Matched Pair bearings are Angular contact ball bearings that are suitable for applications that require high accuracy and high-speed performance. Bearings with a smaller contact angle are more suitable for high-speed rotation; those with a larger contact angle are more suitable for high load applications. Angular contact ball bearings are often preloaded to enhance their rigidity and rotating performance. For high-precision matched pair angular contact ball bearings of class 5 or higher, which are used in machine tools and other precision equipment, the standard preload is specified in three levels: light, medium, and heavy. Two bearings are used together facing one another or two or more bearings are matched and used.

andem arrangementA tandem arrangement is used when the load carrying capacity of a single bearing is inadequate. When arranged in tandem, the load lines are parallel and the radial and axial loads are equally shared by the bearings. Axial loads in both directions can be accommodated.

Back-to-back arrangementMounting two bearings back-to-back provides a relatively stiff bearing arrangement, which can also accommodate tilting moments. When arranged back-to-back, the load lines diverge towards the bearing axis. Axial loads in both directions can be accommodated, but only by one bearing in each direction.

Face-to-face arrangementMounting two bearings face-to-face is not as stiff as a back-to-back arrangement, but less sensitive to misalignment. When arranged face-to-face, the load lines converge towards the bearing axis. Axial loads in both directions can be accommodated, but only by one bearing in each direction.

"V-shaped" markingA "V-shaped" marking on the outside surface of the outer rings of matched bearings (fig. 5) indicates how the set should be mounted to obtain it's desired performance . The bearing pairs are supplied as a packaged unit.

We are one of the leading suppliers of Slewing Ring Bearings that is available in ball and roller types. These bearings are extensively used where a rotary motion is required without transmission of high radial load, rotation at slow speed and little rough application.

The Ball Type has double row ball bearing slewing rings with double axis system and single row ball bearing slewing ring with four-point contact. In case of the Roller Bearing design, three roller bearing slewing rings with radial & axial roller type are applied. We can provide our clients with wide range, having up to 3500 mms external diameter with either internal teeth or external teeth cut or without any teeth. For pre-lubricated condition with grease nipples, high quality dust seals and standardized clamping bolt pattern the complete bearing is provided.
These bearings give a normal life of 30000 revolutions on load. The selection of type of rolling element either roller or ball and the number of rows, entirely depends on application and method of use, such as slewing over angle, operating cycle and oscillatory motion. Our Slewing Bearing Rings find wide application in wind turbine, turntable, mobile carne, excavator, port carne, turn dish rotation in steel industry and work platform.

Features:- High operational efficiency- Compact design- Long service life- Low maintenance

Applications- Transmissions, transfer cases, engines & valve trains- Steering and braking systems- Axle support- Outboard engines

Expanded Options- Assemblies with bearings.- Engineered polymer cages- Bearings with one or two seals- Closed end bearings- Oil holes- Drawn sleeve

Types of Needle Roller Bearings

• Drawn cup needle roller bearings:These needle roller bearings have a deep thin walled outer ring with open or closed ends. These bearings have a very low sectional height and have high load carrying capacity. They are used when a very compact arrangement is required and the housing bore cannot be used as a raceway. These drawn cup needle roller bearings are directly used on the shaft.
• Drawn cup needle roller bearings with closed ends:These drawn cup are manufactured of hardened steel sheet, needle roller and cage assembly form a non-separable unit. There drawn cup needles have a large lubricant space. Generally, they have only a single row of rollers but some may have two-needle roller and cage assemblies adjacent to each other with the lubricating hole in the outer ring.
• With and without inner rings:These are rubbing of polyurethane or nitride rubber(NBR).Superior quality of lithium base grease is used in them. They are a substitute for seals. The raceways of the shaft must have the hardness and the surface should have a normal finish in order to maximize the load carrying capacity.

Needle Roller Bearings Specifications & Standards

• Dimensions - The boundary dimensions of the drawn cup needle roller bearings are in accordance with ISO
• Bore Size - Its size is measured in millimeters. The bore is a hollow cylindrical chamber or barrel shaped where the metal balls are placed.
• Outer Ring Width - It is the width of the outer ring measured in millimeters.
• Revolutions - Revolutions indicate the rotation speed of the bearing.
• Bearing Weight It indicates the weight of the bearing, measured in pound.
• Tolerance - They are usually meant for normal tolerance but can be enhanced.
• Internal Clearance- A suitable internal clearance is achieved by selecting appropriate tolerance.
• Misalignment - The line contact between the raceways and the rollers prevent damaging edge stresses from occurring & also allows bearings to accommodate very minor angular misalignments of the shaft relative to the housing.
• Cages - There are standard cages but some may

We are one of the leading suppliers of Slewing Ring Bearings that is available in ball and roller types. These bearings are extensively used where a rotary motion is required without transmission of high radial load, rotation at slow speed and little rough application.

