Asia Pacific Engineering Services

Panjim, Goa

Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.

The Blastcrete HBS-1500 is our newly designed mixer/pump designed for mixing and pumping gypsum flooring materials extreme distances. Our 4 in. hydraulic ball seat pump is capable of producing 1000 PSI line pressure and can consistently pump gypsum materials in excess of 600 ft. at a rate of 130 bags per hour. The ball seat design will drastically reduce maintenance cost vs. competitive machinery. The HBS-1500 is equipped with our 12 cu. ft. hydraulic spiral mixer (30 second mix time) that dumps into our 26 cu. ft. receiving hopper that includes our conveying hydraulic agitator. Our receiving hopper and pump manifold unclamp from the pumping tubes allowing easy clean up of the ball-seat manifold and material pumping tubes. The HBS-1500 can also be used to pump concrete mixes up to 1/2 in. aggregate positioning this machine as the most versatile and user-friendly for gypsum flooring contractors. Best value, most versatile, longest pumping distances, and lowest maintenance mixer-pump on the market!

Atlantic Sand/Screed Pump ASP 5000 is a well-designed and user-friendly pneumatic conveyor. It is simple to operate, easy to service and offers productivity of 5 m3/hr. Equipped with an in-built air compressor and a large vessel outlet, the machine is ideal for mixing and conveying sand, floor screed, gravel and fine-grained concrete to higher floors and longer distances.

The German engineered diesel hydraulic models come with a powerful Deutz diesel engine and a groundbreaking cooling system. The patented twin hydraulic driven cooling fans are designed for Middle Eastern site conditions.

A stainless steel hood displays the robust construction and quality workmanship. The machine features an automatic central lubrication system, a spacious work area for easy and quick maintenance and a fuel tank in steel construction, with filler neck positioned outside.

Atlantic Sand/Screed Pump ASP 6500 is a high capacity and user-friendly pneumatic conveyor. It is simple to operate, easy to service and offers productivity in excess of 5 m3/hr. Equipped with the largest loading hopper in its category that is supported by twin hydraulic cylinders, while the vessel has a large outlet, the machine is ideal for mixing and conveying sand, floor screed, gravel and fine-grained concrete to higher floors and longer distances.

The German engineered electric hydraulic models come with a dual frequency 50/60 Hz electric motor and must be powered by an external air compressor.

A stainless steel hood displays the robust construction and quality workmanship. The machine features an automatic central lubrication system and a spacious work area for easy maintenance.

The ChemGrout CG-570-3C6 is versatile and time tested grout plants when it comes to mixing and pumping wide range of materials such as repair mortars, stucco, plasters, fireproofing and finish coats. The CG-570-3C6 features a size 6 open throat progressive cavity pump, with a non-pulsating positive displacement rotor-stator that ensures a constant discharge of material gives an output of 8 gpm at 261 psi. Its 45 gallon mixing tank is equipped with bag breaker, baffles and a variable speed high-efficiency paddle mixer, that provides high shearing action for thorough and complete particle wetting. The pump's new high-strength aluminium alloy construction offers durability and a weight reduction of 33% over that of similar pumps.

The ChemGrout CG-680 colloidal pump provide continuous mixing and pumping of cement slurries, fly ash, bentonite and lime flour. The CG-680 colloidal grout pump feature a 17 cubic foot high shear colloidal mixer and a 17 cubic foot agitated storage tank, equipped with a high speed centrifugal diffuser-type pump that disperses the cementitious material down to its finest particle size to achieve complete particle wetness. The CG-680 colloidal grout pump gives a maximum output of 45 gpm at 261 psi.

