Ashoktools Corporation

Vatva, Ahmedabad, Gujarat

We have developed "KARAM" High Precision Horizontal FLOOR TYPE BORING MACHINE which is most suitable for very heavy & High Volume Jobs which can't be accommodated on the work table of conventional Horizontal Boring Machine.

We have developed "KARAM" High Precision Horizontal FLOOR TYPE BORING MACHINE which is most suitable for very heavy & High Volume Jobs which can't be accommodated on the work table of conventional Horizontal Boring Machine. Such jobs can easily be handled with the Floor Boring Machine as the work-piece is kept on the Floor Plate/s provided separately with the machine. Additional ROTARY TABLE Attachment is also supplied as per customer's requirement. The design of machine is unique which ultimately provides stiffness, accuracy, precision and optimum output. The especially designed machine bed is wide enough to provide a very rigid base to the moving column. The geometrical accuracy of the machine conforms to Dr. Schlesinger's Acceptance Test Chart. The special feature of this machine is that a Variable Frequency Drive (AC DRIVE) is used for the Centralized Control of Vertical Movement of Head Stock as well as Horizontal Movement of Saddle carrying column. These infinitely variable speeds are further controlled by a potentiometer duly fitting the same on pendant board of the machine which also eliminates shifting of levers again & again. Centralized Lubrication System ensures proper lubrication to all the moving parts. Special Attachments like Milling Attachment, Threading Attachment and Taper Boring Attachments enable the machine to perform multi-operations. CNC Version of the machine can also be offered as per requirement.

1. The machine is complete with Full Electricals & duly equipped with Panel Board & Pendent Control Switch Board for the centralized control.

2. Gear Box for Auto-Feed Ram Head both Vertical & Horizontal is provided.

3. Alloy Steel duly hardened Gears are used.

4. Phosphorus Bronze Nuts are used for Lead Screws

5. 2.5mm Thick Turcite-B Lining is used on RAM/SADDLE.

6. Forced Lubrication with a Motorized Lubrication Pump is provided for the main Rotary Table. Independent Lubrication Pumps are provided for the Ram/Saddle & Cross Rail.

7. Precision Bearings and GUNMETAL guideways combination in the Bed/Table is provided to withstand Radial & Vertical Loads.

We bring forth for our clients Hand Shearing Machines, which are outfitted with four edge blades and handle. These user friendly and precision engineered machines are utilized for cutting sheets, rounds, flats, angle, bar and other. Our range is available in different models for different works and capacities. The machines we offer our are widely acclaimed for delivering high operation efficiency in various conditions and fulfilling various requirements of diverse industries.

we offer the most innovative, reliable Jiwan allGeared & Cone Pulley Shaping Machine with Automatic Lubrication system, ensuring full customer satisfaction. Leveraging our experience and expertise to provide revolutionary products, we have engaged ourselves in the manufacturing and export of high performance Shaping machines. Our Shaping machines are of sizes from12" 18" 24" 30" 32" 36" & 40".

we offer the most innovative, reliable Jiwan allGeared & Cone Pulley Shaping Machine with Automatic Lubrication system, ensuring full customer satisfaction. Leveraging our experience and expertise to provide revolutionary products, we have engaged ourselves in the manufacturing and export of high performance Shaping machines. Our Shaping machines are of sizes from12" 18" 24" 30" 32" 36" & 40".

We manufacture, supplies and export lathe machine, Light Duty Lathe Machine, Heavy Duty Lathe Machine and more

"Perfect Choice For Perfect Cutting"

Special Feature

• It can Cuts Round Bars, Square, Flas, Pipes, Angles, Channels & Structural Steel.
• It can cut various type of maerials like Mild Steel Stainless Steel, Brass, Copper, Aluminium etc.
• There is efficient Clamping Vice.
• It has precise & easy feed control.
• You can get fast & smooth cutting.
• Bi-metal cutting blade has optimum working capacity.

"Premier Solution for Welding"

Jagdish forced air cooled, welding Rectifiers, Deigned to provide DC welding current. They are built using state-of-the-art solid state technology to meet the stringent demands of high quality welding from todays fabrication industries including power plants, chemical process plans offshore works steel plans thermal power plants, mining and structural fabrications etc.

