Asian Engineering Company

Kalbadevi, Mumbai, Maharashtra

It is mandatory to wear Protective & Safety Gloves under regulation 4 of the Personal Protective Equipment at Work Regulation 1992. This regulation requires employers to provide suitable Hand Safety Gloves to employees exposed to health and safety risks such as burns, freezing, electrocution, abrasion, contusions, laceration and skin problems. We are a prominent Hand Safety Gloves Supplier and Exporter from Mumbai, offering a premium quality of this product. To be sure of the quality, we purchase them from reliable Hand Protection Gloves Manufacturers.
You can place bulk orders with us for Hand Safety Gloves and avail lucrative discounts. Moreover, we are strict in adhering to time limits for delivery

Ratchet Lashing Belts are used to fix the cargo while transporting, shifting or moving storage. Being more secure, reliable and much lighter in weight as compared to chains, wires and jute ropes which were traditionally used, Ratchet Lashing Belts have become a more reliable method of securing all types of load across an entire spectrum of requirements. These Ratchet Lashing Belts also offer a significant advantage over steel banding, the latter being much heavier and more prone to damaging the finished goods. Moreover these belts provide a superior level of cargo control through high pre-tensioning.
Depending upon the loading requirements, the webbing of the Lashing system is available in 25 mm, 35 mm, 50 mm, 75 mm and 100mm. There are different types of ratchet systems which are carefully designed and tested to exert the right amount of pre-tensioning of the lashing. These are manufactured as per the BS 5759 & EN-12195:2000 standards.

Advantages :

• Load restraint using a tensioning device (Ratchet)
• Effective and Safe control of loads while travelling
• Extremely quick and efficient tie down and release of load thus saving time
• No damage to the load being tied down.
• Lower weight also means lower transportation cost.
• Suppleness of polyester accommodates irregularities of the load. Chain may damage the load or grip in the wrong place

The Following Specifications Are Required At The Time Of Ordering The Ratchet Lashing System :

• Material Outer Diameter (OD)
• Effective Length (EL)
• Weight of Material in tons
• Type of End Terminals
• Total Length of Material

The Ear Safety Defenders, offered by us, are designed for moderate atmospheres of industrial noise, such as workshops, sheet metal shops, printing works, airports and also outdoors. Our Ear Safety Defenders provide excellent protection for all both short and long spells. We are a well-known Ear Safety Defenders Exporter & Supplier in India.

Counted amongst the leading Peel Ply Suppliers and Exporters in Mumbai, we offer an excellent quality of this product, bought from leading makers in the industry. The range, we present, is a Nylon base woven fabric that is used in the advance composite industry against the surface or the laminate where rough surface is required. Nylon Peel Ply Fabrics that we offer features porous and weave structure. It absorbs the excess resin, leaves rough impression on the surface and ensures a dirt-less and non-contaminated surface.

Nylon Release Peel Ply is available with us in a large quantity. Therefore, we can ably manage bulk order even on urgent notices. We make sure that the consignments are delivered in a timely manner at your doorway. Peel Ply Fabrics Etc can be bought from us at discounted rates. 

Physical Properties :

• Fabric thickness (nominal) - 0.145 mm
• Fabric weight (nominal) - 85 g/m²

Roll size : 1.8 mtr wide x 100 mtr long

EPS Foam is basically a polymer base product that is used for proper storage and transportation of various items. We make available EPS Foam of a highly graded quality, purchased from leading manufactures. It is available with us in different thickness and densities to suit the requirements of the clients. This light weight and rigid foam is appreciated for its low thermal conductivity, high compression, shock absorption properties and high strength. The worldwide demand of this product has made us a renowned EPS Foam Supplier and Exporter in Mumbai.
Customers can place bulk orders for Expanded Polystyrene Spray Foam and avail it at highly discounted prices. We make sure to deliver the consignments in a time bound manner.

We are offering superior quality Vacuum Bagging Films that are is used to form the vacuum bag in all types of composite mould. The most commonly used material is nylon film, which is known for its excellent physical properties such as high temperature resistance, toughness, good flexibility, high elongation and very less permeability. Nylon Vacuum Bagging Film can also be used for high temperature application if some more polymers are added. A range of film options are also available based on different requirements like temperature and other physical parameter. Also, the caprolactam level of less than 1 % makes it an ideal choice for most vacuum bagging applications. 
Physical Properties :

• Maximum use temperature 190^oc
• Color : green (customized color also available)
• Elongation : 375 %
• Flammability self-extinguishing melts
• Crystalline melting point 218^oc - 220^oc

 
Availability & Packaging :

