Details

MTW European Mill is innovatively designed through deep research on powder mill and development experience. It absorbs the latest European powder grinding technology and concept, and combines the suggestions of 9158 customers of powder mill. This mill perfectly satisfies the production demands of the customers on 200-33m (80-425Mesh) fine powder.

Advantage

1. unique structure2. all thin oil lubrication3. low power consumption, product size uniformity4. whole cast steel bearing5. stable performance6. limited analytical techniques, higher intensity7. less costs, easy management8. simple, compact and light mechanical structure

Product introduction

• Production capacity : 3-50T/H
• Range of Application : MTW mill is mainly used in mining industry, building materials industry and chemical industry, etc.
• Processable Material : It is suitable for materials such as quartz, feldspar, calcite, talcum, barite, fluorite, rare earth, marble, Bauxite, manganese ore, iron ore, copper ore, phosphate rock, zircon sand, slag, slag, cement and so on.

MTW European Mill is innovatively designed through deep research on powder mill and development experience. It absorbs the latest European powder grinding technology and concept, and combines the suggestions of 9158 customers of powder mill. This mill perfectly satisfies the production demands of the customers on 200-33m (80-425Mesh) fine powder.

Working principle

The system consists of grinding mill, separator, air blower, jaw crusher, vibrating feeder, hopper, dust collector, pipe, powder collector, electric cabinet, motors, etc.

Big lump materials are crushed to required size by jaw crusher, then elevated to buffering hopper through elevator, after that fed into the mill to be ground. Materials are to be ground between ring and rollers, and move up with the air flow, those particles which cannot pass the separator will fall down and be ground again, while others will be collected as finished product. Air flow passing through separator will go to the air blower for recycling, its a closed system.

Details

The multi-cylinder is the latest generation product which can replace the spring cone crusher in the mine construction industry today and the general hydraulic cone crusherwhich is the most ideal equipment for stone and mining crushing.

Working principle

While working the electric motor through vee belt transmission shaft big belt pulley bevel pinion big bevel gear drives the eccentric sleeve to rotate. With the driving of eccentric sleeve the dynamic cone makes pendulum movement making the dynamic cone and static cone approach and leave now and then. The material in the crushing chamber is crushed due to continuous impact and squeezing. Finally the crushed material is discharged from the bottom.

Product introduction

• Production capacity : 90-1200T/H Notice: this capacity is mean value and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material
• Range of Application : metallurgy construction white fuel transportation chemical engineering construction material

The multi-cylinder is the latest generation product which can replace the spring cone crusher in the mine construction industry today and the general hydraulic cone crusher, which is the most ideal equipment for stone and mining crushing.Its unique internal structure design and the application of wear resistant material can crush hard rock such as basalt, at the same time can crush various hard ore minerals, widely used in stone production, artificial sand, ore dressing production etc.

Details

Rod grinding sand making machine is widely applied in metal and nonmetal mining water conservancy industry and construction material to grind all kinds of ore and rock.

AdvantageTransmission

Transmission is constituted by reduction box transmission gear electrical machine and electronic control which drive device can match up with energy consumption of grinding process that lower energy consumption.

Rod mill medium

Rod shape medium makes final products finer.

Closed system

Ball mill and classifier constitute a negative pressure closed system that could reduce dust.

Rod mill lining plate

Wave stepped wedge shape are adopted on the lining plate of rod mill.

Product introduction

• Production capacity : 0.62-200T/H Notice: this capacity is mean value capacity and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory
• material.Range of Application : metal and nonmetal mining all kinds of rock or ore could grind for construction material industry and water conservancy industry.

Rod grinding sand making machine is widely applied in metal and nonmetal mining, water conservancy industry and construction material to grind all kinds of ore and rock. EMCC adopts advanced controllable inlet and outlet technology, grinding media is used according to corresponding grinding material, line contact replacing surface contact makes the discharging granularity uniform and productive, rod grinding machine has dry-type and wet type to choose, clients could select suitable type according to practical situation.

Working principle

Electrical machine drives barrel to rotate by reduction box and gearwheel gearing-down or low speed synchronous motor downshifts through gearwheel to rotate barrel. Barrel is loaded with steel bar as grinding medium. Under the centrifugal force and friction force grinding medium will be elevated to certain height and be thrown down. Grinded material will be put into barrel continuously from feed port and be grinded by moving medium processed material will be discharged out of machine by the force of overflow and feeding to the next process.