The ChemGrout CG-550 Thin Mix series includes both skid and trailer mounted grouting equipment. The Thin Mix unit is designed to mix and pump neat cements, bentonites, cement/bentonites, and lightly sanded grout mixes. These units feature a 45 gallon (170 liters) mixing tank, a 10 gallon (38 liters) holding hopper and a 10 GPM (38 LPM) progressive cavity grout pump. The balanced design of this grout plant allows continuous mixing and pumping, while the hopper is feeding the pump another batch can be mixed. The mix tank is equipped with baffles, bag breakers and variable speed high-efficiency paddles that provide rapid mixing. The tank outlet valve is a large slide gate that allows the materials to fall easily into the pump hopper. The grout pump is a variable speed, positive displacement, progressive cavity, rotor-stator pump. Operator controls are centrally located for efficient production. All components are easily accessible for operating, cleaning, and maintenance. The trailer mounted unit is road and job site ready equipped with leaf springs, lights and a working platform.

The compact and portable ChemGrout CG-050 Mini Grout Pump remains the industry's choice for efficient grouting of smaller applications.

The heavy CG-050 Mini is an easy to use, portable, skid mounted, hand operated grout pump, designed for smaller jobs using high viscosity slurries and most pre-packaged grouts.

The CG-050 Mini features a 5 gallon holding hopper and a 2" piston pump.

Designed for pumping grout mixes, high viscosity slurries and premixed grouts, it delivers up to 5 gpm with pressures to 225 psi (400 psi hydraulic).

Engineered for minimal maintenance, the CG-050 Mini has only three wetted and five working parts. Quick disconnect couplings allow for rapid disassembly in just seconds for easy maintenance and clean-up.

Atlantic Worm Pump AWP 10000 is a high volume screw pump delivering an output of 10 m3/hr and is driven by a 10 HP (7.5 kW) electric motor. With a special Rotor Stator at its heart, the machine is ideal for pumping liquid screed, grout and mortar with grain size up to 10 mm.

This machine is of interest to flooring contractors and grouting applicators, who can pump site mixes and pre-mixed bag materials to distances of 100 m. The heavy duty rotor stator being the only wear component, it keeps the maintenance cost very low.

Adjustable material flow with remote control, right and left spinning of the worm pump, hopper grid opening with safety shut off and large hopper opening for easy cleaning, are some of the features that come as standard, on this German engineered screw pump.

The ChemGrout CG-550-030 features a single acting, variable speed 3" piston pump that provides the versatility to handle materials ranging from fluid slurries to heavily sanded grouts. This single acting piston pump is engineered for easy operation and low cost maintenance. The ChemGrout CG-550-030 is designed to give consistent non-stop discharge of material which virtually eliminating clogging of tremie lines. Its large 45 gallon mixing tank features specially designed blades and baffles that develop a high shearing action, insuring rapid and thorough mixing giving an output of 16 gpm and pressure of 400 psi. The Rugged Series has skid and trailer mounted versions with hydraulic and air power options.

The balanced design of the ChemGrout CG-550 allows continuous mixing and pumping of neat cements, bentonites, non-shrink grouts, cement/bentonite, cement/sand, non-shrink, self leveling and most packaged grout mixes. The CG-550 grout pump comes with either 2C4 or 3C4 progressive capacity pump, which gives an output of 8 gpm at 174 psi or 261 psi respectively. The heavy duty grouting work horse features a 45 gallon mixing tank and 10 gallon holding hopper, thereby offering exceptional productivity, low maintenance and quick payback.

Atlantic High Pressure Water Jet Pumps, AJP series are compact in design and they can be powered by diesel or gasoline engines and even electric motors. AJP series are designed for professionals who need excellence and performance on site. They are versatile, easy to transport and ideal for jobs like machine and equipment cleaning, old plaster removal, subfloor preparation for new coatings, etc.

The Putzmeister P 13 is a diesel engine driven piston pump, known for its excellent reliability, robust construction, durability and performance.

The Putzmeister P 13 is a mixing, pumping and spraying machine in one with mixer, pump and compressor.

Its driven by a 2 cylinder Kubota Engine with 12.5 kW power and has a built-in air compressor.

With a maximum output of 80 l/min at 40 bar maximum pressure, the Putzmeister P 13 has a pumping distance of 100 m and 300 m horizontal and 100 m high.

