Astric Industries

Kapodra Patiya, Surat, Gujarat

• Brand NameAstric Industries
• MaterialA-STARK,A-STARK
• ColorGrey,grey
• TypeFoam Adhesive
• Country of OriginIndia

A high-performance polymer-based adhesive to be mixed with water installing wall-small & floor-medium format ceramic tiles, vitrified tiles.   APPLICATION Designed for interior floor & wall areas.   ADVANTAGES ⦁ For fixing ceramic, vitrified tiles & natural stone on interior flooring ⦁ Ideal for tile-on-tile & new flooring  ⦁ High bond strength  ⦁ Single component -Just add water   Installation Guide for ASTRIC™ A-STARK   Surface Preparation:   ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds.   ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ A-STARK.   ⦁ Dry, dusty concrete or masonry surfaces should be moistened, and any excess water should be removed. You can install it on a damp surface. New concrete slabs need to be damp-cured and must be 28 days old before applying.      Material Preparation & Application:   Mixing Procedure:   ⦁ Place clean, potable water into a clean mixing bowl. Add ASTRIC™ A-STARK Super Flex powder. Use approximately 5.5–6 L of water for 20 kg of powder. Mix with a low-speed paddle drill to achieve a smooth, paste-like consistency. Let the mixture stand for 5-10 minutes, then stir again before use. Stir occasionally without adding more water. Properly mixed, troweled ridges should stand without slump.     Mixing Ratios:   ⦁Mix 5.5-6 L of clean water with a 20 kg bag of mortar.

• Brand NameAstric Industries
• TypeFoam Adhesive
• MaterialASTASHEEL+
• Colorgrey
• Country of OriginIndia
• NameASTRIC™ ASTASHEEL+

A multipurpose high polymer modified adhesive for interior and exterior installation of ceramic tiles, stone, quarry tiles, glass mosaic tiles, pavers and bricks ASTRIC "ASTASHEEL+" Multipurpose Floor and Wall Tile Adhesive is designed to mix with water and has a convenient open time with high adhesion & workability.   APPLICATION Designed for exterior and underwater applications, large size of vitrified tiles and natural stones, superior bond to concrete, cement renders, screeds.   ADVANTAGES ⦁ For fixing tiles & stone on demanding external & internal  application ⦁ High Performance in all types of weather ⦁ Single component just add water ⦁ Polymer-modified adhesive: Flexible and strong bond. Coverage Details (per 20kg bag:) Packaging: 20 kg Colour: Grey & White Installation Guide for ASTRIC™ ASTASHEEL+ To achieve a successful installation of very large format/thin tiles, follow these recommendations: ⦁ Proper surface preparation ⦁ Proper material mixing & application ⦁ Use of an edge-leveling system ⦁ Beating of the tile into the mortar bed using a rubber mallet Surface Preparation: ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds. ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ ASTASHEEL+. Bonding to Cutback Adhesive: ⦁ Remove hardened adhesive parts, as they reduce mortar bond strength. Never use adhesive removers or solvents, as they may soften the adhesive and cause it to penetrate the concrete. Adhesive residue must be wet scraped to the finished surface of the concrete. Perform a test bond area before starting the installation process. Material Preparation & Application: Mixing Procedure: ⦁ Place clean, potable water into a clean mixing bowl. Add ASTRIC™ ASTASUN Super Flex powder. Use approximately 5.5–6 L of water for 20 kg of powder. Mix with a low-speed paddle drill to achieve a smooth, paste-like consistency. Let the mixture stand for 5-10 minutes, then stir again before use. Stir occasionally without adding more water. Properly mixed, troweled ridges should stand without slump. Mixing Ratios: ⦁ Mix 5.5-6 L of clean water with a 20 kg bag of mortar.

• Brand NameAstric Industries
• TypeFoam Adhesive
• MaterialASTABLISS
• Colorgrey
• Country of OriginIndia
• Product NameASTRIC™ ASTABLISS

A multipurpose, high polymer modified powder offering vast utility including applications for floor & wall in interior & exterior areas. It is a cementitious thin-set powder to be mixed only with water to install various types of medium format tiles & stone on a variety of substrates.   APPLICATION Designed specially for interiors floor & wall installations of all types of ceramic tiles, vitrified tiles, semi- vitrified tiles, glass mosaic tiles, precast terrazzo and natural stones over concrete and a variety of substrates. ADVANTAGES ⦁ For fixing tiles & natural stone on interior floor & wall. ⦁ Single component – Just add water ⦁ Water & Shock Resistant  ⦁ Polymer-modified Bonds with various substrates.  Coverage Details (per 20kg bag:) Packaging: 20 kg Colour: Grey & White Installation Guide for ASTRIC™ ASTABLISS To achieve a successful installation of very large format/thin tiles, follow these recommendations: ⦁ Proper surface preparation ⦁ Proper material mixing & application ⦁ Use of an edge-leveling system ⦁ Beating of the tile into the mortar bed using a rubber mallet Surface Preparation: ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds. ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ ASTABLISS. ⦁ Dry, dusty concrete or masonry surfaces should be moistened, and any excess water should be removed. You can install on a damp surface. New concrete slabs need to be damp-cured and must be 28 days old before applying.  Material Preparation & Application: Mixing Procedure: ⦁ Place clean, potable water into a clean mixing bowl. Add ASTRIC™ ASTASUN Super Flex powder. Use approximately 5.5–6 L of water for 20 kg of powder. Mix with a low-speed paddle drill to achieve a smooth, paste-like consistency. Let the mixture stand for 5-10 minutes, then stir again before use. Stir occasionally without adding more water. Properly mixed, troweled ridges should stand without slump. Mixing Ratios: ⦁ Mix 5.5-6 L of clean water with a 20 kg bag of mortar.

• MaterialASTASUN
• Brand NameAstric Industries
• Colorgrey
• TypeFoam Adhesive
• Country of OriginIndia
• Product NameASTRIC ASTASUN

A highly polymer-modified and highly flexible adhesive for installation of large format/slim tiles on most of the substrates to accommodate movements, It offers very good handling properties with good sag and slump resistance while doing Installation on wall or floor respectively. It can be applied up to 15 mm bed thickness.   APPLICATION Designed especially for interior and exterior floor and wall installations of all types of ceramic tile. vitreous, semi- vitreous tile, paper faced glass mosaic tiles, precast terrazzo and (ALL SIZE) natural stones over concrete and on a variety of substrates. Good underwater shear bond allows this product to be used for wet areas like swimming pools, sauna. water bodies and washrooms. Can be used for tile on tile applications and as slurry bond adhesive in wet on wet applications   ADVANTAGES ⦁ For fixing extra large format tiles & thin body tiles, natural granite & marble stone on demanding internal & external applications. ⦁ Non-slump adhesive with a bed thickness up to 15mm  ⦁ Cream & non sag formula for easier installation on floor and wall. ⦁ Highly flexible, lightweight formula. More than 15% higher coverage than standard adhesive.   Installation Guide for ASTRIC™ ASTASUN To achieve a successful installation of very large format/thin tiles, follow these recommendations: ⦁ Proper surface preparation ⦁ Proper material mixing & application ⦁ Use of an edge-leveling system ⦁ Beating of the tile into the mortar bed using a rubber mallet Surface Preparation: ⦁ Ensure all surfaces are structurally sound, clean, and free of dirt, oil, grease, loose paint, laitance, concrete sealers, or curing compounds. ⦁ Proper surface preparation is crucial. Remove any demolding wax powder from the back surface of the tile. If a fiber mesh is present on the back surface, ensure it is completely removed before proceeding with the installation using ASTRIC™ ASTASUN.