Jagdish also manufactures moving coil type D.C rectifiers too the machines are available in fully copper winding and aluminium winding too.

• QUICK FACILITY
• REMOT CONTROL UNIT
• SABLE ARC WITH EASY DOROPLET TRANSFER
• SUPER WELDING PERFORMANCE
• RELIABLE AND RPICAL DESIGN

SALIENT DESIGN

We offers Air Compressors, Screw Compressors, Vacuum Pumps, Borewell Pumps , After Cooler, Air Dryer, Air Receiver, On line Filter and Industrial Machines

• The working table executes only longitudinal movements, This ensures full contact and support from the machine bed, even in the table limit position. Vend flat guide ways are laminated with Trite 'B' to guarantee smooth table movement regardless of the load on the table.
• The column carries out only cross feed movement, this guarantees uniform contact between the column slide and machine bed in any column position. The column slide is guided by box type Trite 'B' lamented ways. hand scraped to obtain smooth stick slip free movements.
• Vertical slide ways and the grinding wheel, creating a perfectly perpendicular movement of the spindle in relation to the working table, The housing construction is also designed for better rigidity.
• The cartridge type spindle is supported by class 7 supper (CP4) precision angular contact ball bearings, preloaded and select-fitted into spindle cartridge. This will guarantee a maximum run out of 0.002mm for stable and accurate grinding m all the spindles are assembled at prayosha skilled and experienced technician in temperature-controlled clean room. The result is a spindle that will provide years of trouble-free service with minimum temperature changes, noise or vibration.

• (Option) A hydraulic overhead dresser is employed for column-traveling models, and is mounted on the spindle head to allow the wheel to be dressed independent of the grinding height or column position. The dresser device providers a minimum 0, 01mm graduation for productivity and ease of operation.
• The automatic lubrication system supplies lubricant to all of the guide ways and lead screws as the machine operates. This system ensures all the critical components are lubricated with the right amount of oil at all times.
• The external independent hydraulic tank is located outside the machine to be easily accessible for maintenance. A specially-designed valve and proximity switches enable smooth table reversing This is also prevent heat and vibrations from being transferred to the machine base.
• Electric components and function modules are well arranged and packed in a separated electric cabinet to be easily accessible for maintenance. An independent control box with an ergonomically designed panel offers a comfortable and convenient operation environment.

We bring forth for our clients Hand Shearing Machines, which are outfitted with four edge blades and handle. These user friendly and precision engineered machines are utilized for cutting sheets, rounds, flats, angle, bar and other. Our range is available in different models for different works and capacities. The machines we offer our are widely acclaimed for delivering high operation efficiency in various conditions and fulfilling various requirements of diverse industries.

Manufacturer, exporter and supplier of Drilling Machines. We offer PSL-40AAutofeed model, PSL-40, PRL-40, Round head model in same size andPSL-40X, Xtra Heavy model.

General Features

• Main spindle and pinion made from EN steel by forging.

• Column, arm, work-head & gears made from finest closed drain caster iron; while spindle ram trim alloy steel.

• Main spindle run out is checked for accuracy as per IS 2199.

• For the smooth sliding of sliding arm, special Slide-reliever-slots are given.

• All moving parts are fine-finished with grinding to a close tolerance.

• International technical if Taper wedge setting. For complete slide-setting instead of normal one point setting.

• Quality bearings with grease bath, so for permanent oiling.

• Main gear and pulley are perfectly balanced.

• Powder coated accessories for longer life and prevention of corrosion and pillage associated with usual chrome plating.

Excellent qulity machine with 26 years of experience
Available in 3 models (i)40mm (ii) 50mm (iii) 65mm
Continious Quality control to achive high quality
All parts Manufactured in one roof facilities

Spindle running in a set 3 nos. best quality bearing which permit heavy duty applications.
9 nos. spindle speed (50 to 805 RPM)
Radial arm swivels 360 degree
Specialist in 65mm (Extra Heavy duty)
Double Column Pillar
Accuracy movement with in 12 micron
Gear made in EN-23 material.