The Ball Type has double row ball bearing slewing rings with double axis system and single row ball bearing slewing ring with four-point contact. In case of the Roller Bearing design, three roller bearing slewing rings with radial & axial roller type are applied. We can provide our clients with wide range, having up to 3500 mms external diameter with either internal teeth or external teeth cut or without any teeth. For pre-lubricated condition with grease nipples, high quality dust seals and standardized clamping bolt pattern the complete bearing is provided.

These bearings give a normal life of 30000 revolutions on load. The selection of type of rolling element either roller or ball and the number of rows, entirely depends on application and method of use, such as slewing over angle, operating cycle and oscillatory motion. Our Slewing Bearing Rings find wide application in wind turbine, turntable, mobile carne, excavator, port carne, turn dish rotation in steel industry and work platform.
Features:
- High operational efficiency
- Compact design
- Long service life
- Low maintenance

Our Thrust Ball Bearing comprises of a blowout patch, a seat ring, steel balls and a holder. The thrust bearing is mainly used to carry the axial load. When load is properly applied to this bearing, the internal contact points get aligned on a plane parallel to the shaft. This type of bearing is mainly applied on automotive steering gear and machine tool main shaft. The Thrust Ball Bearing is available in custom designs as per the requirement of the bulk buyers at competitive prices. We offer two types of Thrust Ball Bearing: Single Direction Thrust Ball Bearing and Double Direction Thrust Ball Bearing.

Single Direction Thrust Ball Bearings
We offer single direction thrust ball bearings consisting of one row of balls, which rotate between a housing washer and a shaft washer. They can be mounted separately. Single direction thrust ball bearings can accommodate axial loads and locate shaft axially in one direction. They are not suitable for any radial load. The small series is fitted with a press steel cage. Single direction thrust ball bearings with machined window type cages have suffixed MP (brass) or FP(steel). These bearings are available in various sizes and can be customized as per our bulk buyers requirement.

Double Direction Thrust Ball Bearings
We offer single direction thrust ball bearings consisting of one row of balls, which rotate between a housing washer and a shaft washer. They can be mounted separately. Single direction thrust ball bearings can accommodate axial loads and locate shaft axially in one direction. They are not suitable for any radial load. The small series is fitted with a press steel cage. Single direction thrust ball bearings with machined window type cages have suffixed MP (brass) or FP(steel). These bearings are available in various sizes and can be customized as per our bulk buyers requirement.

Physical Characteristics
- The self-aligning ball bearing has two rows of balls
- A common concave sphere raceway in the outer ring
- The center's curvature meets that of the bearing it self
- The inner ring, balls and cage continue to rotate
- The self-aligning ball bearing has a tapered bore
- It can easily be fit to the shaft with an adapter assembly

Advantages of Self Aligning Ball Bearings
- Lowest friction of all rolling bearings
- Run cooler even at high speeds.
- Easy mounting and dismounting
- Permissible operating speed does not dependent on heat generation or cage stability and strength.

We offer cylindrical roller bearings in superior quality steel. These bearings are used to simplify the process of mounting and dismounting. Our range of cylindrical is separable. These rollers feature a modified line of contact to eliminate edge stressing. They have inner and outer rings that are able to transmit thrust loads in addition to radial loads. The cylindrical bearings are widely used in industries like fertilizer, chemical, automobile etc. They offer durable service and hassle free working. They can be availed in varied dimensions and can also be custom made as per client's requirement.

Industrial Cylindrical Roller Bearing
These cylindrical roller bearings have high load bearing capacity hence they are used for are used for rolling elements. The inner or the outer ribs guides the rollers, therefore these bearings are also suitable for high speed applications. Quality checks on various parameters like strength, grip etc are conducted on each piece ensuring the flawless final product. These cylindrical bearings are available in various dimensions and can also be modified as per our clients. requirements.