Applications

AT 50 X Peristaltic Pump operates by rotary principle, it pumps low and high viscosity materials with greatest care and high efficiency. The pump's diaphragm is made of a special solvent-free compound polymer for a higher performance and long life

This ideal diesel engine or electric motor driven machine is mounted on a 2-wheel trailer with or without brake, equipped with a double piston pump, for pumping and transporting the most difficult materials, with delivery height nearly 70 meters.

The extremely high performance, together with low operational cost due to high quality components used, makes "Atlantic" the most reliable partner in construction sites.

The robust design requires a minimum of space and low weight

The ChemGrout CG-050M is the most powerful hand grout pump in the industry providing more than 200 psi of injection pressure. The heavy duty ChemGrout model CG-050M is an easy to use, portable, skid mounted, hand operated grout pump, designed for smaller jobs using high viscosity slurries and most pre-packaged grouts. The CG-050M features a 5 gallon holding hopper and a 2" piston pump that produces discharge head exceeding 150 feet (ideal for vertical lifting). The pump comes complete and ready to use with a free 12.5 foot grout hose and a set of spare piston cups. Its lightweight aluminum construction offers mobility in areas where no air (pneumatic) or electric power sources are available. The manually powered, positive displacement piston pump, disassembles in minutes without any tools for quick cleaning and simple maintenance.

The compact and portable ChemGrout CG-050 Mini Grout Pump remains the industrys choice for efficient grouting of smaller applications.

The heavy CG-050 Mini is an easy to use, portable, skid mounted, hand operated grout pump, designed for smaller jobs using high viscosity slurries and most pre-packaged grouts.

The CG-050 Mini features a 5 gallon holding hopper and a 2 piston pump.

Designed for pumping grout mixes, high viscosity slurries and premixed grouts, it delivers up to 5 gpm with pressures to 225 psi (400 psi hydraulic).

Engineered for minimal maintenance, the CG-050 Mini has only three wetted and five working parts. Quick disconnect couplings allow for rapid disassembly in just seconds for easy maintenance and clean-up.

Applications

Peristaltic Pump operates by rotary principle, it pumps low and high viscosity materials with greatest care and high efficiency. The pump's diaphragm is made of a special solvent-free compound polymer for a higher performance and long life.

We are the main supplier of this product.

The DRAGFLOW Dredge Cutter head is a custom engineered system. DRAGFLOW's dredging specialists carefully analyze customer requirements and operating conditions to arrive at the design criteria - cutter profile, size, beta, arm quantity and shape, tooth size, tooth orientation. What is more, the combination of the Cutterhead with the agitator avoids any clogging problem at the pump suction. DRAGFLOW 's Cutterhead can be used with every DRAGFLOW's Hydraulic Pumps and can increase the efficiency particularly in presence of hard and compact material.

Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.

Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.

Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids. Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.

Dragflow is a world player in solid pumping solutions with over 25 years of experience in manufacturing heavy duty submersible dredging pumps and complete dredging equipment. Dragflow is focused on the continuous development of its design and manufacturing activities for dredging, mining and industrial sectors. From its manufacturing base in Verona, Italy, Dragflow produces Electric and Hydraulic driven Submersible Pumps for tough site conditions and especially designed for handling slurries with a high content of abrasive solids.

Over the past 25 years, Dragflow Pumps and Dredgers have been supplied for deep sea harbour dredging, sand mining, reclaiming beaches and cleaning of lakes, rivers and dams.

These are heavy duty submersible pumps with the ability to pump solids with specific gravity up to 1.8 t/m3.

Pumps have an agitator to aid effective solid pumping.

Low rotation speed and high abrasion resistance.

Pump capacity range from 60 m3/h to 720 m3/hr.

Pump power range from 13 kW to 90 kW.

Head capacity from 12 m to 46 m.

Solid handling capacity more than 70% by weight of material density.

Suitable for high head applications and deep water dredging projects.

Applications

High abrasion resistance.

Low rotation speed.

Solid handling capacity of 70% by weight of material density.

Pump capacity range from 30 m3/hr to 1300 m3/hr.

Pump power range from 3.7 kW to 150 kW.

Head capacity from 12 m to 55 m.

Applications