• Thickness (nominal) >= 50 micron
• Pack size (nominal) 45 kg or customized as per specifications
• A wide range of width in tube and sheet are available up to 2 mts. in tubular form or 4 mts. in lay flat form
• Customized sizes also available
• The roll is wrapped in polyethylene and covered with hard card board case for protecting it from piercing or damaging from the pointed or sharp hard material

Being a customer focused organization, we are engaged in offering a wide range of Perforated Release Films. We procure this range from the authorized vendors who manufacture these films using high quality materials. These Release Film Perforated are widely acclaimed by the clients owing to their leak proof design and high load carrying strength. Further, We provide Release Films at affordable prices. 
Physical Properties :

• Used in temperature range of 125^oC to 160^oC for curing
• Suitable for use with polyester, epoxy and phonetic resin systems.
• Density : 1.68 g/cm³
• Elongation : 200 %
• Melt Point : 240^oc

We source a wide range of Webbing Sling such as Duplex Webbing Slings and Round Polyester Webbing Sling from trusted manufacturers only. Made from optimum grade raw material such as oil and acid resistant polyester, our Webbing Sling is highly valued for its features like high strength, light weight, secure grip, excellent tear resistance, etc. Thus, we are counted amongst the leading Polyester Webbing Slings Suppliers and Exporters from Mumbai.
Our logistics system is well-managed by a competent team. Our warehousing facilities are robust and allow us to maintain bulk of inventory. We make sure that the orders are delivered at your doorstep, within the decided time frame.

Highlighted Attributes :

• High strength to weight ratio
• Light to handle and easy to use
• Provide secure grip and eliminates damage to the load
• Excellent tear resistant impregnation
• Color coded to indicate ‘swl’ (safe working load), rating and marked with traceability code

We are offering superior grade Sealant Tape that is widely acknowledged for its excellent adhesion properties. Our wide range of Sealant Tape is available in various sizes and thicknesses in order to meet the specific requirements of the clients. Our Sealant Tape range includes Butyl Tape, Glass Fiber Tape, Masking Tape and Bopp Tape. These Sealant Tapes effectively seals the area wherever applied and their water resistant property makes them last for long. Clients can be sure of the quality as we procure Sealant Tapes from renowned manufacturers.
We house a large stock of Sealant Tape (Tacky Tape), thus, able to meet your urgent demands also, for any quantity. Our company is ranked amid the top-notch Sealant Tape Suppliers and Exporters in Mumbai. We offer this product at market leading rates.

We are a well-known PVC Pipe Clamps Supplier and Exporter from Mumbai. Our wide range of PVC Clamps has been bought from reliable manufacturers and is widely used in different industrial applications. These PVC Clamps are suitable for providing rigid support to the pipes in both lateral and longitude directions; therefore, they are also termed as Hydraulic Pipe Clamps. These PVC Hydraulic Clamps are used to reduce the stress on the pipe lines, which is caused due to unequal movements.
Our clients can avail these PVC Clamps for Hydraulics in variety of sizes and at very competitive prices. We strictly adhere to the set time limits for delivery. Moreover, we are capable of managing bulk orders on short notices.

Spiral Tubes that we provide are immensely used in advance composites industries. These Plastic Spiral Tubes are used to establish consistent vacuum throughout the mould in an evenly manner. These Spiral Tubes maintain vacuum throughout the mould even at full vacuum as these are capable of withstanding negative pressure without collapsing.
Physical Properties :

• Material : LLDPE
• Diameter id : 8.5 mm 10 mm 12 mm 14 mm 16 mm
• Maximum temp : 125^oc
• Thickness : up to 1.5 mm

Availability & Packaging :

• Length of coil – 50 mtr 25 mtr
• Packing : each coil wrapped with a shrink film and then packed in HDPE bags
• Packing : the roll will be covered with polyethylene bag to prevent from dust and foreign contamination
• Handling : roll has to be handled properly having taken care of collapsing
• Storage : has to be stored in the place where the sharp edges are not present and should be stored at room temperature.

Our range of Electric Shear is specifically designed to cut multilayered Aramide, Glass Fiber and other heavy-weight materials. Heavy Duty Electric Shear operates on the principle of conventional hand shear in which the cutting effect is produced by the up and down movement of the upper blade, the edge of which is in constant contact with the edge of the fixed lower blade. The principle employed in the Heavy Duty Electric Metal Shear has the advantage over rotary blade scissor because in that there is no bare shafts for threads to catch and wind up to eventually block the machine.

Steel Hose Clamps that we offer are manufactured using high-grade steel and appreciated widely for durability, high strength and corrosion resistance. These Stainless Steel Hose Clamps are used for tightly holding of hose with the connector or pipe. We procure these Steel Hose Clamps from the most trusted sources of the market and are available in different sizes and diameters. Our Steel Hose Clamps are available in two different varieties, namely SS (Stainless Steel) and MS (Mild Steel).