Special Cylindrical Roller Bearing
These are special cylindrical roller bearings that are supplyd using special bearing steel SAE 52100. The high quality steel ensures durability, better performance etc. The cylindrical roller bearings are supplyd using the latest technology which enables us to provide bulk buyers cost effective product. These steel bearings can be modified as per the buyers requirement. We provide three types special cylindrical roller bearings One Direction Locating Bearings, Two Direction Locating bearings and Full Complement Roller Bearings.

One Direction Locating Bearings
We offer one direction bearings that have separable outer or inner rings. The single flange of the separable ring prevents the bearing shaft from going in one direction. The double flanged race is guided by the roller guidance. They have a slightly lower limiting speed caused by the flange.

Two Direction Locating Bearings:
We supply two direction locating bearings that have a two piece inner ring or are self contained. These cylindrical bearings have a lower roller capacity but a high load capacity. They are rather complex bearings.

Full Compliment Bearings:
Full-complement Bearings use two snap rings in the non locating race to retain the rollers. These cylindrical bearings have high load capacity but low speed which is a result of the high rubbing velocity between adjacent rollers. This limits the bearings to low speed or oscillatory applications.

Physical Characteristics
A cylindrical shape would add to the stress concentrations at the end of the roller-race contact which results in high wear and high sensitivity to misalignment .Henceforth, they are usually crowned or end relieved.

Application of Cylindrical Roller Bearings
- Power generation
- Oilfield
- Mining and aggregate processing
- Gear drives
- Rolling mills
- Machine tools
- Transmissions
- Vibration machines and as wheel set bearings for rail vehicles.

Types of Cylindrical Roller Bearings
- Single or Double Row Bearings.
- Full Complement Cylindrical Roller Bearings.
- Crossed Cylindrical Roller Bearing.

Single Spherical Roller BearingsWe offer qualitative spherical bearings that have two rows of symmetrical spherical rollers and a common raceway in the outer ring. The bearings supplyd by us are acknowledged in the market for their high load taking capacity and self aligning ability. They have limited speed tolerating capacity and hence they are used in vibrators, shakers, conveyors, speed reducers, transmissions, and other heavy machinery. These spherical bearings are supplyd in varying radial thickness and axial widths to accommodate different loads. They not only can carry radial loads but can also carry axial load in two directions.

Double Row Spherical Roller Bearing
Double Spherical Roller Bearings from us consists of a plain bearing, with a ball pushing, inside a cylindrical housing. These cylindrical housing may have a liner supplyd from different material which minimizes friction or provides self lubrication. For different load capacity and lubrication requirement many balls or linear materials are available. These spherical bearings are maintenance free and are suitable for applications that involve swivel movement, high alternating loads, very high radial loads with a unilateral load direction and high shock loads.

Physical Characteristics
- Large bores
- More contact area
- Inner rings to resist cracking
- Allowance for static or dynamic misalignment
- Expansion capabilities

Pillow block bearings from Associated Enterprises are a blend of simple design and assembly. A pillow bearing has deep groove ball bearing, which is sealed on both sides an a spherical diameter on the outside with housing. The housing is either a casting or a sheet metal stamping. The pillow blocks are used to provide load support for rotating shaft axis. These units are supplied as plummer blocks or flanged housing mountings. The pillow block bearings are resistant to temperatures, dimensionally accurate and have high functionality. They have various applications in material handling, conveyors, packing machinery, shrink wrappers, printing presses etc.

Flanged Pillow Block Bearing
We offer Flanged Pillow Block Bearing covers the current units for metric and inch size shaft. Apart from these, the flanged bearing units are also used as locating bearings. They are best suited for short shaft and in applications where only minor thermal expansions occur. Axial clearance in the bearings absorbs small shaft expansions. The block unit is supplyd from cast iron and the flanged- housing unit is made from the sheet metal.

The small flanged housings are triangular in shape and the larger ones have a square shape. Different types of flanged pillow block bearings are used for mild and harsh conditions.

Industrial Pillow Block Bearing
We offer industrial bearings that are used for self aligning ball bearings and spherical roller bearings. They can also be used as a tapered bores on an adapter sleeve and on smooth shafts. These pillow block bearing are supplyd using gray cast iron and require grease lubrication. They are tested on several parameters for assuring quality standards. The industrial pillow bearings supplyd by us are appreciated for high impact, corrosion resistance and durability standards.