Details

EMCC Group has 20-year-experience of Raymond roller mill manufacturing and development. Recent year we keep improving Raymond mill technology on performance and quality.

AdvantageIndependent Production System

Independent production system can process material from bulk material to powder.

High Quality Wear-resisting Material

Major parts of Raymond mill adopts quality steel wear-resistant parts adopts high quality wear-resisting material good wear-resisting property of complete machine stable operation.Uniform Fineness Sieving Rate 99%.

Even final product size sieving rate could reach 99% incomparable performance

Main Machine TransmissionSealed gear case and belt wheel smooth transmission reliable performance.

Product introduction

• Production capacity : 1.2-3T/H Notice: Mean value the specific capacity is subject to clients actual equipment configuration.
• Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
• Range of Application : mining industry chemical engineering construction material and metallurgy industry over 280 kinds material process.

EMCC Group has 20-year-experience of Raymond roller mill manufacturing and development. Recent year we keep improving Raymond mill technology on performance and quality. Final size could be adjusted between 100-325 mesh, Raymond mill can process barite, calcite, potash feldspar, talc, marble, limestone, ceramics, glass and other non flammable materials whose Mohs hardness is less than 7, moisture is less than 6%, the rollers mill is used in mining industry, chemical engineering, construction material and metallurgy industry over 280 kinds material process.

Working principle

Raymond mill whole structure is constituted by main machine analytical engine plumbing installation and air blower crusher elevator electromagnetism vibrating feeder and electric motor. After being crushed to requested size material will be taken to storage hopper by elevator then vibrating feeder will convey material evenly and continuously to main machine grinding chamber under the force of centrifugal grinding roller swing outward and press on grinding ring shovel blade scoops material up to gap between roll and ring grinding roller rolls to grind material. After being grinded fine powder will be taken to classifier to be classified coarse material will fall down to be reground standard fine powder will go to finished product cyclone collector and discharged by discharge powder tube. There is moisture in material the heat caused by grinding process makes moisture evaporated all the connectors of pipe are not close-connected outside air will be inhaled cyclic pressure will be increased grinding mill could work under condition of negative pressure state incremental air will be discharged to dust collector through ductwork and it will be discharge into atmosphere after purification.

Details

MTW European Mill is innovatively designed through deep research on powder mill and development experience. It absorbs the latest European powder grinding technology and concept, and combines the suggestions of 9158 customers of powder mill. This mill perfectly satisfies the production demands of the customers on 200-33m (80-425Mesh) fine powder.

Advantage

1. unique structure2. all thin oil lubrication3. low power consumption, product size uniformity4. whole cast steel bearing5. stable performance6. limited analytical techniques, higher intensity7. less costs, easy management8. simple, compact and light mechanical structure

Product introduction

• Production capacity : 3-50T/H
• Range of Application : MTW mill is mainly used in mining industry, building materials industry and chemical industry, etc.
• Processable Material : It is suitable for materials such as quartz, feldspar, calcite, talcum, barite, fluorite, rare earth, marble, Bauxite, manganese ore, iron ore, copper ore, phosphate rock, zircon sand, slag, slag, cement and so on.

MTW European Mill is innovatively designed through deep research on powder mill and development experience. It absorbs the latest European powder grinding technology and concept, and combines the suggestions of 9158 customers of powder mill. This mill perfectly satisfies the production demands of the customers on 200-33m (80-425Mesh) fine powder.

Working principle

The system consists of grinding mill, separator, air blower, jaw crusher, vibrating feeder, hopper, dust collector, pipe, powder collector, electric cabinet, motors, etc.

Big lump materials are crushed to required size by jaw crusher, then elevated to buffering hopper through elevator, after that fed into the mill to be ground. Materials are to be ground between ring and rollers, and move up with the air flow, those particles which cannot pass the separator will fall down and be ground again, while others will be collected as finished product. Air flow passing through separator will go to the air blower for recycling, its a closed system.

Details

The multi-cylinder is the latest generation product which can replace the spring cone crusher in the mine construction industry today and the general hydraulic cone crusherwhich is the most ideal equipment for stone and mining crushing.

Working principle

While working the electric motor through vee belt transmission shaft big belt pulley bevel pinion big bevel gear drives the eccentric sleeve to rotate. With the driving of eccentric sleeve the dynamic cone makes pendulum movement making the dynamic cone and static cone approach and leave now and then. The material in the crushing chamber is crushed due to continuous impact and squeezing. Finally the crushed material is discharged from the bottom.

