Our Products
Grinding & Milling Tools & Machinery
2 Products availableConveyors
2 Products availableSand
1 Products availableDomestic Fans, AC & Coolers
1 Products availableWoodworking Tools And Machines
1 Products availableWe are leaders in the market for providing best range of Ball Mill, Cement Ball Mill and Ceramic Ball Mill
ball mill could wet grind and dry grind many kinds of minerals and grindable material according to different ore discharge methods there are grid type and overflow type ball mill.
AdvantageDischarge portReasonable discharge port design de-ironing separator could be set according to clientss requirement
Lining boardHigh manganese steel plate is more wear-resisting and it has longer service life.
Wheel gearPinion drives rack wheel rotating
Reduction boxHigh quality and national standard reduction box
Product introductionball mill could wet grind and dry grind many kinds of minerals and grindable material, according to different ore discharge methods, there are grid type and overflow type ball mill.
Working principleThis machine is barrel horizontal type rotation device outer gear transmission and two bins. Raw material is taken to first bin from feeding port through hollow shaft there are stepped lining plate and corrugated plate inside the bin and different size of steel ball steel ball is taken to a certain height by the force of centrifugal which is caused by barrels rotation material will be impacted and grinded. After coarse grinding process in the first bin material will be delivered to the secondary bin. There are plane liner and steel ball to further grind the material. Powder material will be discharged from discharging grate plate and the grinding process is completed.
Model | rotate speed(r/min) | ball load(t) | Feed size(mm) | Discharge size(mesh) | Capacity (t/h) | main motor power(kw) | weight(t) |
Φ900×1800 | 36-38 | 1.5 | ≤20 | 48-200 | 0.37-2.1 | 18.5 | 4.3 |
Φ900×2400 | 36.4 | 2.1 | ≤20 | 48-200 | 0.5-2.4 | 18.5 | 4.8 |
Φ900×3000 | 36 | 2.7 | ≤20 | 48-200 | 0.8-2.5 | 22 | 5.3 |
Φ900×3500 | 36 | 2.7 | ≤20 | 48-200 | 1.1-3.8 | 37 | 5.8 |
Φ1200×1200 | 32.1 | 2.4 | ≤25 | 48-200 | 0.8-1.6 | 30 | 8.5 |
Φ1200×2400 | 31.38 | 3 | ≤25 | 48-200 | 1.4-2.8 | 45 | 11.4 |
Φ1200×3000 | 31.38 | 3.5 | ≤25 | 48-200 | 1.6-3 | 45 | 12.1 |
Φ1200×3500 | 32.4 | 5 | ≤25 | 48-200 | 1.6-3.5 | 55 | 12.7 |
Φ1200×4500 | 31.8 | 6.5 | ≤25 | 48-200 | 1.83-3.9 | 55 | 13.1 |
Φ1500×3000 | 29.2 | 9.7 | ≤25 | 48-200 | 2.8-9 | 95 | 14.8 |
Φ1500×3500 | 29.58 | 10.8 | ≤25 | 48-200 | 3.1-9.7 | 95 | 15.8 |
Φ1500×4000 | 29.58 | 12 | ≤25 | 48-200 | 4.8-10 | 110 | 17.9 |
Φ1500×4500 | 29.58 | 13.5 | ≤25 | 48-200 | 4.8-11 | 110 | 19.9 |
Φ1500×5700 | 30.15 | 15 | ≤25 | 48-200 | 5-16 | 130 | 23.4 |
