Other Products / Services #1196189

A fire in the engine compartment of passenger vehicles is a very serious situation. An engine fire can grow very large very quickly, threatening lives and property. If the vehicle is moving, the airflow thorough the engine compartment can make detection and suppression more difficult. ACEC is proud to offer automatic fire detection systems that are specifically designed to work effectively in the conditions in which vehicles operate while offering superior fire protection.

236031 Grease Hose - 700 Bar (70-200 mt. loose abstract length) 8.4 mm236032 Grease Hose-700 Bar, 50 mt. 8.4 mm236033 Grease Hose-700 Bar, 100 mt. 8.4 mm236034 Pre Filled Grease Hose-700 Bar (50 mt. NLGI-2) 8.4 mm236033P Polyamide Tube 6 mm

Space saving stylish design, Compact size, rotatable seat Virtually silent operation, Choice of leaving bowl wet or dry after use, Non-clogging large bore flush pump macerates waste, Uses less than 1.0 amphour per day, ISO 8846 MARINE - Ignition Protection, Raw water only

For starting or stopping electrically operated equipment such as signal lights, alarms, motors, automatic burners, metering devices and others, In-line configuration eliminates need for a pipe tee, Paddles available for low, medium or high flow, Two electrical knock-outs allows connection from either end, Sensitivity adjusting screw makes flow adjustment easy, Single pole, double throw snap switch, Hardened stainless steel bearings minimize friction, Sealed Monel bellows, Minimum temperature (fluid or ambient) 32F (0C)

Tough Reinforced Plastic Housing, Mount to any surface, Slip-On Inlet and Outlet Ducting Connection, Efficient High Volume Air Flow, Low Current Draw, Corrosion-Resistant Materials Throughout, N.M.M.A. Type Accepted, DC Models comply with USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection, DC Models comply with Complies with ISO 9097 MARINE

OIL EQUIPMENT Air-Operated Transfer Pumps Wall Mounted Transfer Kit Accessories For Transfer Pumps Pneumatic Pumps For Oil And Antifreeze Double Acting Pneumatic Pumps Kits For Distributing Oil And Antifreeze Industrial Pumps 900 Accessories For Industrial Pumps 900 Oil Dispensing Guns Accessories For Oil Pumps Oil Bar (Oil Dispenser) Modular Extensions For Oil Pumps Manual And Pnuematic Oil Dispensers

• High Pressure Pneumatic Grease Pumps
• Pneumatic Kits For Greasing
• Accessories For Grease Pumps
• Trolleys
• Industrial Pumps 900
• Accessories For Industrial Pumps
• Portable Grease Pumps

LITE FLUSH TOILET

• REQUEST A QUOTE
• Space saving stylish design
• Compact size, rotatable seat Virtually silent operation
• Choice of leaving bowl wet or dry after use
• Non-clogging large bore flush pump macerates waste
• Uses less than 1.0 amp/hour per day
• ISO 8846 MARINE - Ignition Protection
• Raw water only

Model No.: 58500 Series
Electric toilet designed with the same 'footprint' as a Jabsco manual toilet. Available with single touch fully automatic foot switch or a control pad offering 'one touch' 'fill' and 'flush' options.

TWIST 'N' LOCK MANUAL TOILETS

REQUEST A QUOTE

Jabsco is the world's largest manufacturer of small craft marine toilet systems and we have applied all our experience into our latest Manual Toilet refining the design that is used by nearly all boatbuilders worldwide. For extra safety and peace of mind the intuitive, simple to use, Twist 'n' Lock action handle guards against syphonic flooding and waste backflow. With one easy 90 turn of the handle, the lock is applied. Turning the handle back to the natural operating position opens the lock again.

Model No.: 29090 and 29120

Twist 'n' Lock safety handle and flush control lever.

Powerful swirl action for efficient flushing.

Full sized external seal housing allows quick clean seal replacement and instant access to pump cylinder.

Powerful self-priming pump for above or below waterline installation.