We supply wide range of tapered roller bearings, which consists of components such as cone or inner ring, cup or outer ring, tapered rollers or rolling elements and cage or roller retainer. The taper angles allow the tapered roller bearings to handle a combination of radial and thrust loads. These tapered roller bearings are supplyd using superior grades of steel that ensure durability of the product and hassle free usage. They find varied applications in cars, light and vehicles, agricultural equipment, wheel assembly etc.

Industrial Taper Roller Bearing
We supply Industrial Taper Roller Bearings in superior grades of steel. They can carry combinations of large radial and thrust loads. In the industrial taper roller bearings there is a difference between the inner and outer raceway contact angles, which causes a force component that drives the tapered rollers against the guide flange. The Industrial Taper Roller Bearings are used in the construction machinery, gear, construction, and vehicle supply. These durable industrial taper roller bearings can be customized as per specific requirements of the buyers. They can be availed from us at most competitive prices.

Advantages of Taper roller bearings
- Dimensional Stability
- Long Life Even In Contaminated Lubricant
- Durable Steel Cage
- Dimensionally Interchangeable With Other Bearing supliers

Applications of Taper Roller Bearings
- Car and vehicle wheel bearings
- Agriculture, Construction & Mining Equipment
- Various Axle Systems
- Conveyance Vehicles
- Gear Box, Engine Motors, Reducers

We offetr deep groove ball bearings, capable of operating at high speeds and are widely used radial bearings. These non-separable bearings are available in a wide variety of seal, shield snapring arrangements. It requires little attention or maintenance in service.

Physical characteristics:
- Deep groove ball bearings have deep uninterrupted raceways. This allows them to carry axial loads in both directions at reasonably high speeds.
- The bearing ring grooves are circular arcs made slightly larger than the radius of the ball.
- The balls make point contact with the raceways (elliptical contact when loaded).
- The inner ring shoulders are of equal height (as the outer ring shoulders).

Advantages:
- Can sustain radial, axial, or composite loads.
- Can provide both high-running accuracy and high-speed operation.
- Can take the place of high speed angular contact ball bearings.
- Simple design.
- Maintenance free.
- Longer service life.

Matched Pair bearings are Angular contact ball bearings that are suitable for applications that require high accuracy and high-speed performance. Bearings with a smaller contact angle are more suitable for high-speed rotation; those with a larger contact angle are more suitable for high load applications. Angular contact ball bearings are often preloaded to enhance their rigidity and rotating performance. For high-precision matched pair angular contact ball bearings of class 5 or higher, which are used in machine tools and other precision equipment, the standard preload is specified in three levels: light, medium, and heavy. Two bearings are used together facing one another or two or more bearings are matched and used.

andem arrangementA tandem arrangement is used when the load carrying capacity of a single bearing is inadequate. When arranged in tandem, the load lines are parallel and the radial and axial loads are equally shared by the bearings. Axial loads in both directions can be accommodated.

Back-to-back arrangementMounting two bearings back-to-back provides a relatively stiff bearing arrangement, which can also accommodate tilting moments. When arranged back-to-back, the load lines diverge towards the bearing axis. Axial loads in both directions can be accommodated, but only by one bearing in each direction.

Face-to-face arrangementMounting two bearings face-to-face is not as stiff as a back-to-back arrangement, but less sensitive to misalignment. When arranged face-to-face, the load lines converge towards the bearing axis. Axial loads in both directions can be accommodated, but only by one bearing in each direction.

"V-shaped" markingA "V-shaped" marking on the outside surface of the outer rings of matched bearings (fig. 5) indicates how the set should be mounted to obtain it's desired performance . The bearing pairs are supplied as a packaged unit.

We are one of the leading suppliers of Slewing Ring Bearings that is available in ball and roller types. These bearings are extensively used where a rotary motion is required without transmission of high radial load, rotation at slow speed and little rough application.

The Ball Type has double row ball bearing slewing rings with double axis system and single row ball bearing slewing ring with four-point contact. In case of the Roller Bearing design, three roller bearing slewing rings with radial & axial roller type are applied. We can provide our clients with wide range, having up to 3500 mms external diameter with either internal teeth or external teeth cut or without any teeth. For pre-lubricated condition with grease nipples, high quality dust seals and standardized clamping bolt pattern the complete bearing is provided.
These bearings give a normal life of 30000 revolutions on load. The selection of type of rolling element either roller or ball and the number of rows, entirely depends on application and method of use, such as slewing over angle, operating cycle and oscillatory motion. Our Slewing Bearing Rings find wide application in wind turbine, turntable, mobile carne, excavator, port carne, turn dish rotation in steel industry and work platform.

