Our Products
Industrial Pump
2 Products availableEngine & Engine Parts
1 Products availableGenerators
1 Products availableMonoblock Pumps
1 Products availableSubmersible Pumps
1 Products availableWater Tanks
1 Products availableWe offer a complete product range of
Our Generating sets are appropriate answer to frequent power failure and flickering of supply voltages to save all Household appliances and all type of Costly Gadgets.
SALIENT FEATURE :The Generating set consist of one Diesel Engine as prime mover and one Alternator as power generating source and both are coupled through self aligning rubber coupling and mounted on a robust Mild steel channel frame fitted on rubber wheels which provides the sets easy movability and acts as damper to vibration. So the set can be installed either on ground floor or on roof top with provision of shielding against rain water.
Drive | 0.5 HP / 0.37 KW | 1.0 HP / 0.75 KW |
Voltage | 230 V | 230 V |
Speed | 2800 RPM | 2800 RPM |
Current | 1.7 | 3.2 |
Condenser | 10 MFD | 12.5 MFD |
Power Consumption | 400 W | 650 W |
Insulation | B Class’ | B Class |
Rating | Continuous | Continuous |
Each component to the pump is subjected to rigorous inspection at various stage of manufacture and assembly resulting in a high quality standard of the pump. Full performance testing of the pumps is done as per statistical quality control plan.
Volute casting is made of close grained cast iron, designed with smooth spiral passage to Convert kinetic energy into pressure energy with low resistance to flow.
IMPELLERThe Impeller made of close grained cast iron has well designed vanes to convert most of the velocity into pressure with a high degree of efficiency.
SHAFTMade of ground EN 9 Steel for minimum wear and tear and long life.
BALL BEARINGGrease lubricated ball bearing is of the highest quality to give noise and trouble free operation.
Sturdy cast iron construction to with stand axial trust.
STUFFING BOXWell designed with high quality graphite gland packing to provide effective water, seal and cool and friction less operation.
SUCTION DELIVERY PIPE FLANGESFaced and drilled for leak proof mounting.
QUALITY CONTROL & TESTINGEach component to the pump is subjected to rigorous inspection at various stage of manufacture and assembly resulting in a high quality standard of the pump. Full performance testing of the pumps is done as per statistical quality control plan.
Size in Inch | R.P.M. | Head Meter | Disch. LPS | Recommended engine H.P. |
80 x 65 | 1500 | 15 | 15 | 5.0 |
80 x 80 | 1500 | 15 | 16 | 5.0 |
100 x 80 | 1500 | 12 | 17 | 6.5 |
100 x 100 | 1500 | 12 | 17 | 8.0 |
Diesel engines both in the indigenous market and abroad have received approbation for their reliability, economy in operation, durability longer life and exquisite performance. Specially designed to meet the needs of the agricultural sector and multi various general uses.
Vertical, Water cooled, Air cooled, Compression ignition, Four stroke cycle, Cold start, constant speed diesel engines.
ROTATIONThe Standard rotation is clock-wise facing the fly-wheel in High Speed engines and facing fuel pump in Slow Speed engines.
STARTINGCold starting by manual cranking. A detachable pawl type starting handle is supplied.
FUEL SYSTEMFuel is supplied to the fuel pump by gravity feed from fuel tank through felt/fabric/paper element filter. A Button filter is also provided at the inlet of Automizer.
LUBRICATIONForce feed by plunger type lubricating oil pump to large end bearing. Main bearing, cam shaft bush bearing. Rocker arm bushes etc. are Splash lubricated in High speed engines but in slow speed engines value. Rocker bush are manually lubricated and all other parts are splash lubricated. In Double cylinder engines force feed by Gear type lubricating oil pump to main bearings, large end bearings and oil the parts are splash lubricated.
BEARINGSMain bearings are tapper roller bearing. Large-end bearings and main bearing of Double Cylinder engines are white metal or aluminum alloy lined, steel backed thin walled bearings value rocker, Small end connecting rod cam shaft are provided with bush bearings.