Our range of Static Mixer Tubes includes two component sides x side cartridge systems, disposable static mixers and cartridge dispensers. With conventional meter or mix manifolds the reactive materials meet with the manifold before mixers. If the material is allowed to gel, the manifold will plug and must be disassembled. This is a very time consuming and expensive task. Static Mixer Tubes have over sized bell inlet. The manifold and valves separately port the A and B material directly into the mixer. A metal jacket is reinforced if the working pressure inside the mixing nozzle exceeds 150 PSI. These Static Mixer Tubes are easy-to-clean and maintain. We provide different range of Static Mixer Tubes depending on material construction, length of the tube, design of the mixers, etc., depending upon the type of two components that has to be mixed. These Static Mixer Tubes are widely used in industries where two component’s chemicals or materials are used.

Rated amongst the reputed Surface Conditioning Hand Pads Exporters and Suppliers, we are providing Premium Surface Conditioning Hand Pads that have been manufactured by leading names of the industry, using superior grade materials. These hand pads are used for cleaning or smoothening of rough surfaces. Surface Conditioning Hand Pads are flexible and effectively remove rust from different surfaces of metal leaving a smooth surface behind.  These Surface Conditioning Hand Pads are flexible and effectively removes rust from different surfaces of metal leaving a smooth surface behind.
We have with us Surface Conditioning Pads in different shapes and sizes. Clients can place orders for any quantity and have the consignment delivered at their doorstep for any location across the globe. We offer Surface Conditioning Hand Pads at affordable prices.

We are a prominent Impact Wrench Exporter & Supplier in India. The Impact Wrench, offered by us, is demanded for qualities like rust resistance, durable quality, fine finishing, accurate dimension, corrosion resistance etc. The customers can avail this range of Impact Wrench from us in various designs and specifications as per their requirements.

We stand distinguished amongst the Diamond Disc Suppliers and Exporters in Mumbai. The Diamond Disc, offered by us, is purchased from reliable manufacturers only. It is developed from the high tensile plate, whose circumference is covered with different grit of diamond abrasives. The diamond abrasive of this Diamond Disc is attached with special resin, which ensures proper bonding of abrasive with the disc. Widely used for trimming and cutting of the FRP products, it is also referred to as Diamond Cutting Disc.
We make available Diamond Disc at competitive prices. Customers can place bulk order with us and have the consignments delivered at their doorstep, anywhere across the world. With us, timeliness of delivery is a sure-shot thing.

The Fibrous Disc, offered by us, is available in different diameter& grit to cater different needs of the customers. Avail the aluminum oxide or zinc oxide base fibrous disc. We offer Fibrous Disc, which is used with the help of a back up pad on angle grinders. Our Fibrous Disc is suitable for faster leveling of uneven composites products.

The Vacuum Bagging Breather Fabric, offered by us, allows air and volatiles to be removed within the vacuum bag and across the corner of the laminate or the mould. Our Vacuum Bagging Breather Fabric is designed to maintain the vacuum throughout the mould during the process. The basic material of Vacuum Bagging Breather Fabric is non-woven polyester, nylon or synthetic constructions. In addition, Our Breather Fabric is used to absorb excess resin present in some composite lay ups.

We are a reputed Air Engraving Pen Exporter & Supplier in India. We offer our Air Engraving Pen in various designs and specifications as per the diverse requirements of the customers. The Air Engraving Pen, offered by us, features variable zoom throttle that allows diverse engraving potentials from brittle ceramics to hard alloys.

We are a major Demolition Hammer Exporter & Supplier in India. Our Demolition Hammer is available in various designs, specifications and custom-made models, to meet the different requirements of customers. Leveraging on its features such as anti-corrosive, excellent in performance, longer service life, compact designs and smooth finish, our Demolition Hammer is high on demand.

We are a trusted Rotary Hammer Drill Exporter & Supplier in India. The Rotary Hammer Drill, offered by us, is appreciated for features like rust & corrosion resistance, durability, fine finish, accurate dimension etc. Avail the Rotary Hammer Drill from us in various specifications as per the needs. We offer Rotary Hammer Drill in bulk at competitive prices.

We offer a unique triangular design liner Torque Wrench to our customers. In our Torque Wrench, the desired torque value can be set, and is displayed in the torque windows on the handle. The classic “click sound” notifies the user when pre-set torque has been reached. The customers can avail Torque Wrench from us in various customizations.

We offer 5.4:1 – Maximum Torque 2700 Nm is ideal for applications where no electrical or air supply is available. The Hand Torque Multiplier, offered by us, is designed for precision tightening of threaded fasteners. Our Hand Torque Multiplier supports the loosing of nuts that are corroded or seized. We are an eminent Hand Torque Multiplier Exporter & Supplier in India.