Product introduction

• Production capacity : 90-1200T/H Notice: this capacity is mean value and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : granite marble basalt iron ore cobble shale bluestone coal cobblestone construction material
• Range of Application : metallurgy construction white fuel transportation chemical engineering construction material

The multi-cylinder is the latest generation product which can replace the spring cone crusher in the mine construction industry today and the general hydraulic cone crusher, which is the most ideal equipment for stone and mining crushing.Its unique internal structure design and the application of wear resistant material can crush hard rock such as basalt, at the same time can crush various hard ore minerals, widely used in stone production, artificial sand, ore dressing production etc.

Details

Rod grinding sand making machine is widely applied in metal and nonmetal mining water conservancy industry and construction material to grind all kinds of ore and rock.

AdvantageTransmission

Transmission is constituted by reduction box transmission gear electrical machine and electronic control which drive device can match up with energy consumption of grinding process that lower energy consumption.

Rod mill medium

Rod shape medium makes final products finer.

Closed system

Ball mill and classifier constitute a negative pressure closed system that could reduce dust.

Rod mill lining plate

Wave stepped wedge shape are adopted on the lining plate of rod mill.

Product introduction

• Production capacity : 0.62-200T/H Notice: this capacity is mean value capacity and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory
• material.Range of Application : metal and nonmetal mining all kinds of rock or ore could grind for construction material industry and water conservancy industry.

Rod grinding sand making machine is widely applied in metal and nonmetal mining, water conservancy industry and construction material to grind all kinds of ore and rock. EMCC adopts advanced controllable inlet and outlet technology, grinding media is used according to corresponding grinding material, line contact replacing surface contact makes the discharging granularity uniform and productive, rod grinding machine has dry-type and wet type to choose, clients could select suitable type according to practical situation.

Working principle

Electrical machine drives barrel to rotate by reduction box and gearwheel gearing-down or low speed synchronous motor downshifts through gearwheel to rotate barrel. Barrel is loaded with steel bar as grinding medium. Under the centrifugal force and friction force grinding medium will be elevated to certain height and be thrown down. Grinded material will be put into barrel continuously from feed port and be grinded by moving medium processed material will be discharged out of machine by the force of overflow and feeding to the next process.

Details

EMCC Group has 20-year-experience of Raymond roller mill manufacturing and development. Recent year we keep improving Raymond mill technology on performance and quality.

AdvantageIndependent Production System

Independent production system can process material from bulk material to powder.

High Quality Wear-resisting Material

Major parts of Raymond mill adopts quality steel wear-resistant parts adopts high quality wear-resisting material good wear-resisting property of complete machine stable operation.Uniform Fineness Sieving Rate 99%.

Even final product size sieving rate could reach 99% incomparable performance

Main Machine TransmissionSealed gear case and belt wheel smooth transmission reliable performance.

Product introduction

• Production capacity : 1.2-3T/H Notice: Mean value the specific capacity is subject to clients actual equipment configuration.
• Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
• Range of Application : mining industry chemical engineering construction material and metallurgy industry over 280 kinds material process.

EMCC Group has 20-year-experience of Raymond roller mill manufacturing and development. Recent year we keep improving Raymond mill technology on performance and quality. Final size could be adjusted between 100-325 mesh, Raymond mill can process barite, calcite, potash feldspar, talc, marble, limestone, ceramics, glass and other non flammable materials whose Mohs hardness is less than 7, moisture is less than 6%, the rollers mill is used in mining industry, chemical engineering, construction material and metallurgy industry over 280 kinds material process.

Working principle

Raymond mill whole structure is constituted by main machine analytical engine plumbing installation and air blower crusher elevator electromagnetism vibrating feeder and electric motor. After being crushed to requested size material will be taken to storage hopper by elevator then vibrating feeder will convey material evenly and continuously to main machine grinding chamber under the force of centrifugal grinding roller swing outward and press on grinding ring shovel blade scoops material up to gap between roll and ring grinding roller rolls to grind material. After being grinded fine powder will be taken to classifier to be classified coarse material will fall down to be reground standard fine powder will go to finished product cyclone collector and discharged by discharge powder tube. There is moisture in material the heat caused by grinding process makes moisture evaporated all the connectors of pipe are not close-connected outside air will be inhaled cyclic pressure will be increased grinding mill could work under condition of negative pressure state incremental air will be discharged to dust collector through ductwork and it will be discharge into atmosphere after purification.