Asian Agencies

Sadar Bazar, Delhi

Details

High Pressure Medium Speed Grinder is called high pressure grinding mill, and its new type grinding mill designed and developed by EMCC designing institute based on many years fine powder making machinery manufacturing experience, it is an international leading machine for high efficiency and low energy consumption.

AdvantageClassifier

Precision output size could be adjusted (0.613-0.033mm).

Grinding device

Eclipsed form multistage seal is adopted excellent seal performance.

Spacer protective measures

Mainframe is under protection easy to be replaced maintenance cost is reduced.

Spring strengthens grinding force

Under the effect of spring grinding force that roller impacting on material is increased by 800-1200kg.

Product introduction

• Production capacity : 0.4-35T/H Notice: this capacity is mean value capacity and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : For grinding and milling limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
• Range of Application : mining industry chemical engineering construction and metallurgy industry over 280 kinds of material fine powder making process.

High Pressure Medium Speed Grinder is called high pressure grinding mill, and its new type grinding mill designed and developed by EMCC designing institute based on many years fine powder making machinery manufacturing experience, it is an international leading machine for high efficiency and low energy consumption. High Pressure Medium Speed Grinder could process barite, limestone, ceramic, slag and other 280 kinds of non flammable material whose Mohs hardness is less than 9.3, moisture is less than 6%, it is applied powder milling in mining, metallurgy, chemical engineering and construction material industry fine powder process, final product size could be adjusted between 80-425 mesh (finest size could be 1000 mesh), 30-80 mesh coarse powder could be produced by adding a special device.

Working principle

High pressure medium speed grinder mill hosts 1000-1500 kg high-pressure spring fastening on roller suspender. After working grinding roller rotates around spindle and rolling close to the grinding ring under the high pressure spring and centrifugal force. Its rolling pressure is 1.2 times of Raymond powder machine under the same conditions so the output is much improved. When the material is put into grinding chamber it was grinded between grinding roller and grinding ring the powder was brought into analytical machine by recirculation air from air blower qualified powder was flowed into the cyclone powder collector the large particles was going to regrind. Circulating air return to blower to repeat the above process and the left air entered the Wind bag filter for purification. When the grinding roller and grinding ring reached a certain wear and tear which could ensure a stable yield and fineness under the steady pressure by adjusting the length of high-pressure spring.

Details

YGMX series high pressure ultrafine grinder could process barite, limestone, ceramic, slag and other non flammable material whose Mohs hardness is less than 9.3, moisture is less than 6%, it is applied in mining, metallurgy, chemical engineering and construction material industry fine powder process.

AdvantageSpeed Increase 10%

Speed of main shaft has been increased positive pressure of grinding is improved grinding area is increased because rollers diameter is increased and efficiency of grinding is improved.

High capacity match up with 1250 mesh single wheel classifier

Impeller blade is increased thickness of blade is decreased centrifugal force is increased resistance of powder and air is decreased; rational design of shell of classifier; rational design of air seal coarse particles are kept away from inside impeller final product quality is improved.

Air Blower

High wind pressure and small flow air blower gas collection tank steel plate thickness is increased rigidity is increased.

Main Machine Structure

Key parts of main machine are strengthened shock absorption device and air bellow are improved and covering cylinder possesses ground connection vibration damping and anti-crack performance.

Product introduction

• Production capacity : 0.4-18T/H Notice: Mean value the specific production capacity is subject to clients actual equipment configuration., 0.4-18T/H Notice: Mean value the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : Power process for limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
• Range of Application : Mining metallurgy chemical engineering and construction material industry fine powder process.

YGMX series high pressure ultra-fine powder grinder is the most advanced grinding mill designed by our techniques developing department, its widely applied in nonmetal mining industry, it possesses many advantages, such as stable working performance, wide range of application, simple structure, easy operation, high capacity, energy conservation and environment protection, and its high technology grinding mill. YGMX series high pressure ultrafine grinder could process barite, limestone, ceramic, slag and other non flammable material whose Mohs hardness is less than 9.3, moisture is less than 6%, it is applied in mining, metallurgy, chemical engineering and construction material industry fine powder process. In product development and technological innovation field, EMCC not only values the improvement of function, but also pursues efficiency, reliability, stability and persistence. We focus on helping clients to achieve long term and stable benefit.

Working principle

When main motor power decelerated by gear reducer center shaft and star rack will be forced to rotate roller will rotate around the center shaft under the force of centrifugal at the same time it parallel swings around arm shaft roller will be forced to press on grinding ring to make sure the perfect surface contact between roller and grinding ring. Roller revolves on its axis around roller material will be grinded and crushed grinded powder will be taken to classifier by air blowers air flow to be classified standard powder will be taken to cyclone collector by air flow then discharged by powder tube coarse powder will fall in the main machine chamber to be

Details

HGM Series of Three-rings and Medium-speed Micro-powder Grinder is absolute advanced leading machine in grinding mill industry.

AdvantageLong Service Life

Service life could be 1 year. Service life is longer than wear-out parts of impact crusher and turbine crusher if material and product size are same.

High Efficiency and Low Consumption

Under the condition of same material power and final product size its capacity is higher than jet mill and stirred mill by 40%.

Superfine Powder Process

Final size of the material processed by superfine mill could reach d975m.

