My ExportersIndia

For Buyer

For Seller

For Help

Gas Plants

Our Complete range of products are PSA Nitrogen Gas Plant, PSA Oxygen Gas Plant, Gas Generation Plant, Nitrogen Gas Generation Plant and Nitrogen Gas Plant.

PSA Nitrogen Gas Plant

Pressure Swing Adsorption (PSA) is a technology used to separate some gas species from a mixture of gases under pressure according to the species' molecular characteristics and affinity for an adsorbent material. It operates at near-ambient temperatures and so differs from cryogenic distillation techniques of gas separation. Special adsorptive materials (e.g., zeolites) are used as a molecular sieve, preferentially adsorbing the target gas species at high pressure. The process then swings to low pressure to desorb the adsorbent material. In Oxygen Gas Generators, We use Zeolite Molecular Sieves (ZMS) as an adsorbent.
View Complete Details

PSA Oxygen Gas Plant

The process of producing oxygen from oxygen plant involves taking air from an air compressor, separating oxygen from nitrogen and other gases by means of special Zeolite Molecular Sieves. The system gives a continuous supply of oxygen by automatic switching towers on a timed cycle. It can be adjusted for a oxygen purity up to 94%, although the most economical for practical purposes is 85%. In the process of regeneration, the adsorbed nitrogen is subsequently discharged as waste. The resulting product gas is around 85 to 94% pure oxygen available at around 2.5 kgcm2g pressure. The gas is very dry containing little or no moisture.
View Complete Details

Gas Generation Plant

Process StepsSafety Features And Audio Visual Alarms
Basic Principle: Atmospheric Air Contains 78% of Nitrogen and 21% of Oxygen. Oxygen in VPSA method is generated by Physical separation of Oxygen from Atmospheric air. This is done by using a special Molecular sieves which have selective adsorption affinity for adsorption of Nitrogen and let the Oxygen go out. This phenomenon of adsorption of Nitrogen gas under Vacuum/pressure is known as Vacuum Pressure Swing Adsorption i.e. V. P. S. A.
1. The clean filtered air by blower is allowed to pass through the CW/CHW Cooler to VPSA module. In VPSA module the air entering one of the tower is allowed to pass through the bad of molecular sieve, This adsorption continues for a given time, After a the tower get saturated with nitrogen and thus the tower is switched automatically to other tower for nitrogen adsorption and oxygen generation. The previous tower which is saturated with nitrogen is thus allowed to vent out the nitrogen to atmosphere then create vacuum by vacuum pump system.
2. This process is cyclic and you get a regular supply of oxygen from either of the tower which is collected in the surge vessel.
3. The oxygen is analyzed for its purity of oxygen ( & Moisture also if opted for as dew point measurement is optional ) by an online oxygen analyzer
4. In case the oxygen is grater then desired quality it is then allowed to go to storage tank.
5. The system is provided with vent valves which do-not allow the nitrogen of unwanted quality to go for storage and thus use. It let the impure oxygen vent out till the desired purity is achieved.
The Oxygen Gas Generator is Skid Mounted and Pre- commissioned at Our Works. It is fully automatic and virtually requires no attention of the Operator. Once started it can be left-unattended. All operations take place automatically and Oxygen Purity remains very consistent. In case of any abnormality the gas Generator would trip automatically with Audio Visual Alarms for Necessary action.
View Complete Details

Nitrogen Gas Generation Plant

Pressure Swing Adsorption(PSA) is a technology used to separate some gas species from a mixture of gases under pressure according to the species' molecular characteristics and affinity for anadsorbentmaterial. It operates at near-ambient temperatures and so differs fromcryogenic distillation techniques of gas separation. Special adsorptive materials (e.g., zeolites) are used as amolecular sieve, preferentially adsorbing the target gas species at high pressure. The process then swings to low pressure to desorb the adsorbent material. In Oxygen Gas Generators, We use Zeolite Molecular Sieves (ZMS) as an adsorbent.

Key Features
  • Automatic Operation
  • Generates Oxygen as and when required
  • Easy to install and maintain
  • Demonstrated Technology
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us