Verified
Add Review
Our Products
Sugar
2 Products availableRice
1 Products availableDry Fruits & Nuts
1 Products availableFerrous Metal Scrap
1 Products availableStorage Drums, Tanks & Containers
1 Products availableDetergent Raw Materials
1 Products availableWe are leaders in the market for providing best range of OCMA DFCP 4 Grade Bentonite Powder, 6 or 11 OCMA Grade Bentonite Powder, 10 or 13 Non Treated Bentonite Grade Powder, Attapulgite and Barite
The OCMA DFCP 4 Grade Bentonite Powder, offered by us, is a high grade bentonite specially selected and conditioned to meet the API 13A Section : 11 and the former OCMA DFCP-4 specifications, the purity of its basic mineral and its high montmorillonite content give a good stability to all the drilling fluids produced with API 13A section : 11. We are a distinguished OCMA DFCP 4 Grade Bentonite Powder (API 13A Section) in India.
Physical Analysis
| Properties | Protocol | Unit | Required |
|---|---|---|---|
| Yield | OCMA DFCP-4 | bbls/2000lbs | 90 min |
| A.P.I. Filterate Loss |
OCMA DFCP-4 | ml % by weight | 15.0 max |
| Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 |
% by weight | 15.0 max |
| Dry Screen Analysis 100 Mesh Sieve |
OCMA DFCP-4 | % by weight | 98.0 min |
| Wet Screen Analysis 200 Mesh Sieve residue |
OCMA DFCP-4 | % by weight | 2.5 max |
The 6 or 11 OCMA Grade Bentonite Powder, offered by us, is montmorillonite-based clay which, by nature of its source, cannot meet all aspects of clauses9. This 6 or 11 OCMA Grade Bentonite Powder may have been treated with soda ash, polymer or other chemicals to improve suspension property. We are a well-known 6 or 11 OCMA Grade Bentonite Powder (API 13A Section) Manufacturer, Exporter & Supplier in India.
Physical Analysis
| Properties | Protocol | Unit | Required |
|---|---|---|---|
| Viscometer Dial Reading at 600 rpm |
API Spec. 13A:2004/ ISO 13500: 1998 |
r/min | 30 |
| Yield Point / Plastic Viscosity Ratio |
API Spec. 13A:2004/ ISO 13500: 1998 |
- | 6 Max |
| Filterate Volume | API Spec. 13A:2004/ ISO 13500: 1998 |
ML | 16 Max |
| Moisture Content | API Spec. 13A:2004/ ISO 13500: 1998 |
% by weight |
13.0 max. |
| Dry Screen Analysis(Residue Greater than 75 Microns)% |
API Spec. 13A:2004/ ISO 13500: 1998 |
% by weight |
2.5 max. |
The 10 or 13 Non Treated Bentonite Grade Powder, offered by us, is composed principally of the mineral smectite, is dried and ground, but not chemically treated. It can also contain accessory minerals, such as quartz, mica, feldspar and calcite. We are a major 10 or 13 Non Treated Bentonite Grade Powder (API 13A Section) Manufacturer, Exporter & Supplier in India.
Physical Analysis
| Properties | Protocol | Unit | Required |
|---|---|---|---|
| Yield Piont / Plastic Viscosity Ratio | API Spec. 13A:2004/ ISO 13500: 1998 | ------ | Max. 1,5 |
| Dispersed plastic Viscosity | API Spec. 13A:2004/ ISO 13500: 1998 | milliPas.-sec | Min 10 |
| Dispersed Filtrate Volume | API Spec. 13A:2004/ ISO 13500: 1998 | Millilitres | Max.12,5 |
Mandvi, Kutch, Gujarat 
