GST : 06AAVPG8224D1ZO
Verified
Write a Review
Our Products
Optical & Laser Instruments
2 Products availableOptical Instruments
2 Products availableMagnetic Meter
2 Products availableTelescope, Compass & Survey Tools
2 Products availableOur Complete range of products are Hydraulic Press Model, Nodal Slide Assembly, Slits, Thermal Conductivity of Cu by Angstroms Method and Earth Inductor.
It meets three important requirements for accurate indication of wind direction. It is designed to produce the maximum of torque relative to its moment of generator for a given change in wind direction.It rotates with minimum friction, and is balanced to avoid bias towards any particular direction. Most suitable for mounting on buildings very useful Meteorological departments. As per I.S.I. specification with cardinal points on cast iron stand.
Hydraulic press model based on Pascal's law consists of metal tube fitted on plastic base.
It is used for measuring viscosity of very viscose liquids. The outer cylinder can be clamped at any desired height and the inner cylinder is graduated in mms and slot is covered by a transparent cover. Complete with scale pans and releasing pin.
Application/Usage
Single slit :- All metallic, diffraction grating clamp type and is fitted on prism table of spectrometer for interference of light experiment.
Double Slit :- All metallic diffraction grating clamp type and is fitted with two micrometers screw slides forming a double slit with fine edges in the center of the vertical clamp holding device. Very superior quality.
Micrometer Slit (Slit for resolving power of telescope) :- The micrometer slit has a heavier screw thread, 0.5 mm pitch x 6 mm dia, carrying a drum which is divided into fifty divisions giving a reading of 0.01 mm. An index is provided with a 5 mm sale divided in 0.5 mm divisions.
"Consist of following apparatus:-
"College type. Read by two opposite verniers reading to one minute of the arc. The objectives used in telescope and collimators are achromatic and provided with rack and pinion focusing arrangement. Telescope arm and prism table are provided with fine and coarse adjustment. The prism table is provided with three leveling screws and is engraved with concentric ring and lines. The scale and verniers are of stainless steel and are machine divided. Cover plate protects the scale from dust and carries two transparent windows for verniers. The instrument is finished in pleasing and smooth duco colour and other necessary parts are chromium plated.
With prism clamping device and diffraction grating stand in polished wooden case:
Application/Usage
Consisting of cylindrical copper rod with its one end surrounded by a steam jacket for heating it from a boiler and the other end is kept cool by a steam of water flowing through a spiral tube provided at that end. Fitted in wooden case lined with felt. The front portion of the case is removable. Without thermometers or steam boiler.
(a) Size of rod 30cm long 1.8cm dia.
(b) Size of rod 30cm long 2.5cm dia.
(c) Size of rod 30cm long 3.7cm dia.
Application/Usage :- To determine the thermal conductivity (K) of good conductor(Cu) by a Searle’s method.
1. Angstrom's Experimental Setup: consists of 0-50V and 0-4 amp A.C supply fitted with voltmeter and ammeter with built in signal generator which provide the square wave signal to the power supply with a time period of 38 sec.The time period of the square wave generated is indicated by two LED''s( red LED for ON time and Green LED for OFF time) 2. Sample rod:Copper rod 50cm long and 2.5 cm dia fitted inside the wooden box to protect from the energy loss. 3. Heater Coil:Fitted on copper rod. 4. Thermometer (0-200 degree C) - Set of 03 5.Stop Clock and connecting leads.
Application/Usage :- To determine the thermal conductivity (K) of good conductor(Cu) by a Angstrom method
Optical bench double rod half Shapered : 1 meter or 1.5 meter long long consists of two rods with four metal riders two of sliders have transverse motion with two lens holder & needle.
(a) OPTICAL BENCH: Same as above but both rods of steel C.P.
(b) OPTICAL BENCH: Same as above but both brass covered pipe inside steel rods.
(c) OPTICAL BENCH: Same as above but both stainless steel rods.
Optical Bench Double rod Full Shapered :- One meter long consists of two rods on heavy sliders;two sliders have liter motion with two lens holder & two needles.
(a) Both rods of steel C.P.
(b) Both brass covered pipe inside steel rods.
(c) Both stainless steel rods.
