Atlas Machines India

Fort, Mumbai, Maharashtra

A Simple robust and semi AUTOMATIC POWER OPERATED PIPE BENDING MACHINE Suitable for fabrication work required in various industries. Also pipe in manufacturing pipe furniture & Scooter, Motorcycles and Moped Accessories. The machine is driven by 2 H.P. Motor through a Redicon reduction gearbox & can bend pipe to various angle Bending capacity up to 1.1/4" Diametar & Swg. The machine is easy to set and operate. The operation is fully automatic and is precisely controlled by electrical relays. As soon as operation is over the machine comes back to the original position for reloading and hence is safe to operate.

Size 5/8" to 1". Complete with Std. formers of 5/8", 3/4", 1"

Mechanical degree type pipe bending machine. Size 5/8" to 1.1/4" complete with Std. formers of 5/8", 3/4", 1"and 1.1/ 4" and degree setting arrangement

Conduit Pipe Bending Machine for 14 to 24 Gauge Aluminium Copper & Steel Pipes complete with formers of 58", 34" & 1" or any three formers up to 1".(We can arrange to supply formers in sizes of your requirement up to 1.14")

Heavy Duty Bolt Threading Machine 12" to 2.12", 2.12" to 4", 2.12" to 6", Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to form the basic fundamentals of correct threadings. All the gears are made of case hardened steel with extra large face width and tooth thickness and cut on hobbing machine for noiseless operation even at high speeds. Naturally they are built with high standards of workmanship, material and quality.

Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to form the basic fundamentals of correct threadings. All the gears are made of case hardened steel with extra large face width and tooth thickness and cut on hobbing machine for noiseless operation even at high speeds. Naturally they are built with high standards of workmanship, material and quality. Headstock : The Headstock is of top quality casting proving support to the spindle bearings. The spindle swing or taper roller bearings are of best steel with a grounded finish to give accurate results. Gears of Head Stock are running in Oil Bath with Oil level window.

The Bed : The Bed is pillar type having two pillars made of best steel, nicely grounded and also aligned accurately to the headstock alignment. The Saddle: The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the head stock alignmernt. The Apron : The Apron gives movement to the Saddle with head transfer along with pillars through steel rack and pi8nion arrangements. Its all gears are made of best steel. Vice Jaws : The Vice Jaws are fitted on the saddle with V-ways accurately. The jaws are made of best steel and are well hardened. The movements of jaws are controlled by a screw on the saddle. Lead Screw : The lead screw attachment is an extra device which has been arranged to support thethread cutting chassers in big threading machines, only having eleven TPI range.

Model Z1T-B2-50 Size 12" - 2" Dies Chasers 12" - 34" , 1' -2 " BSP or NPT Dies Head Automatic - opening Dies HeadVoltage 110V220V240V 1-Phase220V380V415V 3-PhaseMotorpower 750WPindle Speed 28rmin G.WN.W. 86kg 68kgPacking Size 710 X 455 X 520

we are offering hand opearted pipe bender machine

.

The thread rolling is basically a cold-forging process that forms the entire length of an external thread by displacing the bla^E. material. Threads are produced on the blanks of predetermined diameter by a rolling action under pressure and between two rotating cylindrical steel roll dies whose working faces are suitably threaded. This action plastically deforms the blank in such a manner that a portion of the blank metal is displaced to form the root of the thread and raised in unbroken fibw-flow lines to form the crest of the thread. The roll dies rotate synchronously on parallel or slightly tilted horizontal spindle shafts that are adjustable by sliding laterally. The dies are made of special steel alloy with an exceptional hardness and toughness resulting in maximum wear resistance. The blank is placed on a carbide tipped work rest blade or center support disposed between the dies and after a complete cycle v of approach, rolling and release of the hydraulically operated right hand spindle shaft the rolled thread is removed. The blank is placed in the rolling position, either by hand or automatically. A timer built into the machine release the hydraulic pressure on the roll dies when the required diameter is completed and returns the right hand spindle head to its starting position.

Conduit Pipe Bending Machine for 14 to 24 Gauge Aluminium Copper & Steel Pipes complete with formers of 5/8", 3/4" & 1" or any three formers up to 1".(We can arrange to supply formers in sizes of your requirement up to 1.1/4")