Crevice free contours and smooth mouldings for added hygiene.

Automatic vacuum breaker for easier pumping.

Angled pump housing and long stroke for more comfortable operation.

AC/DC 150 CFM (4.2 M3/MIN)

FLANGEMOUNT 3" BLOWERS

• Model No.: 34739 Series
• Tough Reinforced Plastic Housing
• Mount to any surface
• Slip-On Inlet and Outlet Ducting Connection
• Efficient High Volume Air Flow
• Low Current Draw
• Corrosion-Resistant Materials Throughout
• N.M.M.A. Type Accepted
• DC Models comply with USCG Regulation 183.410 and ISO 8846 MARINE for Ignition Protection
• DC Models comply with Complies with ISO 9097 MARINE

The KPL-24 is an electrically powered grease lubricator specifically designed for use on heavy construction machinery. It is powered directly by the internal DC 24V batteries standard in most construction machines. The KPL-24 is compact, sturdy and provides maximum portability on any work site especially where there may be no other readily available power sources. It is designed to fit onto any standard 18-liter grease pail. It has a high discharge pressure and is capable of pumping grease of various viscosities.

A variety of accessories are available including different length hoses, power cords, reels and metering devices. This makes the KPL-24 a very efficient and flexible option for every work site

This control unit is designed for use on All pumps used on vehicles and construction machines. Run time between 01-07 min. and Pause time between 30-210 min. For more flexible options of timing, minimum batch qty. of 50 no. Optional external alarm. Rated output: 10 amp relay, Protection: Fuse Protection 3 amp quick action fuse. Can also be mounted inside a panel. The control unit resumes at the correct point after electrical supply interruption. High speed mode for testing provided.

Working pressure: steady: 75% of full scale value, Working temperature range : ambient: -25C a 65C, Overpressure: 25% 100bar, Casing body: liquid filled in stainless steel case with safety vent. Band ring: stainless steel AISI 304, Fissing flange: stainless steel AISI 304 with 3 holes, Dial: white painted aluminium with indelible black and red graduation MCS green mark, Needle: black painted aluminium, Transparent cover: polycarbonat, Connection: brass for pressure up to 600bar

A fire in the engine compartment of passenger vehicles is a very serious situation. An engine fire can grow very large very quickly, threatening lives and property. If the vehicle is moving, the airflow thorough the engine compartment can make detection and suppression more difficult. ACEC is proud to offer automatic fire detection systems that are specifically designed to work effectively in the conditions in which vehicles operate while offering superior fire protection.

A fire in the engine compartment of passenger vehicles is a very serious situation. An engine fire can grow very large very quickly, threatening lives and property. If the vehicle is moving, the airflow thorough the engine compartment can make detection and suppression more difficult. ACEC is proud to offer automatic fire detection systems that are specifically designed to work effectively in the conditions in which vehicles operate while offering superior fire protection.

defines a complete range of hydraulic miniature fittings, check couplings and accessories. MCS offers a simple, inexpensive means to check pressure in hydraulic systems. Permanently mounted pressure gauges and shut-off valves are no more necessary, thereby reducing initial costs. Replacement costs due to gauges broken by system problems or external damage are also eliminated.

MCS check couplings can be installed at any point of the hydraulic system where pressure is to be monitored. For remote or hard-to-reach locations, an MCS bulkhead coupling and an MCS micro-bore hose bring pressure to a central panel thus simplifying its control. The micro-bore hose is so small and flexible that it can be installed like electrical wiring.

Pressure can be checked while hydraulic systems are at full pressure. Micro test fittings and micro-bore hoses can bear a max. working pressure of 630 bar. Thanks to their design, both the connector and the micro hose coupling can be joined under pressure by screwing the coupling with two fingers without any tools and any leakage; the connection is self-sealing and will not loosen under vibration or pressure peaks.

MCS offers optional hose ends to adapt to many other test couplings from other suppliers. Besides, they can be used for obtaining fluid samples from various points in hydraulic systems or as an air bleed device.

