hydraulic Pump Capacity | 25 ton |