Ambala, Haryana, India
Our Products
Temperature recorders for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen items.
Data loggers are designed for recording of temperature only or temperature in combination with other signals. Values are stored to a non volatile memory. Data transfer to the PC is performed via serial interface USB, RS232 or Ethernet by means of proper adapteror GSM modem.
Advantages: - included traceable calibration certificate- fast data transfer to the PC full memory of 32 000 readings in approximately 30s- variability of connection to the computer USB, RS232, Ethernet, GSM modem- permanent connection to the PC enabled, data is possible to download even during logging- large dual line display with special symbols- optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)- dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display or LED.- two alarm modes: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared)- robust watertight case, easy installation, locking enabled- low power consumption battery life up to 7 years, indication of remaining battery life, easy battery replacement- standard temperature sensor is Pt1000, switchable to Ni1000/6180ppm at range -50 to +150C- models S0841 and S0842 are able to combine temperature measurement with logging of contact state e.g. Door contact- logging start/stop is enabled in several ways: at certain time and date programmed from computer, by magnet or depending on binary input state (S0841 & S0842 models)- also special logging mode is enabled when logging runs only, if some of measured values are out of adjusted alarm limits- each logger can describe with text - maximum of 32 characters- each channel can describe with text - maximum of 16 characters- password protection is enabled to prevent unauthorised manipulation with logger
USB Temperature Logger Features
Data loggers are designed for recording of temperature, temperature and humidity or temperature together with signal from contact. Values are stored to a non volatile memory. Data transfer to the PC is performed via USB, RS232, GSM or Ethernet interfaced by means of an adapter.
Advantages - included traceable calibration certificate- easy user adjustment and calibration of relative humidity by means of optional accessory and PC software- variability of connection to the computer USB, RS232, Ethernet, GSM modem- fast data transfer to the PC (full memory of 32 000 readings in approximately 30s)- permanent connection to the PC enabled, it is possible for data to download even during logging- large dual line display with special symbols, switchable- optional display of minimum and maximum measured values (reset of min/max memory from PC or by magnet)- dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display or LED- two alarm modes: instant or with memory (detected alarm is indicated permanently till alarm memory is cleared)- robust watertight case, easy installation, locking enabled- low power consumption battery life up to 7 years, indication of remaining battery life, easy battery replacement- standard temperature sensor is Pt1000- combination of measurement of temperature and RH with two user calibrated voltage signals 0-5V- logging mode is enabled, if measured values are out of adjusted alarm limits - each logger can describe with text - maximum of 32 characters- each channel can describe with text - maximum of 16 characters - password protection is enabled to prevent unauthorised manipulation with logger