Φ1500×6400 | 30.15 | 16 | ≤25 | 48-200 | 5.4-17.8 | 155 | 25.4 |
Φ1830×2400 | 25.4 | 10 | ≤25 | 48-200 | 4-10 | 130 | 23.7 |
Φ1830×3000 | 26.3 | 14.4 | ≤25 | 48-200 | 4.5-10.5 | 130 | 26.6 |
Φ1830×3600 | 25.4 | 15.2 | ≤25 | 48-200 | 5.3-10.8 | 155 | 27.6 |
Φ1830×4000 | 25.4 | 16.9 | ≤25 | 48-200 | 6-11 | 180 | 29.4 |
Φ1830×4500 | 25.4 | 20 | ≤25 | 48-200 | 6.8-11.5 | 180 | 30.4 |
Φ1830×6400 | 24.1 | 21 | ≤25 | 48-200 | 7-12 | 210 | 32.3 |
Φ1830×7000 | 24.1 | 23 | ≤25 | 48-200 | 7.8-13.8 | 245 | 34.2 |
Φ2100×3000 | 24.35 | 19.8 | ≤25 | 48-200 | 5.8-14 | 155 | 32.3 |
Φ2100×3600 | 23.7 | 20 | ≤25 | 48-200 | 7-20 | 210 | 33.8 |
Φ2100×4000 | 24.98 | 21 | ≤25 | 48-200 | 9-22 | 210 | 35 |
Φ2100×4500 | 23.7 | 24 | ≤25 | 48-200 | 9.5-32 | 245 | 40 |
Φ2100×6000 | 24.98 | 33 | ≤25 | 48-200 | 10-36 | 280 | 47.5 |
Φ2200×4500 | 24.98 | 27 | ≤25 | 48-200 | 7-16 | 280 | 48.6 |
Φ2200×5500 | 21 | 30 | ≤25 | 48-200 | 10-22 | 320 | 54.3 |
Φ2200×6500 | 21.7 | 32 | ≤25 | 48-200 | 14-26 | 380 | 58.2 |
Φ2200×7000 | 21.7 | 33 | ≤25 | 48-200 | 15-28 | 380 | 60.3 |
Φ2200×7500 | 21.7 | 35 | ≤25 | 48-200 | 15-30 | 380 | 62.1 |
Φ2400×3000 | 21 | 25.8 | ≤25 | 48-200 | 7.8-18 | 245 | 51.3 |
Φ2400×4500 | 21 | 30 | ≤25 | 48-200 | 13.7-28 | 320 | 61.7 |
Φ2700×2100 | 21.7 | 23 | ≤25 | 48-200 | 8.5-17 | 260 | 69 |
Φ2700×3600 | 21.7 | 37 | ≤25 | 48-200 | 11-27 | 400 | 86 |
Φ2700×4000 | 21.37 | 40 | ≤25 | 48-200 | 15-28 | 475 | 89 |
Φ2700×4500 | 21.37 | 48 | ≤25 | 48-200 | 16.5-36 | 475 | 97 |
Φ3200×3000 | 18.6 | 46 | ≤25 | 48-200 | 15.5-33 | 500 | 112 |
Φ3200×3600 | 18.6 | 56 | ≤25 | 48-200 | 17.5-40 | 630 | 118 |
Φ3200×4500 | 18.6 | 65 | ≤25 | 48-200 | 24-49 | 800 | 130.5 |
Φ3600×3900 | 17.8 | 75 | ≤25 | 48-200 | 25-53 | 1000 | 152.9 |
Φ3600×4500 | 17.8 | 88 | ≤25 | 48-200 | 29-65 | 1250 | 165 |
Φ3600×6000 | 17.8 | 117 | ≤25 | 48-200 | 35-80 | 1600 | 196 |
Φ4000×5000 | 16.4 | 121 | ≤25 | 48-200 | 46-97 | 1600 | 248 |
X
Cement mill, also called tube ball mill, mainly be used to grind finished product and raw material of cement plant, and also be applied in metallurgy, chemical, electric power and other industrial and mining enterprises for grinding all kinds of ores and other gradable materials.
AdvantageThe transmission partComposed by reducer drive pinion motor electronic control matching of actuator and energy consumption of grinding can lower the energy consumption maximumly.
The closed system ofBall mill and classifier make a closed suction conveying system without any dust pollution.
Feeding partReasonable feeding port design increase the charging rate.
Discharging partReasonable discharge port design de-ironing separator could be equipped according to requirements of clients.