Features:- High operational efficiency- Compact design- Long service life- Low maintenance

Applications- Transmissions, transfer cases, engines & valve trains- Steering and braking systems- Axle support- Outboard engines

Expanded Options- Assemblies with bearings.- Engineered polymer cages- Bearings with one or two seals- Closed end bearings- Oil holes- Drawn sleeve

Types of Needle Roller Bearings

• Drawn cup needle roller bearings:These needle roller bearings have a deep thin walled outer ring with open or closed ends. These bearings have a very low sectional height and have high load carrying capacity. They are used when a very compact arrangement is required and the housing bore cannot be used as a raceway. These drawn cup needle roller bearings are directly used on the shaft.
• Drawn cup needle roller bearings with closed ends:These drawn cup are manufactured of hardened steel sheet, needle roller and cage assembly form a non-separable unit. There drawn cup needles have a large lubricant space. Generally, they have only a single row of rollers but some may have two-needle roller and cage assemblies adjacent to each other with the lubricating hole in the outer ring.
• With and without inner rings:These are rubbing of polyurethane or nitride rubber(NBR).Superior quality of lithium base grease is used in them. They are a substitute for seals. The raceways of the shaft must have the hardness and the surface should have a normal finish in order to maximize the load carrying capacity.

Needle Roller Bearings Specifications & Standards

• Dimensions - The boundary dimensions of the drawn cup needle roller bearings are in accordance with ISO
• Bore Size - Its size is measured in millimeters. The bore is a hollow cylindrical chamber or barrel shaped where the metal balls are placed.
• Outer Ring Width - It is the width of the outer ring measured in millimeters.
• Revolutions - Revolutions indicate the rotation speed of the bearing.
• Bearing Weight It indicates the weight of the bearing, measured in pound.
• Tolerance - They are usually meant for normal tolerance but can be enhanced.
• Internal Clearance- A suitable internal clearance is achieved by selecting appropriate tolerance.
• Misalignment - The line contact between the raceways and the rollers prevent damaging edge stresses from occurring & also allows bearings to accommodate very minor angular misalignments of the shaft relative to the housing.
• Cages - There are standard cages but some may

We are one of the leading suppliers of Slewing Ring Bearings that is available in ball and roller types. These bearings are extensively used where a rotary motion is required without transmission of high radial load, rotation at slow speed and little rough application.

The Ball Type has double row ball bearing slewing rings with double axis system and single row ball bearing slewing ring with four-point contact. In case of the Roller Bearing design, three roller bearing slewing rings with radial & axial roller type are applied. We can provide our clients with wide range, having up to 3500 mms external diameter with either internal teeth or external teeth cut or without any teeth. For pre-lubricated condition with grease nipples, high quality dust seals and standardized clamping bolt pattern the complete bearing is provided.

These bearings give a normal life of 30000 revolutions on load. The selection of type of rolling element either roller or ball and the number of rows, entirely depends on application and method of use, such as slewing over angle, operating cycle and oscillatory motion. Our Slewing Bearing Rings find wide application in wind turbine, turntable, mobile carne, excavator, port carne, turn dish rotation in steel industry and work platform.
Features:
- High operational efficiency
- Compact design
- Long service life
- Low maintenance

Our Thrust Ball Bearing comprises of a blowout patch, a seat ring, steel balls and a holder. The thrust bearing is mainly used to carry the axial load. When load is properly applied to this bearing, the internal contact points get aligned on a plane parallel to the shaft. This type of bearing is mainly applied on automotive steering gear and machine tool main shaft. The Thrust Ball Bearing is available in custom designs as per the requirement of the bulk buyers at competitive prices. We offer two types of Thrust Ball Bearing: Single Direction Thrust Ball Bearing and Double Direction Thrust Ball Bearing.