Safety Operating

No antifriction bearing and bolt inside the grinding cavity no bearing or sealing element or bolt falling out and damaging machinery situation.

Product introduction

• Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
• Production capacity : 0.35-6T/H Notice: Mean value the specific production capacity is subject to clients actual equipment configuration.
• Range of Application : Non flammable brittle material whose Mohs hardness is less than 6.

Working principle

HGM Series of Three-rings and Medium-speed Micro-powder Grinder Mill is also called superfine grinding mill, its a new type superfine powder process grinder designed by EMCC and based on many years grinding mill production experience, this new type grinding mill absorbed advanced machinery manufacturing technology from Sweden and it was made after 20 times tests. HGM Series of Three-rings and Medium-speed Micro-powder Grinder is absolute advanced leading machine in grinding mill industry. HGM Series of Three-rings and Medium-speed Micro-powder Grinder is widely used in making fine powder or ultra-fine powder, and the raw materials should be non-inflammable and non-explosive under the Mohs hardness less than 6 grade such as limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore, etc. The lifetime of spare parts is relied on the hardness of raw materials, and is lowered once the Mohs hardness is up to 4-6 grades.

Details

YGM high pressure ultrafine grinder is also called ultrafine grinder, we learned experience and technology from Germany and Japan and solved many ultrafine powder classification difficulties, and EMCC finally developed YGM high pressure ultrafine grinder based on industrial grinder foundation.

AdvantageHigh pressure spring Strong grinding force

Compared with YGM high pressure ultrafine grinder the grinding force of YGM high pressure ultrafine grinders roller to material is increased by 800-1200 kg under the function of high pressure spring.

Big input size High output fineness

Big input size average out put size could be 6.5um.

Energy-efficient

In the condition of same capacity and fineness energy consumption is 1/3 of jet mills.

Seal Grinding

Eclipsed form multiple seal grinding device with perfect seal.

Product introduction

• Production capacity : 25-1000KG/H Notice: Mean value and the specific production capacity is subject to clients actual equipment configuration., 25-1000KG/H Notice: Mean value and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
• Range of Application : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory material.

YGM high pressure ultrafine grinder is also called ultrafine grinder, we learned experience and technology from Germany and Japan and solved many ultrafine powder classification difficulties, and EMCC finally developed YGM high pressure ultrafine grinder based on industrial grinder foundation. YGM high pressure ultrafine grinder is mainly applied in feldspar, talc, barite, marble, limestone, carbon black, argil over 500 kinds of material ultrafine powder process, final product size could be 500 mesh(25 micron)-2500 mesh(5 micron), finest size could be 3500 mesh(3.55 micron)

Working principle

After crushing process material will be taken to storage silo by elevator then vibrating feeder will bring material to machine grinding chamber then material will be scooped up to the gap between roller and grinding ring to be grinded blower makes air flow goes to grinding chamber powder will be taken to classifier to be classified coarse powder will fall and be reground standard fine powder will go to cyclone powder collector then discharged from discharge port. Material contains moisture water vapor would be generated when grinding some gas will be absorbed because the whole tube is not absolutely sealed and circular air volume would be increased in the system. To guarantee the grinding mill working in the negative pressure state extra air would goes into bag dust collector for purification.

Details

Hyper Pressure V Type Grinder is new type high efficiency grinding mill designed by EMCC engineer combining clients requirement and practical situation.

AdvantageStar rack and V type grinding roller

centrifugal force is transformed to grinding force grinding roller parallel transmit around vertical axis to press grinding ring to guarantee the max surface contact of grinding roller and grinding ring capacity is improved by 30%.

Classifier is available

According to fineness requirement bladed classifier (80-325 mesh) and cage classifier (200-1250 mesh) are available.

Spacer protective measures

Main machine is under protection easy to be replaced and maintenance costs is reduced

Grinding device

Grinding roller and grinding ring get wear uniformly and lengthen the using lifetime.

Product introduction

• Production capacity : 0.5-40T/H Notice: this capacity is mean value capacity and the specific production capacity is subject to clients actual equipment configuration.
• Processable Material : Power process for limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
• Range of Application : Glass rubber farm chemical enamel oil paint phosphatic fertilizer and papermaking industry.

Hyper Pressure V Type Grinder is new type high efficiency grinding mill designed by EMCC engineer combining clients requirement and practical situation. Compared with traditional high pressure trapezium mill and high pressure overhang roll mill in the market, it has many advantages. Hyper Pressure V Type Grinder is widely applied in glass, rubber, farm chemical, enamel, oil paint, phosphatic fertilizer and papermaking industry and it could process material whose Mohs hardness is less than 9.3, moisture is less than 6%, such as talc, barite, calcite, limestone, manganese ore, iron ore, quartz stone and bentonite.

Working principle

After reducing driving force of the main motor by the gear reducer when the drive center axis and the quincunx rack fixed on the center axis revolve under the centrifugal force the roller revolves around the center axis at the same time parallel swing around the shaft making the roller compress out side to the ring thus ensure that the roller and ring has maximum surface contact. At the same time the roller self revolves around the roller shaft making the material scooped up by the shovel blade to grind after grinding the powder blew to upper part of the mainframe then separating by the separator too coarse powder drops to the grinding room to re-grind the qualified powder airflows into the cyclone powder collector through the discharging pipe is qualified product.