Kolkata, West Bengal, India
Our Products
Outter member made from 60.3mm od & inner member made from 48.3mm od m.s. pipes . Junior props are made from 50.8mm od & 44.4mm od m.s. pipes. Provided with nut with self cleaning notch.
|
||||||
| Prop | Closed | Extended | Closed | Extended | ||
| Junior | 2.00 | 3.10 | 1000 | 1500 | ||
| ON | 1.10 | 1.75 | 3500 | 3000 | ||
| 1N | 1.50 | 2.75 | 3200 | 2300 | ||
| 2N | 2.00 | 3.25 | 3000 | 2200 | ||
| 3N | 2.00 | 3.75 | 2900 | 2000 | ||
| 4N | 3.00 | 4.65 | 2300 | 1150 | ||
| 5N | 3.00 | 5.50 | ||||
The wire rope enabled aggregate conveying System transfers the aggregate and sand from the Batching system to the mixer. The bottom gate of the skip bucket opens on reaching the mixer so that the material can shift inside the mixer.
| TWIN SHAFT MIXER offers the most advanced mixing solutions, due to its counter rotating shafts creating a spiral shaped vertical and horizontal mixing ensuring a three dimensional mix for the best concrete quality. The height of the mixer is above 3.8 mtrs which makes it suitable for transit mixer feeding. |
Our bar cutters work on shear cutting technique and have proved to be much more cost efficient than other cutters.
36 cuts per minutes can be easily achieved making the work tremendously fast and fully automatic.
Unlike the disc cutters, the scrap metal left out is not in powder form and thus has a benifitting resale value
Specifications of Bar Cutting Machine:
| Model | GQ40C | GQ50C | |
| Diameter of Cutting Range (mm) | δ B≤ 450 mpa | Ø 6~40 | Ø 6~50 |
| δ B≤ 510 mpa | Ø 6~28 | Ø 6~40 | |
| δ B≤ 570 mpa | Ø 6~25 | Ø 6~35 | |
| Times of Cutting per Minute | 31 | 29 | |
| Stroke of Blade (mm) | 34 | 44 | |
| Space of Blades (mm) | 35~42 | 44~54 | |
| Power (KW) | 3 | 4 | |
| Speed (r.p.m) | 2880 | 2890 | |
| Voltage (V) | 380, 3-phase | 380, 3-phase | |
| Overall Size (LxWxH) (mm) | 1080x433x795 | 1240x550x1160 | |
| Weight (Kg) | 560 | 820 | |
| All the specifications above is only for reference, which will be changed without notice | |||
The measuring system is made up of cement, water and additives measuring hoppers. Each hopper is mounted on independent modular frame structure and the weighment can be done by individual electronic load cell for each.
The system combines the power of a PLC system and the accuracy of dedicated batch controllers to provide reliable and accurate control. The PLC system is one of the most advanced, with options like formula storage, alarm generation, manual over-ride on automatic mode of operation, software calibration for all scales with password protection and printing facility. The complete plant can be operated by a single control panel or computer system.
Screw conveyors are used for the transfer of cement from the feeding hopper to the discharge hopper. The screw conveyor uses electric motor for circulation of the screw, which results in carrying the cement to the discharge hopper.
| GUNITEis a process by which Plastering is sprayed at a high velocity. It is defined as mortar consisting of Cement and Sand, conveyed from the delivery equipment known as Gun through a hose and Pneumatically Forced through a nozzle where water is added at a high velocity onto a surface. The Force of the jet impacting on the surface compacts the material. A comparatively dry mix is gererally used so that the material is caplable of supporting itselg without sagging for vertical and overhead applications. | ||||||||||||||||||||||||||||||||||||||||||||||
|
| Well sinking, Pile Driving, Erection and Hoisting and suitable for working with Grab Buckets or Drop hammer. | ||
| Rolled Steel welded construction. Drums work independently. | ||
| Expansion type rotary clutch having positive action. | ||
| Carbon steel shaft. | ||
| Power Diesel Engine, (Electric Motor) | ||
| Self Aligning Heavy Duty Bearings. | ||
| All controls within reach of operator |
| Forged Teeth bolted with cutting edges. | ||
| M.S. welded cum bolted construction. | ||
| M.S. Deep Groove pulley Carton steel shaft. | ||
| Capacity 1.5 cu. Mtr., 1 cu. Mtr., 1 cu. Yd., 0.75 cu. Yd., 0.50 cu. Yd. |
| SKID Frame Type Frame made out of heavy steel sections. | |
| M.S. Gear & Pinion. | |
| Reduction through Gear Box and Bull Gear & Pinion. | |
| Carbon steel shaft. | |
| A Safety Ratchet System. | |
| Variable Speed Motor. | |
| M.S. Drums. | |
| Teeth Cut on Gear Hobbing Machine for Perfect Pitch. | |
| Hydraulic Thrustor Break. | |
| Manual Break. | |
| All controls within reach of operator. | |
| Load & Speed as per Requirement of the Customer |
|
| Bored Piling Winch are famous for its | ||||||||||||||||
|
Wall form shutteringpanels are manufactured from 12 swg. M.s. sheet with slotted 45 x 45 x 4/5 mm angle framed and stiffner. Channel or heavy duty sildiers are supplied in 2.5 mtr. X 100mm width. Heavy duty soldiers are to be used in place of channel soldiers for single sided shuttring.
