Atlas Machines India

Fort, Mumbai, Maharashtra

The Universal Tool & Cutter Grinder is a robust machine capable of dealing with a wide range of tool & cutter Grinder operations. It is available as a steel cabinet mounted, machine and is designed for the rapid sharpening of H.S.S. milling cutters, spiral mills, metal slitting saws side and face cutters reamers, tap and with suitable attachments lathe tools, end mills formed cutters etc. A totally enclosed wheel head motor with a double ended spindle carriers one standard and one extended wheel adaptor which can be mounted on either end and will receive both the Cup and dish wheels supplied with the machine. The spindle, with runs at 2800 r.p.m. is controlled by reversing switch built into the main body of the machine. The wheel head is mounted on an engraved base plate which can swivel through 360D and can be clamped in any position. It is supported by a cast iron column having vertical adjustment, by means of a hand-wheel at the base of the machine. The column can be looked in any position and movement can be accurately controlled by means of a friction mounted micrometer dial. The upper work table is provided with the slot which not only serves as means of fixing the tooth rest etc. but also enables accurate location of the loose centre heads. It is graduated either side of the Zero setting and can swivel through 180D Provision is also made for taper setting in INCHES per FOOT. Longitudinal movement of the table is obtained from a rack pinion operated by a conveniently placed Handle or, if required, can be operated by hand pressure only. The table is located on accurately machined vee and flat ways and is fitted with adjustable stops which can limit he movement of the table in and position. Cross traverse is accurately controlled by a hand wheel situated at the front of the machine which is fitted with a friction mounted micrometer dial.

extremely robust in design, suitable for all heavy duty jobs in modern foundries, factories and engineering workshops. Pedestal body - made of heavy duty selected cast iron with attracting appearance, inherent features of design, quality of material and methods of modern manufacturing techniques combine to ensure maximum strength, accuracy and reliability with motor enclosed in the body which is readily accessible. Spindle - is of large diameter, mounted on heavy duty ball bearings. The spindle bearings and motor bearings are greased adequately before despatch and need only replenishing at intervals. Grinding wheels - coarsemediumfine of carborundum or grindwell make.

WHEEL FLANGES - Wheel flanges are of balanced design, the inner pair keyed to the spindle for positive drive for 18" to 40 " grinders. TOOL RESTS - These are adjustable both in horizontal and vertical positions for allowing maximum wear and tear of the wheels. DRIVE - Through V-belts to the spindle by an Electric Motor. Two speeds are provided to maintain peripheral speeds when the wheels wear out. ELECTRICALS - 400/440 volts 3 phase 50 cycles ISI Mark Electric Motor with LT/LK/BETEX Push button starter direct on line with overload, undervoltage.

SPECIAL ACCESSORIES AT EXTRA COST: Coolant equipment, Twist drill Grinding Attachment, Dust Exhaust Equipment, Machine Light, Water Pot and Foundation Nuts & Bolts.

The Universal Tool & Cutter Grinder is a robust machine capable of dealing with a wide range of tool & cutter Grinder operations. It is available as a steel cabinet mounted, machine and is designed for the rapid sharpening of H.S.S. milling cutters, spiral mills, metal slitting saws side and face cutters reamers, tap and with suitable attachments lathe tools, end mills formed cutters etc. A totally enclosed wheel head motor with a double ended spindle carriers one standard and one extended wheel adaptor which can be mounted on either end and will receive both the Cup and dish wheels supplied with the machine. The spindle, with runs at 2800 r.p.m. is controlled by reversing switch built into the main body of the machine. The wheel head is mounted on an engraved base plate which can swivel through 360D and can be clamped in any position. It is supported by a cast iron column having vertical adjustment, by means of a hand-wheel at the base of the machine. The column can be looked in any position and movement can be accurately controlled by means of a friction mounted micrometer dial.

The upper work table is provided with the slot which not only serves as means of fixing the tooth rest etc. but also enables accurate location of the loose centre heads. It is graduated either side of the Zero setting and can swivel through 180D Provision is also made for taper setting in INCHES per FOOT. Longitudinal movement of the table is obtained from a rack pinion operated by a conveniently placed Handle or, if required, can be operated by hand pressure only. The table is located on accurately machined vee and flat ways and is fitted with adjustable stops which can limit he movement of the table in and position. Cross traverse is accurately controlled by a hand wheel situated at the front of the machine which is fitted with a friction mounted micrometer dial.

STANDARD EQUIPMENTS

• Universal Work Head
• Indexing Tooth Rest
• Set of Centre Heads
• Hilder for Diamond Dresser
• Reversing Switch
• 3 dia. Electric Motor

STANDARD EQUIPMENTS

• Hob Grinding Attachment
• Drill Grinding Attachment
• Radius Grinding Attachment
• Chaser Grinding Attachment
• Tap Lead Grinding Attachment

TOOL KIT

• Panel Lock Key
• L-Keys 5/32" & 3/16"
• Adaptor Puller
• Pressure Oil Can
• Double Ended Spanner
• Adaptor Nut Box Spanner
• Cup Shaped Grinding Wheel 4" x 2", 1" Bore
• Dish Shaped Grinding Wheel 6" x 1/2", 1" Bore