Fly Wheel without counter :- Comprising of carefully machined and balanced cast iron wheel and steel spindle is supported on the ball bearings in strong iron brackets. The sides of wheel are smoothly red painted. The top of wheel is chrome plated and is marked with a thick red line. A pointer is fixed to one of the brackets. Diametric hole is drilled in the shaft to take a pin and cord the base is provided with four holes so that the apparatus can be fixed to wall complete with cord and hook.
Application/Usage :- To determine the moment of inertia of a flywheel.
Fly Wheel with counter :- Comprising of carefully machined and balanced cast iron wheel and steel spindle is supported on the ball bearings in strong iron brackets. The sides of wheel are smoothly red painted. The top of wheel is chrome plated and is marked with a thick red line. A pointer is fixed to one of the brackets. Diametric hole is drilled in the shaft to take a pin and cord the base is provided with four holes so that the apparatus can be fixed to wall complete with cord and hook.
Application/Usage :- To determine the moment of inertia of a flywheel.
The Bakelite ring of 6”dia is provided with three windings of 2.50 and 500 turns. Compass box and the ring can both be rotated independently of the base, which is fitted with leveling screws. Compass box is pye type with bakelite case, metal dial, and antiparallex mirror and with aluminium pointer fitted with English jewel.
Dial Type Resistance boxa) One dialb) Two dialc) Three diald) Four diale) Five dial
It consists of a solid brass rod of length 30cm and diameter 1.5cm, with center split chuck for clamping and suspending
"Cast Iron with clamping screw for general in Laboratory.
Travelling Microscope 2 Motion : With horizontal and vertical scales. The bed is of cast iron and accurately machined. The horizontal carriage is machined and inters ground on the guide ways of the horizontal bed. The carriage is fitted with vertical brass pillar carrying a microscope tube on a ground fitted vertical carriage. The base is fitting with two leveling screws Horizontal scale is 20cms and vertical 15cms. Long. Both the horizontal scale and vertical carriages are provided with slow motions, which travels app. 3cms in one traverse. Microscope tube is provided with rack & pinion. A milk white Perspex platform is provided on the horizontal bed. Vernier constant 0.001cms. Having stainless steel scale. Complete in well-polished wooden case.
Application / Usage :- To determine the refractive index of a glass slab using a travelling microscope.
Deluxe Travelling Microscope 3 motion : For certain measurement it is found more convenient to provide sliding motion to the microscope tube across the stage, in addition to all other usual movements. A sliding carriage is fitted on the top carriage which moves at the right angle to the horizontal motion by means of rack and pinion. This motion is also graduated in millimeters having vernier reading of 0.1mm. Supplied in a superior quality wooden box.
Application / Usage :- To determine the refractive index of a glass slab using a travelling microscope.
The brass wheel is 7.5cm dia and 3cm at its rim, carefully balanced and all the three pairs of pivots are adjustable. Complete fitted on metal base.
Portable Autoclave Aluminium (Electric) :- Seamless construction ensures bacteria free environment. The Unit is made of Aluminium. Equipped with pressure gauge, safety valve, double safety valve, steam release valve, vacuum release valve, rubber gasket, 8 wing nuts, inner tripod stand and mild steel stand for Autoclave.
Finish: Mirror Finish, Power Source: 220, 50Hz, Single Phase
Portable Autoclave Stainless Steel (Electric) :- Seamless construction ensures bacteria free environment. The Unit is made of Stainless Steel. Equipped with pressure gauge, safety valve, double safety valve, steam release valve, vacuum release valve, rubber gasket, 6 wing nuts, inner container, inner tripod stand and mild steel stand for Autoclave.
Finish: Mirror Finish, Power Source: 220, 50Hz, Single Phase
Technical Specifications
| Size | Capacity |
|---|---|
| 12” x 12” | 20 ltr. |
| 12” x 15” | 25 ltr. |
| 12” x 22” | 40 ltr |
Additional Information:
Delivery Time : 2-3 days
To determine the moment of inertia of an irregular body about an axis passing through its center of gravity and perpendicular to its plane by dynamical method. It consists of an aluminum disc of approximately 6” dia with a groove and having three masses in it. It can be suspended by a steel wire provided at the center of a long frame work provided with circular base, which is also fitted with leveling screws.