Constant Speed centrifugal governor is mounted on the cam shaft gear wheel. Speed variation is controlled within limits to comply with Indian Standard Specifications.
BALANCINGEngine is efficiently balanced with two balance weights boltes on Crank Shaft in high speed engine and in slow speed engine the balance weights are provided in fly wheel itself. Flywheel is statically balanced to give smooth operation and ensure long life of parts.
COOLINGEngines are water cooled and cooling is arranged by run through water supply or radiator or cooling tank. In Air cooled engines cooling fan is provided in the engine.
EXHAUST SYSTEMTo minimize the exhaust sound a pepper-port type silencer is provided.
AIR CLEANEROil bath type air cleaner is fitted for efficient cleaning of inlet air.
STANDARD EQUIPMENT
H.P. | KW | R.P.M. | BORE mm | STOCK mm | S.F.C. g/kWh. |
3.5 | 2.6 | 1500 | 85.0 | 80.0 | 249 |
4.0 | 2.9 | 1500 | 85.0 | 80.0 | 249 |
4.5 | 3.3 | 1500 | 85.0 | 110.0 | 249 |
5.0 | 3.7 | 1500 | 80.0 | 110.0 | 243 |
6.5 | 4.8 | 1500 | 85.0 | 110.0 | 239 |
7.5 | 5.5 | 1500 | 87.5 | 110.0 | 251 |
ATUL PREMIUM WATER STORAGE TANKS are manufactured on Bi-axial Three Arm Rotational Moulding Machine, latest Technology which provides uniform wall thickness, strength and smooth finish. Atul Tanks are manufactured from Linear Low Density Poly Ethylene (LLDPE) as per the latest BIS specifications.
Capacity 200 Ltrs. to 5000 Ltrs.(2 to 5 layers)
Colour Available in different Colour
Advantage1.Light Weight :Hence easy to transport and reduce dead load on structure.
2.Low Cost and Durable :Economical as compared with Rcc & M.S. Tanks and lasts for years and years.
3.Hygienic :Suitable for potable water & does not impact any taste or odour.
4.Easy to Clean :Hence does not promote growth of bacteria & insects.
5. Maintenance Free :Requires no painting, no water proofing or anti-corrosive treatment.
6. High Impact Strength :Because moulded in single piece without any seams, joints or welds.7.Versatile :Can be used for underground, overhead, indoor storage & transportation.
8.Easy to Install :All Atul Tanks can be proved with Glfitings in sizes 1/2, 3/4, 1, 1 1/2, 2 for outlet-inlet, overflow and scour connection and foot valve. The tanks can be provided with PVC & Brass fillings optional.
9.Availablein different colours.
Note : The information given herein are in good faith but does not carry any warranty. Specifications may change from time to time.
S.no. | Capacity Litres |
Dimensions (mm) | ||
Dia. | Height | Manhole size | ||
1. | 200 | 725 | 585 | 280 |
2. | 300 | 730 | 875 | 280 |
3. | 500 | 895 | 950 | 400 |
4. | 750 | 985 | 1085 | 400 |
5. | 1000 | 1090 | 1200 | 400 |
6. | 1500 | 1325 | 1275 | 400 |
7. | 2000 | 1375 | 1675 | 450 |
8. | 3000 | 1450 | 2050 | 450 |
9. | 5000 | 1950 | 1925 | 450 |
To meet with global objective of community development and to provide safe potable water to every citizen within a accessible distance. Atul Deepwell & Hand Pumps are manufacturing ATUL DEEPWELL & HAND PUMPS India Mark-II.
ATUL DEEP WELL & HAND PUMP has a production capacity of 5000 Hand pumps per month. All spare parts are manufactured in own plant. The facilities in plant includes lathe machines, milling machines, slotting machines, fully automatic band-saw machine, cylindrical and center less machine, fabrication shop having welding sets, assembly shop, Quality Assurance & Quality Control lab etc.