Single Direction Thrust Ball Bearings
We offer single direction thrust ball bearings consisting of one row of balls, which rotate between a housing washer and a shaft washer. They can be mounted separately. Single direction thrust ball bearings can accommodate axial loads and locate shaft axially in one direction. They are not suitable for any radial load. The small series is fitted with a press steel cage. Single direction thrust ball bearings with machined window type cages have suffixed MP (brass) or FP(steel). These bearings are available in various sizes and can be customized as per our bulk buyers requirement.

Double Direction Thrust Ball Bearings
We offer single direction thrust ball bearings consisting of one row of balls, which rotate between a housing washer and a shaft washer. They can be mounted separately. Single direction thrust ball bearings can accommodate axial loads and locate shaft axially in one direction. They are not suitable for any radial load. The small series is fitted with a press steel cage. Single direction thrust ball bearings with machined window type cages have suffixed MP (brass) or FP(steel). These bearings are available in various sizes and can be customized as per our bulk buyers requirement.

Physical Characteristics
- The self-aligning ball bearing has two rows of balls
- A common concave sphere raceway in the outer ring
- The center's curvature meets that of the bearing it self
- The inner ring, balls and cage continue to rotate
- The self-aligning ball bearing has a tapered bore
- It can easily be fit to the shaft with an adapter assembly

Advantages of Self Aligning Ball Bearings
- Lowest friction of all rolling bearings
- Run cooler even at high speeds.
- Easy mounting and dismounting
- Permissible operating speed does not dependent on heat generation or cage stability and strength.

We offer cylindrical roller bearings in superior quality steel. These bearings are used to simplify the process of mounting and dismounting. Our range of cylindrical is separable. These rollers feature a modified line of contact to eliminate edge stressing. They have inner and outer rings that are able to transmit thrust loads in addition to radial loads. The cylindrical bearings are widely used in industries like fertilizer, chemical, automobile etc. They offer durable service and hassle free working. They can be availed in varied dimensions and can also be custom made as per client's requirement.

Industrial Cylindrical Roller Bearing
These cylindrical roller bearings have high load bearing capacity hence they are used for are used for rolling elements. The inner or the outer ribs guides the rollers, therefore these bearings are also suitable for high speed applications. Quality checks on various parameters like strength, grip etc are conducted on each piece ensuring the flawless final product. These cylindrical bearings are available in various dimensions and can also be modified as per our clients. requirements.

Special Cylindrical Roller Bearing
These are special cylindrical roller bearings that are supplyd using special bearing steel SAE 52100. The high quality steel ensures durability, better performance etc. The cylindrical roller bearings are supplyd using the latest technology which enables us to provide bulk buyers cost effective product. These steel bearings can be modified as per the buyers requirement. We provide three types special cylindrical roller bearings One Direction Locating Bearings, Two Direction Locating bearings and Full Complement Roller Bearings.

One Direction Locating Bearings
We offer one direction bearings that have separable outer or inner rings. The single flange of the separable ring prevents the bearing shaft from going in one direction. The double flanged race is guided by the roller guidance. They have a slightly lower limiting speed caused by the flange.

Two Direction Locating Bearings:
We supply two direction locating bearings that have a two piece inner ring or are self contained. These cylindrical bearings have a lower roller capacity but a high load capacity. They are rather complex bearings.

Full Compliment Bearings:
Full-complement Bearings use two snap rings in the non locating race to retain the rollers. These cylindrical bearings have high load capacity but low speed which is a result of the high rubbing velocity between adjacent rollers. This limits the bearings to low speed or oscillatory applications.

Physical Characteristics
A cylindrical shape would add to the stress concentrations at the end of the roller-race contact which results in high wear and high sensitivity to misalignment .Henceforth, they are usually crowned or end relieved.

Application of Cylindrical Roller Bearings
- Power generation
- Oilfield
- Mining and aggregate processing
- Gear drives
- Rolling mills
- Machine tools
- Transmissions
- Vibration machines and as wheel set bearings for rail vehicles.

Types of Cylindrical Roller Bearings
- Single or Double Row Bearings.
- Full Complement Cylindrical Roller Bearings.
- Crossed Cylindrical Roller Bearing.

Single Spherical Roller BearingsWe offer qualitative spherical bearings that have two rows of symmetrical spherical rollers and a common raceway in the outer ring. The bearings supplyd by us are acknowledged in the market for their high load taking capacity and self aligning ability. They have limited speed tolerating capacity and hence they are used in vibrators, shakers, conveyors, speed reducers, transmissions, and other heavy machinery. These spherical bearings are supplyd in varying radial thickness and axial widths to accommodate different loads. They not only can carry radial loads but can also carry axial load in two directions.