Product introduction
Specification (diameter×lenghth ) | Rev (r/min) | Feeding Size (mm) | Production Capacity (t/h) | Grinding Body Loading Capacity (t) |
Main Motor | Main Reducer Model |
Weight (t) | ||
Model | Power (kw) | Rev (r/min) | |||||||
φ2.2×9.5 | 21.8 | ≤25 | 13~15 | 39 | TR1510-8 | 475 | 740 | ZD70 | 89 |
φ2.2×11 | 21.8 | ≤25 | 15~17 | 46 | TR1512-8 | 570 | 740 | ZD80 | 92 |
φ2.4×7 | 21.4 | ≤25 | 14~16 | 40 | TR1512-8 | 570 | 740 | ZD80-9 | 88.4 |
φ2.4×9 | 21.4 | ≤25 | 17~19 | 49 | TR1512-8 | 570 | 740 | ZD80-9 | 96 |
φ2.4×11 | 21 | ≤25 | 19~21 | 52 | YR630-8 | 630 | 740 | JDX630 | 122 |
φ2.4×13 | 21 | ≤25 | 21~22 | 56 | YR800-8/1180 | 800 | 740 | MBY710 | 131 |
φ2.6×11 | 20.6 | ≤25 | 24~26 | 65 | YR800-8/1180 | 800 | 740 | JDX710 | 149 |
φ2.6×13 | 20.6 | ≤25 | 28~31 | 81 | YR1000-8/1180 | 1000 | 740 | JDX800 | 158 |
φ3×9 | 19.13 | ≤25 | 40~45 | 85 | YR1000-8/1180 | 1000 | 740 | MBY800 | 159 |
φ3×11 | 18.92 | ≤25 | 44~47 | 95 | YR1250-8/1430 | 1250 | 740 | JDX900 | 177 |
φ3×13 | 18.92 | ≤25 | 39~45 | 116 | YR1400-8/1430 | 1400 | 740 | JDX900 | 200.7 |
φ3.2×11 | 18.3 | ≤25 | 45~48 | 112 | YR1600-8/1430 | 1400 | 740 | JDX900 | 213.6 |
φ3.2×13 | 18.7 | ≤25 | 50~55 | 133 | YR1600-8/1430 | 1600 | 740 | JDX1000 | 237 |
φ3.5×13 | 17 | ≤25 | 60~65 | 156 | YR2000-8/1730 | 2000 | 740 | TS130-A-F1 | 257.6 |
φ3.8×13 | 17 | ≤25 | 65~70 | 185 | YR2500-8/1730 | 2500 | 740 | DMG22/2500 | 313 |
φ4×13 | 16.3 | ≤25 | 78~80 | 191 | YRKK900-80 | 2800 | 740 | JS140-A | 348 |
φ4.2×11 | 15.8 | ≤25 | 100~110 | 185 | YR2800-8/17830 | 2800 | 740 | JS140-A-F1D | 350 |
φ4.2×13 | 15.2 | ≤25 | 110~120 | 230 | YRKK1000-8 | 3350 | 740 | MFY355-A | 380 |
Ceramic ball mill is the ball mill made of ceramic, its capacity is small but its often adapted to for small scale trial-manufacture, Ceramic ball mill is new type energy conservation ball mill machine designed and researched by domestic machinery experts, its also the combination of advanced technologies.
AdvantageTransmissionTransmission is constituted by reduction box transmission gear electrical machine and electronic control which its drive device can match up with energy consumption of grinding process that lower energy consumption.
Closed systemBall mill and classifier constitute a negative pressure closed system that could reduce dust.
Ceramic lining plateStand wear and tear shock resistance high temperature resistance acid and alkali resistant anti-separation easy to install and replace.
Ceramic dielectricStand wear and tear shock resistance high temperature resistance acid and alkali resistant anti-separation easy to install and replace.
Product introductionCeramic ball mill is the ball mill made of ceramic, its capacity is small but its often adapted to for small scale trial-manufacture, Ceramic ball mill is new type energy conservation ball mill machine designed and researched by domestic machinery experts, its also the combination of advanced technologies. Ceramic ball mill makes production capacity and crushing radio higher and it expands the range of application, its widely used in beneficiation, construction material and chemical industry, dry and wet types are available. Ceramic ball mill is used for better mixing and grinding process, even final product size and lower power consumption, different lining plate could be adopted according to different production requirements.
Working principleElectrical machine drives barrel to rotate by reduction box crushed ore and steel ball was put to to a certain height by lining plate under the force of friction and centrifugal then falls down under the force of gravity ore get further grinded and impacted grinded ore will be discharged outside the machine through discharge device standard final product will be classified by spiral classifier coarse sand will go back to be grinded through point feeder. Feeding machine feeds continuously and uniformly ore is taken to ball mill machine by joint feeder continuously and uniformly processed material is discharged by ball mill whole complete process could work
Model | effective volume (m3) | Maximum load (t) | motor power (kw) | rotate speed (r/min) | dimension (mm) |
Φ1300×1500 | 0.9 | 0.5 | 5.5 | 29.2 | 4562×1626×1867 |
Φ1600×1800 | 1.9 | 1 | 7.5 | 27.5 | 4890×1925×2130 |
Φ1800×2100 | 1.5 | 1.5 | 11 | 25.3 | 5120×2270×2510 |
Φ2100×2300 | 2.5 | 2.5 | 18.5 | 22 | 5390×2560×2800 |
Φ2500×3200 | 5 | 5 | 30 | 21 | 6122×3132×3120 |
Φ2950×3600 | 10 | 10 | 37 | 18 | 6350×3572×3541 |