AdvantageInstallation and maintenance of Deep well Hand pump is extremely simple and can be done by unskilled personnel with little training with size or well can be 100 to 150 mm. The pump has the pumping capacity from well as deep as 50 meters.Pump has a mechanical advantage of 8:1 in the Handle Bar level which ensures effortless operation 7 8:1 i the Handle Bar level can easily operate the pump.
Fully steel fabricated and galvanised for protection against corrosion
Institutional sales to large institution like U.P. Jal Nigam, U.P. State Agro Industrial Corporation Ltd. Chattisgarh, Agro Domestic Market of U.P., M.P. & Rajasthan
ATUL GENERATORS PVT. LTD. (HAND PUMP DIVISION) has been engaged in the manufacturing, supply and installation of India Mark-IIDeepwell Hand Pumps conforming to IS 15500 for several years as a part of Indian government objectives of providing patable water to every citizen.
PLANT / PRODUCTION CAPACITY :Plant has production capacity of 100, 000 units per annum. All major components are manufactured within the plant under strict quality control supervision in line with the requirments of accredited Quality Management System as per ISO:9001-2000. The manufacturing machineries include Lathes, Milling, Slotting, Band-Saw, Power Presses, Hack-Saw, Welding Transformers etc.
DESCRIPTION :These Hand Pump are suitable for installatiion in Boreholes fitted with casing pipes of nominal diameter from 100mm. The hand pump unit is split into following assemblies
PUMP HEAD ASSEMBLY:It is also called as Above Ground Mechanism of the pump consisting of head, handle assembly, water tank & stand. The complete pump is fully hot dip galvanised for production against corrosion.
CYLINDER ASSEMBLY:It body is made of Graded Cast Iron having a seamless brass tube fitted in the bore. It also consists of a foot value assembly made of gunmetal as per IS:318-1981, Buckets and sealing rings made of Nitrile rubber.
CONNECING ROD:There are 10 Nos. of fully electroplated mild steel bars of 12mm diameter with hexagonal couplers and locknuts welded on both the ends.
RISER PIPE:32mm N, B, Galvanised Piper Medium The Piped are of 3 meters standard length along with socket.
ATUL was incorporated in the year 1962. Within a short span of the time company becomes one of the leading manufacturer & exporter of V3, V4 submersible pumps, open well submersible pumps, monoblock pumps, centrifugal pumps, sevage pumps, self priming pumps & customized pumps in India
It was ATUL to introduce V-3 & V-4 submersible pumps in Indian Market.
It was ATUL to introduce V-3 & V-4 submersible pumps in Indian Market.ATUL is Indias largest manufacturer & exporter of 4 submersible pumps, but that is just a small part of the complete wide range of submersible pumps available to our professional dealer. ATUL AGRA certified ISO 14001:9001 Company thats what you need in your bore. ATUL has a wide range of 3 borehole submersible pumps that suit various kinds of user requirements.
Borehole submersible pumps for wells from 3 to 10- inch wells, with 2-pole electric motors. The most complete range of submersible borehole electric pumps to meet all your borehole pumping applications suitable to replace standard surface pumps, carrying the advantages of lesser space needed, less maintenance and complete absence of noise. In all domestic, industrial and agricultural applications, where it is required to life water out from below the ground and to push it above with pressure.
Our customers know that a one-size fits all approach just is not going to satisfy todays demanding consumer. By utilizing ATUL Pumps industry leading, modern technology, state of art infrastructure, manufacturing techniques and two decades of complete pump experience.
ATUL has partnership with the industries leaders in submersible pumps for design to help create products for consumer, municipalities and original equipment manufacturers that meet or exceed large market requirements. All ATUL products are backed by trained dealers & supported by factory trained sales engineers team and in house product engineers.