Our Products
Application :These cables can be used for wiring of electrical control panels, industrial sheds, buildings etc. The multi strand flexible conductors make it ideal for concealed wiring. | |||
Features :Manufactured from bright annealed 99.97% pure bare copper conductors that offer low conductor resistance, they result in lower heating thereby increase in life and savings in power consumption. These wires are insulated with a special grade PVC compound formulated and manufactured in-house. The skin colouration offers high insulation resistance and long life.These wires have high thermal stability which inturn results into long life. These wires conforms to IS 694:1990 and also have FIA/TAC (Fire Insurance/Tariff Advisory Committee) approval. |
Application :This is a premium product of electrical wires from Finolex. These cables are ideal for wiring of electrical control panels, industrial sheds, buildings etc., where increased fire safety is desired. During a fire these cables not only emit less smoke and toxic hydrochloric acid gas but also retard the spread of fire enabling those trapped inside buildings / sheds to escape safely. | |||
Features :Manufactured from bright annealed 99.97% pure bare copper conductors these cables have low conductor resistance resulting in power saving. These wires are insulated with a special grade PVC compound formulated and manufactured in-house. The insulation is far superior in terms of critical oxygen and temperature index and also in light transmission and acid gas generation.These wires conforms to IS 694:1990 and also have FIA/TAC (Fire Insurance/Tariff Advisory Committee) approval. |
PVC Single Core & Multicore Flexible Industrial Cables | |||
Application :These single core cables have higher flexibility due to larger number of strands in the conductors and are used for wiring of control panels, machines and various electrical installations in small, medium and large industries where bending radius is less. | |||
Features :Manufactured from bright-annealed 99.97% pure bare copper conductors, these cables have low conductor resistance. These wires are insulated with a special grade PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids, etc. and are tough to protect from any mechanical abuses. These wires conforms to IS 694 : 1990 |
PVC insulated Winding Wires for Submersible Pump Motors | |||
Application :PVC insulated winding wires are used as original equipment for winding of submersible pump motors. They are also used for rewinding of these motors. The special purpose PVC insulation enables these wires to operate under water over long periods. The minimum insulation thickness is achieved through precision extrusion process so that insertion in stator slots is smooth and easy. Finolex has also developed higher sizes with multi strand copper conductors for higher HP Pump motors for specialized applications such as de-watering, mining and naval pumps. | |||
Features :The conductor is solid/stranded and is manufactured from bright-annealed 99.97% pure bare copper which offers low conductor resistance. These wires are insulated with a special tough grade PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids etc. These wires are extruded on state of the art machines for concentric insulation. Each coil is put through quality checks and water immersion test for trouble free marathon performance. These wires conform to IS 8783 (Part 4 / Sec 1): 1995 and have lower overall diameter. | |||
Thin Wall Polymer Insulated Winding Wires for Submersible Pump Motors | |||
Application :These winding wires have very thin insulation thickness which makes them useful in smaller submersible pumps such as V4 pumps. The old pumps are to be rewound the stator slots get smaller and they require thinner winding wires. | |||
Features :Made from bright-annealed 99.97% pure bare copper conductors these wires have low conductor resistance and hence high flux capacity. The thin insulation thickness is achieved through precision extrusion of specially developed and manufactured polymeric compound. Each coil is put through quality checks and water immersion test for trouble free marathon performance. |
Application :Finolex manufacture Battery cable harnesses with lugs soldered / crimped for ready use by automobile manufacturers. These battery cables also find their application in telecommunications, power, computer back upwhere the DC voltage does not exceed 100 V. | |||
Features :Manufactured from bright annealed 99.97% pure bare copper conductors, which offer low conductor resistance. These cables are insulated with a special grade PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids etc.These cables conforms to IS 2465.These cables are long lasting and ensure proper distribution of power in the vehicle. |
1050C Temperature resistant PVC Insulated Thin Wall Auto Cables | |||
Application :These cables are used as original equipment for wiring in new generation automobiles. In modern automobiles the focus is on miniaturization and optimization of available space which results in increase in temperature in the engine compartment and other locations. These cables are therefore manufactured with thin wall insulation with higher temperature withstanding capacity. | |||
Features :Manufactured from bright-annealed 99.97% pure bare copper conductors, they offer low conductor resistance. These cables are insulated with a special grade high temperature PVC compound formulated and manufactured in-house which is impervious to water, oil, grease, acids etc. These cables conform to German standards viz. DIN 72551 Part 6 and have lower overall diameter as compared to normal auto cables. These cables can operate under extreme climatic conditions i.e., from 40C to 105C, which make them popular worldwide. These cables are abrasion resistant and are designed to meet the stringent environmental norms in European Countries. |
Application :These cables are used for transmission of Video and Audio signals and are used in DTH / CATV Industry. The number of CATV channels increasing by the day. These cables are ideal for such multi channel applications. The central conductor is made of solid copper, which makes it ideal for power pass application. | |||
Features :Central conductor is made of 99.97 % pure solid copper manufactured in house. It is insulated with Nitrogen gas injected physical foam dielectric manufactured from imported polyethylene, which enhances the foaming upto 70%, which leads to lower and uniform attenuation. This also ensures that the insulation is free from impurities and the foam cell structure is uniform across entire length. The secondary conductor is made of specially designed poly-aluminum tape bonded with sufficient overlap on dielectric. The second shield is of imported aluminum alloy wire braiding with high tensile strength and has more than 60% coverage suitably flooded with jelly so that the weather effect on conductors is negligible. The outer jacket that has specially formulated PVC manufactured in-house, is of UV resistant nature, for robust performance and long life. Each coil/ bobbin is tested on computerized Test equipment for Attenuation, Impendence and SRL upto 1GHz. | |||
The special features make these cables ideal for power pass application with notch free low attenuation values over wide band of frequencies and low loss of signal qualit |
Application :Finolex switch board cables are best suited for all telephone switch board applications in high rise buildings, offices, factories, hotels, hospitals, residential complexes etc. They generally conform to the ITD specifications G/W1R- 06/02May97 and Finolex specifications and are ideally designed to minimize cross talk. | |||
Features :The conductor is made of electrolytic grade, bright annealed bare solid copper conductor of 0.45/ 0.5 mm diameter and is insulated with a special grade polyethylene compound on the latest state-of-the-art extruders. The cores are twisted together with a uniform lay on a special purpose imported machine, according to the color code to form pairs. The pairs are bunched together in such a manner so as to minimize cross talk. The cable is then jacketed with a specially formulated PVC compound with fire retarding properties. A nylon rip cord provides an effective means of slitting the jacket without damaging the insulation. These are ideal because of low attenuation and low cross talk. Available in standard pack of 100 M and 500 M | |||
Application :This is a premium product of electrical wires from Finolex. These cables are ideal for wiring in residential and commercial complexes, high-rise buildings, hotels, hospitals, multiplex, schools, colleges etc where density of people is high. During a fire these cables not only emit less smoke and toxic hydrochloric acid gas but also retard the spread of fire enabling those trapped inside to escape safely. | |||
Features :Manufactured from bright annealed 99.97% pure bare copper conductors these cables have low conductor resistance resulting in power saving. These wires are insulated with a special grade PVC compound formulated and manufactured in-house.This Heat Resistant FR PVC compound has a high oxygen and temperature index. This property helps in restricting the spread of fire even at very high temperatures. This special compound also offers high insulation resistance and dielectric strength. The insulation is far superior in terms of critical oxygen and temperature index and also in light transmission and acid gas generation.These wires conforms to IS 694:1990 and also have FIA/TAC (Fire Insurance/Tariff Advisory Committee) approval. | |||