Our Products
Cutting Machine
1 Products availableMachines And Equipments
1 Products availableDrill & Boring Equipments
1 Products availablePiston And Crankshaft Assemblies
1 Products availableIndustrial Machinery
1 Products availableSurface Finishing Machines
1 Products availableCrusher, Shredder & Presses
1 Products availableWe offer a complete product range of crankshaft grinder, Vertical Surface Grinding Machine, Crank Shaft Grinder Machine, Tool Grinder and Crankshaft Grinding Machine
our vertical surface grinding machines are high precision product which is also equipped with milling facility. Advanced design of the wheel head and simple operating system assure smooth operation, superior finish, and higher productivity. This machine is ideal for engine rebuilding, manufactures, and general engineering application. In the automobile industry, this machine is capable of grinding and/or milling of cylinder blocks and heads made of both cast iron and aluminum.
salient features
STANDARD ACCESSORIES | OPTIONAL ACCESSORIES | |||
---|---|---|---|---|
DESCRIPTION | ASG | DESCRIPTION | ASG | DESCRIPTION |
Setting Up Parallel | 01 set | Milling Head With Milling Tool | 01 no | Roll over fixture for V-block |
Block Tightening Side Clamp | 02 nos | T Bolt With Nut & Washer | 08 nos | |
Block Tightening Clamp With Nut | 04 nos | Rexine Sheet | 02 nos | |
Wheel Balancing Mandrel With Nut | 01 no | GI Pipe ½" | 04 nos | |
Pad Weight Adjusting | 08 nos | Wheel Dresser (In-Built) | 01 set | |
Box Spanner | 01 no | Allen Key 1.5 - 10 Mm | 01 set | |
Wheel Extractor | 01 no | Spanner Double End 20/22, 24/27 Each | 01 no | |
Plate Leveling With Bolt | 03 nos | Operation Manual | 01 no |
ECHNICAL SPECIFICATIONS | ASG - 1000 | ASG – 1500 | ASG – 1800 |
---|---|---|---|
Table Clamping Surface | 1000 x 300 mm | 1500 x 350 mm | 1800 x 400 mm |
Automatic Table Travel | 1200 mm | 1500 mm | 1800 mm |
Table Feed Rate (Servo With Ball Screw) | Variable | Variable | Variable |
Max. Distance Between Table & Wheel Head | 500 mm | 750 mm | 1000 mm |
Vertical Head Traverse | 550 mm | 750 mm | 1050 mm |
Segment Wheel | ø 350 mm | ø 400 mm | ø 400 mm |
Grinding Head Rapid Movement(Servo with Ball Screw) | Variable (MPG) | Variable (MPG) | Variable (MPG) |
Grinding Wheel Motor Power | 3 hp, 980 rpm 3 Ph, 415 V, 50 Hz | 3 hp, 980 rpm 3 Ph, 415 V, 50Hz | 3 hp, 980 rpm 3 Ph, 415 V, 50Hz |
Grinding Head Spindle Speeds Rpm | 250, 550, 1000 rpm | 250, 550, 1000 rpm | 250, 550, 1000 rpm |
Servo Motor – Table Traverse | 400 W | 750 W | 750 W |
Servo Motor – Grinding Head Movement | 400 W | 400 W | 400 W |
Hand Feed for Grinding Head 1 div/0.01 mm | MPG | MPG | MPG |
Coolant Motor Power | 0.25 h.p | 0.25 h.p | 0.25 h.p |
Table Movement | Precision Ball Screw | Precision Ball Screw | Precision Ball Screw |
Gross Weight (Approx) | 2700 kg | 3200 kg | 3500 kg |
Packing Case Dimensions (LxWxH) in mm | 3000 x 1666 x 2000 | 3300 x 1600 x 2600 | 3500 x 1600 x 2800 |
Shipping Volume (Approx) | 11 m³ | 13 m³ | 15.2 m³ |
Maximum Milling Width | 370 mm | 420 mm | 420 mm |
Maximum Grinding Width | 350 mm | 400 mm | 400 mm |
Maximum Grinding Length | 1000 mm | 1200 mm | 1600 mm |
Distance from column to table center | 350 mm | 350 mm | 400 mm |
The Automatia Crankshaft Grinding Machines, ACG 1500 & ACG 2100 are high precision products designed for regrinding of Crankshaft. The machines combine high precision operation with a length of up to 1500mm and 2100mm respectively. These machines are designed for the machining of crankshafts for single cylinder engines, passenger cars, LCV, and HCV engines. These machines create high productivity rates with increased flexibility in grinding of both Main and Pin Bearings.