• Accurate to within _+ 4%, talking the uncertainty out of high Torque tightening

We are reckoned as a reliable Combination Spanner Exporter & Supplier in India. The Combination Spanner, offered by us, is known for its features like accurate dimension, rugged construction, excellent performance, longer service life, reliable performance and more. Avail the Combination Spanner from us at market leading prices.

In order to meet the distinctive requirements of our customers, we offer our Spanner Socket in various technical specifications with customization solutions. Owing to the features like lightweight, rugged construction, trouble free life, long life, compact design etc. Our Spanner Socket is high on demand. We are a renowned Spanner Socket Exporter & Supplier in India.

We are a reputed Impact Socket Exporter & Supplier in India. We are engaged in offering our Impact Socket in various sizes, designs and specifications, so as to meet the specific requirements of our customers. Leveraging on the attributes like Corrosion resistance, High tensile strength, Lightweight, Longer service life, Accurate dimension etc. our Impact Socket has gained huge popularity in the global market.

Sourced from well-known Infusion Mesh Manufacturers, this premium quality product, offered by us, is a polymer mesh having diamond aperture. The Resin Infusion Mesh is used in advance composite industry and positioned plane on the mould surface to ensure the even flow of resin throughout the mould surface. Vacuum Infusion Mesh, we supply, is suitable for use under high vacuum and can withstand high negative pressure. We are a reliable Infusion Mesh Exporter & Supplier in India.
We have a bulk quantity of Flow Infusion Mesh readily available with us. Customers can avail this product at market leading rates and have the orders delivered at your doorway, within the set time frames.

The Foam Paint Roller, offered by us, is used to spread the paint evenly on the surface, control the coating thickness and provide smooth finish of the surface. The customers can avail Foam Paint Roller from us in different materials and densities as per the requirements. Our Foam Paint Roller can also be availed in different lengths & diameters with their edges round or flat based on the application. We offer different types of Foam Paint Roller such as Flocking Rollers, Fur/Fabric Rollers and Textured Foam Roller. 

We are a trusted Safety Helmet Supplier and Exporter in Mumbai, offering a superior quality of this product made by leading names of the industry. The Safety Helmets, offered by us, are developed using high quality ABS that does not visually fade over time. We provide Lightweight Safety Helmet that are well-balanced and feature ventilation space at the top of the helmet that allows adequate air to flow over the head. This reduces the heat building for wearer’s comfort.
Customers can avail Head Safety Helmets from us at reasonable prices in any quantity. We make certain to deliver the consignments at your doorstep, without any delays.

Our Safety Dust Mask is designed to reduce discomfort, which is caused by non-toxic nuisance dust. Our Safety Dust Mask is extremely lightweight and comfortable to wear. Our Safety Dust Mask comes with adjustable nosepiece and is maintenance-free (disposable). Our Safety Dust Mask is designed for easy breathing and speaking.

The Safety Face Guard, offered by us, features replaceable one piece clear polycarbonate lens which protects against chemical splashes, lens also has an aluminum edge. Our Safety Face Guard comes with built-in foam sweatband with a variable setting on the crown support. Our Safety Face Guard also features ratchet controlled headband adjuster with brow protection.

We are a reliable Suction Hose Pipes Exporter & Supplier in India. Sourcing a premium quality from trusted Suction Hose Pipes Manufacturers, we cater to a worldwide demand of this product. These Flexible PVC Suction Hoses have excellent strength, smooth finishes, reliable performance, sturdy construction, accurate dimension and more such attributes.
We maintain a bulk inventory of PVC Suction Hose Pipes and readily supply them to locations around the globe. Avail the Suction Hose Pipes from us in various specifications as per the requirements. Customers can be sure of receiving deliveries in a safe and timely manner. Furthermore, we offer Suction Hose Pipes at discounted rates.

The Flap Disc, offered by us, is available with us in different grit and size to suit different needs of the customers. Our Flap Disc comes with a multi paper, which in turns is directly mounted on angle grinders. Our Flap Disc is highly convenient in grinding extremely rough and uneven surface. We are a notable Flap Disc Exporter & Supplier in India.

When it comes to reliable Stainless Steel Fastener Exporters and Suppliers, the name of Asian Engineering Company stands tall. We procure SS Fasteners from reputed manufacturer and check the all the pieces against defects to be sure of the quality. These SS Fasteners are used in different industrial applications. Our Stainless Steel Fasteners are anti-corrosive and durable. Avail the Stainless Steel Fasteners from us in different grades as per your requirement.
We maintain a large stock of Stainless Steel Fasteners at our warehouse and readily supply any quantity. You can be sure of receiving the orders in a safe and timely manner. Moreover, we offer Stainless Steel Fasteners at nominal rates.