Double Row Spherical Roller Bearing
Double Spherical Roller Bearings from us consists of a plain bearing, with a ball pushing, inside a cylindrical housing. These cylindrical housing may have a liner supplyd from different material which minimizes friction or provides self lubrication. For different load capacity and lubrication requirement many balls or linear materials are available. These spherical bearings are maintenance free and are suitable for applications that involve swivel movement, high alternating loads, very high radial loads with a unilateral load direction and high shock loads.

Physical Characteristics
- Large bores
- More contact area
- Inner rings to resist cracking
- Allowance for static or dynamic misalignment
- Expansion capabilities

Pillow block bearings from Associated Enterprises are a blend of simple design and assembly. A pillow bearing has deep groove ball bearing, which is sealed on both sides an a spherical diameter on the outside with housing. The housing is either a casting or a sheet metal stamping. The pillow blocks are used to provide load support for rotating shaft axis. These units are supplied as plummer blocks or flanged housing mountings. The pillow block bearings are resistant to temperatures, dimensionally accurate and have high functionality. They have various applications in material handling, conveyors, packing machinery, shrink wrappers, printing presses etc.

Flanged Pillow Block Bearing
We offer Flanged Pillow Block Bearing covers the current units for metric and inch size shaft. Apart from these, the flanged bearing units are also used as locating bearings. They are best suited for short shaft and in applications where only minor thermal expansions occur. Axial clearance in the bearings absorbs small shaft expansions. The block unit is supplyd from cast iron and the flanged- housing unit is made from the sheet metal.

The small flanged housings are triangular in shape and the larger ones have a square shape. Different types of flanged pillow block bearings are used for mild and harsh conditions.

Industrial Pillow Block Bearing
We offer industrial bearings that are used for self aligning ball bearings and spherical roller bearings. They can also be used as a tapered bores on an adapter sleeve and on smooth shafts. These pillow block bearing are supplyd using gray cast iron and require grease lubrication. They are tested on several parameters for assuring quality standards. The industrial pillow bearings supplyd by us are appreciated for high impact, corrosion resistance and durability standards.

We supply wide range of tapered roller bearings, which consists of components such as cone or inner ring, cup or outer ring, tapered rollers or rolling elements and cage or roller retainer. The taper angles allow the tapered roller bearings to handle a combination of radial and thrust loads. These tapered roller bearings are supplyd using superior grades of steel that ensure durability of the product and hassle free usage. They find varied applications in cars, light and vehicles, agricultural equipment, wheel assembly etc.

Industrial Taper Roller Bearing
We supply Industrial Taper Roller Bearings in superior grades of steel. They can carry combinations of large radial and thrust loads. In the industrial taper roller bearings there is a difference between the inner and outer raceway contact angles, which causes a force component that drives the tapered rollers against the guide flange. The Industrial Taper Roller Bearings are used in the construction machinery, gear, construction, and vehicle supply. These durable industrial taper roller bearings can be customized as per specific requirements of the buyers. They can be availed from us at most competitive prices.

Advantages of Taper roller bearings
- Dimensional Stability
- Long Life Even In Contaminated Lubricant
- Durable Steel Cage
- Dimensionally Interchangeable With Other Bearing supliers

Applications of Taper Roller Bearings
- Car and vehicle wheel bearings
- Agriculture, Construction & Mining Equipment
- Various Axle Systems
- Conveyance Vehicles
- Gear Box, Engine Motors, Reducers

We offetr deep groove ball bearings, capable of operating at high speeds and are widely used radial bearings. These non-separable bearings are available in a wide variety of seal, shield snapring arrangements. It requires little attention or maintenance in service.

Physical characteristics:
- Deep groove ball bearings have deep uninterrupted raceways. This allows them to carry axial loads in both directions at reasonably high speeds.
- The bearing ring grooves are circular arcs made slightly larger than the radius of the ball.
- The balls make point contact with the raceways (elliptical contact when loaded).
- The inner ring shoulders are of equal height (as the outer ring shoulders).

Advantages:
- Can sustain radial, axial, or composite loads.
- Can provide both high-running accuracy and high-speed operation.
- Can take the place of high speed angular contact ball bearings.
- Simple design.
- Maintenance free.
- Longer service life.