The "Mini Control System" is versatile enough to be used instead of rigid pipes for pressure gauges, pressure switches, pressure transducers, pilot lines, etc.

It dampens pressure peaks and prevents vibration from reaching the instruments, thanks to the micro hose's capillary effect.

Duplex II Series Pumps
The Duplex II series of pumps incorporate the best technology and features developed by Xylem Flojet. Everything from the flow preventer, check valves, bearings and diaphragm assembly to the motor have been designed to make this truly the most advanced and reliable diaphragm pump available. Higher efficiency of the pump is evident in the longer life of the motor pump unit. The new diaphragm design combined with the new valves, makes the pump capable of pulling higher dry vacuum. Duplex II is available in various performance ranges, voltages and with a choice of elastomers, making it easily adaptable to a diverse range of applications.

Features

• Self-priming up to 8 feet (2.4 m)
• Can run dry without damage
• Chemically resistant materials
• Internal bypass standard
• Built-in back flow preventer
• Heavy-duty ball bearing drive system
• UL, CSA and CE models available

Art. 37704
Digital dispensing oil gun with preselection,
equipped with:

• Inlet swivel jointF 1/2
• Flexible terminal
• Semiautomatic nozzle 16 mm

Flow rate: 3.4 USgpm, maximum head 40ft (17.3psi)Self-priming from dry up to 1.5m (4.9ft)

Model No.: 12210 Series

• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow

040 Size Bronze Flexible Impeller Pump

Flow rate: Nominal 40 Litres/min (8.9 gallons/min) at 1500rpmSelf-priming from dry up to 2.4m (7.8ft)Pressure up to 1.5 bar
Model No.: 22860 Series

• Easy to service and maintain.
• Will tolerate abrasive wear (this may affect performance - seek advice from your distributer).
• Handles hard and soft solids without clogging.
• Non pulsating flow
• Gentle pump action does not damage shear-sensitive products
• Uses standard IEC 71 motor B3/B14 D80 frame

• This control unit is designed for use on All pumps used on vehicles and construction machines.
• Run time between 01-07 min. and Pause time between 30-210 min.
• For more flexible options of timing, minimum batch qty. of 50 no.
• Optional external alarm.
• Rated output: 10 amp relay
• Protection: Fuse Protection 3 amp quick action fuse.
• Can also be mounted inside a panel.
• The control unit resumes at the correct point after electrical supply interruption.
• High speed mode for testing provided.

PART NO.
2360216	Ferule	6mm
2360217	Nut	10 x 1 mm
2360218	Nut	1/8 bsp

PART NO.
236096A	Straight Coupling	M10x1
236096B	Straight Coupling	M8x1
236096C	Straight Coupling	M6x 1
236091	Straight Coupling	1/8 NPT
236097A	Elbow Coupling	M 10x1
236097B	Elbow Coupling	M8x1
236097C	Elbow Coupling	M6x1
236092	Elbow Coupling	1/8 NPT

HIGH PRESSURE TUBE

LUBRICATION FILTERS

GREASE NIPPLES

Grease Nipples in all Dimensions & Sizes. Minimum batch qty. 200 pic. in each size.

CompositionN.1 Plastic box KP1N.2 Glicerine-filled pressure gauges D.63N.1 Micro-hose 6400-10.162-50.204-2000mmOrder code750.KP1 + indicate the scale of the gauge.Available scales: 0-60-100-250-400-600-1000-1600-2500-4000-600 Dimensions: 240x200x40 mm

ir-Operated Transfer PumpsWall Mounted Transfer KitAccessories For Transfer PumpsPneumatic Pumps For Oil And AntifreezeDouble Acting Pneumatic PumpsKits For Distributing Oil And AntifreezeIndustrial Pumps 900Accessories For Industrial Pumps 900Oil Dispensing GunsAccessories For Oil PumpsOil Bar (Oil Dispenser)Modular Extensions For Oil PumpsManual And Pnuematic Oil Dispensers

LOCKING SCREW