Made from compacted pre-graded Titanium granules. Titanium endcaps welded in contamination free clean room conditions to ensure superior weld quality. These cartridges are ideally suited for certain corrosive applications.

Features: Made from compacted pre-graded Titanium granules Welded end-caps provided to prevent filtrate bypass Non particle shedding Backwashing possible with loot removal of captured solids Available in porosities ranging from 150 Microns to 0.5 Microns Available in 10", 20", 30", 40" lengths.

Applications : Pre-filtration of Liquids and gases, Recovery of Noble metal catalysts, steam filtration, gas sparging, solvent filtration etc.

Sintered bronze filter cartridges mainly useful for compressed air, liquid oxygen and silencing for filtration efficiency of 5 to 5o micron. Have wall thickness of 1 - 1.5mm and Differential pressure resistance upto 2-3bar. Though are cleanable type still require replacement within a year or so because of green microbial corrosion due to moisture.

Made from compacted pre-graded Titanium granules. Titanium endcaps welded in contamination free clean room conditions to ensure superior weld quality. These cartridges are ideally suited for certain corrosive applications.

Features: Made from compacted pre-graded Titanium granules Welded end-caps provided to prevent filtrate bypass Non particle shedding Backwashing possible with loot removal of captured solids Available in porosities ranging from 150 Microns to 0.5 Microns Available in 10", 20", 30", 40" lengths

Applications : Pre-filtration of Liquids and gases, Recovery of Noble metal catalysts, steam filtration, gas sparging, solvent filtration etc

Pleated SS 316/304 mesh cartridges offer the convenience of having a larger filtration area within a small enclosure since the media is pleated and enclosed within a cage of suitable diameter. These cartridges are absolutely non-particle shedding & hence prevent any product contamination. They are suited for filtration of viscous fluids at high temperatures & high pressures Made up of 3 layers of Mesh Enhanced filtration area because of pleated design Fully welded construction Reinforced with internal & external core Easily cleanable by reverse flushing Available in porosities ranging from 400 Micron to 1 Micron Available in io", 20" & 30" Length Applications : Dust Filtration, Viscous Fluids filtration, high pressure & high temperature molten monomer/ polymer filtration etc.

Made of spirally wrapped surface profile on axial supports, The particulate capture occurs between the slot openings on the surface of this filter media. The welded construction enables it to withstand higher differential pressures.

Features : Made of spirally wrapped surface profile on axial supports Precise and narrow slot openings Fully welded construction Available in different slot widths Cleanable by back flushing Available in 10", 20", 30" and 40" lengths.

Made from compacted pre-graded Titanium granules. Titanium endcaps welded in contamination free clean room conditions to ensure superior weld quality. These cartridges are ideally suited for certain corrosive applications.

Features: Made from compacted pre-graded Titanium granules Welded end-caps provided to prevent filtrate bypass Non particle shedding Backwashing possible with loot removal of captured solids Available in porosities ranging from 150 Microns to 0.5 Microns Available in 10", 20", 30", 40" lengths.

Applications : Pre-filtration of Liquids and gases, Recovery of Noble metal catalysts, steam filtration, gas sparging, solvent filtration etc.

Sintered bronze filter cartridges mainly useful for compressed air, liquid oxygen and silencing for filtration efficiency of 5 to 5o micron. Have wall thickness of 1 - 1.5mm and Differential pressure resistance upto 2-3bar. Though are cleanable type still require replacement within a year or so because of green microbial corrosion due to moisture.

Made from compacted pre-graded Titanium granules. Titanium endcaps welded in contamination free clean room conditions to ensure superior weld quality. These cartridges are ideally suited for certain corrosive applications.

Features: Made from compacted pre-graded Titanium granules Welded end-caps provided to prevent filtrate bypass Non particle shedding Backwashing possible with loot removal of captured solids Available in porosities ranging from 150 Microns to 0.5 Microns Available in 10", 20", 30", 40" lengths

Applications : Pre-filtration of Liquids and gases, Recovery of Noble metal catalysts, steam filtration, gas sparging, solvent filtration etc

Pleated SS 316/304 mesh cartridges offer the convenience of having a larger filtration area within a small enclosure since the media is pleated and enclosed within a cage of suitable diameter. These cartridges are absolutely non-particle shedding & hence prevent any product contamination. They are suited for filtration of viscous fluids at high temperatures & high pressures Made up of 3 layers of Mesh Enhanced filtration area because of pleated design Fully welded construction Reinforced with internal & external core Easily cleanable by reverse flushing Available in porosities ranging from 400 Micron to 1 Micron Available in io", 20" & 30" Length Applications : Dust Filtration, Viscous Fluids filtration, high pressure & high temperature molten monomer/ polymer filtration etc.

Made of spirally wrapped surface profile on axial supports, The particulate capture occurs between the slot openings on the surface of this filter media. The welded construction enables it to withstand higher differential pressures.

Features : Made of spirally wrapped surface profile on axial supports Precise and narrow slot openings Fully welded construction Available in different slot widths Cleanable by back flushing Available in 10", 20", 30" and 40" lengths.