Reading Telescope Simple :- Simple form focusing from one meter to infinity with universal clamp tripod base stand 18cms focus object glass Focusing arrangement is provided with rack and pinion arrangement. Simple form focusing from one meter to infinity with universal clamp tripod base stand 18cms focus object glass Focusing arrangement is provided with rack and pinion arrangement.
Reading Telescope Up & Down :- Achromatic object glass, focal length 178 mm clear apertures, focusing by rack and pinion (with up and down motion). Carriage for telescope with adjustable ring to stop abrupt falling fitted with adjustable screws for precise vertical and horizontal positioning; scale and scale holder are provided with stand.25mm dia steel pillar, fitted on a heavy cast iron base with three leveling screws. Both tubes of the telescopes are of brass. With scale holder.
Application / Usage :- To determine the resolving power of a telescope.
Deluxe Reading telescope :- The superior quality achromatic objective has an aperture of 25mm and has focal length of 17.5cm. The carriage of the telescope (with up and down motion, improved design, college pattern) tube is fitted with vertical movement by a fine micrometer screw. Focusing arrangement is given by rack and pinion. Complete on a heavy metallic stand having pillar of 18” length with scale and scale holder.
Application / Usage :- To determine the resolving power of a telescope.
Astronomical cum terrestrial Telescope :- It is light and easy to manipulate and high magnifying power. Overall length of Astronomical Telescope is 85cm fitted with high class achromatic objective of dia 45mm having focal length 22 inches. Astronomical Telescope is used as a Terrestrial Telescope. Complete with velvet lined case.
Application / Usage :- To determine the resolving power of a telescope.
Specially deeigned for Newton experiment. It can also be used in various positions. The bed is of cast iron and carries the machined guide ways. The scale is 17cms long. The sliding carriage is provided with microscope slow motion and travels app. 3cms in one traverse. Microscope tube is fitted with achromatic objective and focusing is provided with rack and pinion. Vernier constant 0.001cm. Complete in well polished wooden case. Having stainless steel scale and vernier.
Two equal coaxial coils separated by distance equal to the radius of coils with superior quality compass box.
"In well polished wooden case with leveling screws and anti parallex mirror. Complete with brass fittings, magnet and brass bar of same size and stirrup. It has got removable glass font.
With Pye type compass box which can be fitted on well polished plywood board, one meter long.
Gold Leaf Electroscope (Sheet Metal)
The metal case tends to eliminate vagrant deflections some times caused by charges residing on glass walls. The leaf support rod is the case are of glass to give good visibility.
Gold Leaf Electroscope (Glass Flask)
This practical and economical electroscope consists of leaf mounted on metal rod hold by rubber stopper in a conical flask. The shape of flask is such that it gives ample space for the leaf to diverge when charged.
The instrument has cup wheel consisting of three conical cups in a horizontal plane. The cup wheel spindle is of stainless steel and connected worm gearing to a revolution counter mounted in water proof housing. By observing the counter reading at the beginning and end of any period of interest the average wind speed during the interval can be calculated. The counter observing window is sloped to permit easy reading when mounted on the mast.
The unit is encased in a special aluminium case with standard stem of 9mm dia. It is fitted with high class optics. Light from two different sources falls on either side of a uniform opaque white screen. This light is reflected by side reflectors (Special prisms) and passes through the Lummer Brodhum cube. The field of view can be seen through a telescope and the light intensities are compared directly. The photometer is mounted in a swivel bracket for proper adjustment with two-nose lamp house & electric bulb is in a metal cased with cord & pin finished optical block.
Application/Usage :
Consisting of a brass Disc about 15 cm diameters, 6mm thick size with arrangement for clamping a split chuck without wall bracket.
For experiment on rigidity. Two solid and two hollow cylinders each 10cm long accurately fitting the bore of a hollow brass tube 40cm long are provided. The tube is also fitted with wire chuck and mirror, graduated scales and verniers on sliding weights. Complete with ceiling attachment without stand.
The validity of the law of conservation of energy is demonstrated using the Maxwell disk by converting potential into kinetic energy (Translation and rotational energy).