Salient Features
TECHNICAL SPECIFICATION | ACG 1500 | ACG 2100 | ACG 2700 |
---|---|---|---|
Maximum Grinding Length | 1500mm (60”) | 2100mm (82”) | 2700mm (106”) |
Maximum Distance Between Chuck | 1450 mm | 2050 mm | 2650 mm |
Height Of Table Top To Center | 310mm | 310mm | 310mm |
Max Stroke Wheel Head | 350mm | 350mm | 400mm |
Max Swing Over Table | 620mm | 600mm | 600mm |
Max Head Offset | 110mm | 110mm | 200mm |
Max Work Piece Diameter In Chuck | 600mm | 600mm | 600mm |
Work Head Spindle Speeds (Continuously Variable - VFD). OP* | 20 – 100rpm | 20 – 100 rpm (VFD) | 20 – 100 rpm (VFD) |
Table Slow Feed Per Turn Of Hand Wheel | 1mm/rev | 1 mm/revolution | 1 mm/revolution |
Table Fast Feed Per Turn Of Hand Wheel | 5mm/rev | 5 mm/rev | 5 mm/rev |
Table Speed Step-Less (Servo) | OP* | OP* | 5-300 mm/min |
Head Stock Spindle Motor | 1hp,960rpm | 1hp,960 rpm | 2hp,960 rpm |
Grinding Wheel Motor | 5hp,1440rpm | 5hp,1440rpm | 7.5hp,1440rpm |
Grinding Slide Servo Motor | 400watts | 400watts | 400watts |
Coolant Motor | 0.25hp,1440rpm | 0.25hp,1440 rpm | 0.25hp,1440 rpm |
Grinding Wheel Diameter | 660mm, 710mm | 710mm | 813mm |
Total Length of Machine | 3500mm | 5200mm | 6000mm |
Work Space Required | 5600 X 2000mm | 7000 x 2000mm | 8800 x 2300mm |
Net Weight (Approx) | 3500kg | 5000kg | 6300kg |
Gross Weight (Approx) | 4000kg | 5400 kg | 7000 kg |
Slide Movement | Precision Ball Screw | precision ball screw | precision ball screw |
Automatic Sizing Gauge | HMI | HMI | HMI |
Stroke Measuring Gauge | HMI | HMI | HMI |
Hydraulic Power Pack | NA* (Servo Control) | NA* (Servo Control) | NA* (Servo Control) |
Auto Table Traverse (Servo Control) | OP* | OP* | OP* |
Slide Lubrication OP* | PLC controlled Auto | PLC controlled Auto | PLC controlled Auto |
* NA-Not applicable
* OP-Optional
Tool Grinder, Model ATG 150 is a precision tool grinder for sharpening of Boring & Valve Seat Cutting Tools. The ATG 150 is provided with a Grinding Wheel on one end and a Diamond Lapping Wheel on the other. Unlike other grinders, the tool is ground on the face of the wheel.
TECHNICAL SPECIFICATION | MODEL ATG 150 |
---|---|
Grinding Wheel Diameter | 150 mm |
Lapping Wheel Diameter | 150 mm |
Motor | 0.5 Hp, 3ph, 415 v, 50 Hz |
Net. Without | 45 kg |
Gross Wt. | 60 kg |
Length of Equipment | 3400 mm |
Shipping Dimensions (LxWxH) | 700x650x400 mm |