| The wall form panels and soldiers are assembled together with tubes or channel walers by single clip and bridge clip. For curved walls flexible pannels are used insteade of wall panels. | |
| The figure shows assemble ready for 2nd pour with soldiers remaining in the same position. Wall ties remain embedded in first pour. For successive pours, complete assembly of panels soldiers and walings is lifted in convenient length. | |
| This system is being used for construction of r.c.c. walls , column, beams etc. Splay panel , haunch panel, internal corner panel and external cornar angle are also available. |
| . | DOUBLE ADJUSTER | 1000mm – 1250mm (L) 150mm – 225mm (W) |
| 2. | 90 EXTERNAL CORNER ANGEL | 1000mm – 1250mm |
| 3. | STANDARD – PANEL | 1000mm 2500mm 100mm – 500 mm |
| 4. | FLEXIBLE WALL FROM PANEL | 1000mm – 1250mm (L) 500mm (W) |
| 5. | 135 SPLAY PANEL | 10000mm – 1250mm |
| 6. | 90 INTERNAL CORNER PANEL | 1250 X 150 X 150mm |
| 7. | 100mm HEAVY DUTY SOLDIER | |
| 8. | 100mm CHANEL SOLDIER | |
| 9. | TIE BOLTS WASHER AND PLASTIC CONES | |
| 10. | ASEEMBLY BOLT/CLIP AND WEDGE CONNECT PANELS AND SOLDIERS. | |
| 11. | COIL TIES WATER SEAL TIE & LOOPS 12 & 20 dia . TIES IN LENGTHES TO SUIT WALL THICKNESS AND 100 & 150mm SINGLE AND 225mm DOUBLE LOOPS. | |
Slab forms are manufactured out of 14 swg or 12 swg. Sheet with pressed flanges and central stiffner. Available in 1150 x 600mm, 900 x 60mm and 800 x 600mm. Adjuster slab forms cover up the balance centreing area, thus eliminating wastage and cutting of timber altogether. Matching slots are punched on the flanges of the slab form.
| the ashok mini batching plant comes in two popular options rv800 and rv1050. Both the options are designed to give best mixing results with accurate weighing of sand, cement and aggregate along with digital display and control panel for easy operation. There is automatic water dozing system along with timer. It has a solid chassis fitted with 4 wheels for tow ability. | ||||||||||||
| key features | ||||||||||||
|
| Model | RV-800 | RV-1050 |
| Type | Reversible drum mixer | Reversible drum mixer |
| Unmixed capacity(L) | 800 | 1050 |
| Mixed capacity(L) | 600 | 850 |
| Total output(per hour) | 12 to 15 cu mt | 15 to 20 cu mt |
| Output (per batch) | 0.6 cu mt | 0.75 cu mt |
| Power (kW) | Crompton motor, 10HP 3-phase current | Crompton motor, 12HP 3-phase current |
| Weight | 2800 Kg. | 2800 Kg. |
| Over all dimension in mm | L4200 x W2000 x H3150. | L4200 x W2000 x H3150. |
| ||||||||||
| The drum rotates in one direction for mixing and in the opposite direction for discharging the concrete. There are two types of blades attached to the inner walls of the drum. One set drags the concrete upwards and towards the center of the mixer when the drum rotates in one direction; the second set of blades pushes the concrete towards the opening when the drum rotates in the other direction. The blades have a spiral arrangement to obtain this desired efect for discharging and mixing. |
| Model | AECC 350-8EH | AECC 350-6E | AECC 350-11E | |
| Total Power (KW) | 7.5 | 5.5 | 11 | |
| Power Source | Eletric motor, 3-phase, 380V, 50Hz | |||
| Unmixed Capacity (L) | 560 | |||
| Mixed Capacity (L) | 350 | |||
| Capacity | 10-14 m3 per hour | |||
| Dimensions (mm) | Length | 3100 | 2765 | 2980 |
| Width | 2140 | 2140 | 2140 | |
| Height | 3070 | 3000 | 3000 | |
| Weight | 1510 | 1420 | 1530 | |
| Hopper Lifting Model | Hydraulic | Steel Rope Hoisting | ||
| Tipping Hopper | Sliding Hopper | |||
A continuous discharge vacuum pump is a completely self contained unit. Two nos. matted areas can be dewatered in one single operation. The pump is powered by 7.5 H.P 3 Phase electric motor.
It is a surface finishing equipment powered by 3 H.P. electric motor through gear box. It polishes the surface after power floating.
A special high class nylon filter cloth with plastic mesh acts as very fine filter. Required sizes are provided with the system.
| Each machine is an independent system. Both the machines work in a sink. Highly swift, convenient and efficient. |
Screed Paver is a dual purpose concrete finishing machine. Consisting of a vibrator and screed finisher in one unit. It is light weight, portable and gives higher production and greater accuracy.
Powered by 4.4-HP 'Greaves' Diesel Engine or 5.5-HP 'Field Marshall Hatz' Diesel Engine 5-HP 440/3/50/AC (TEFC) Electric Motor.
Used for Concrete Bridge Decks, Concrete Roads, Canal Lining & Concrete Floors.
We are one of the most trusted names in the industry for manufacturing high quality engineering construction machines and equipments like Pan / Platform or Surface Vibrator which is widely applicable in various construction applications. We have a panel of experienced engineers in our company who are skilled enough to make best quality construction machines to satisfy our clients. We are committed to provide high class quality engineering products to our clients so these machines are tested on different quality parameters before implementing in market.
| Specifications | |||||||
| |||||||
| Features | |||||||
| |||||||
Made from 2.0 mm sheet, 10 and 14mm dia round and 40x40x6 mm Tee. Available in following sizes:
1.75 mtr To 2.70 mtr
2.40 mtr To 3.45 mtr
2.46 mtr To 4.15 mtr
3.05 mtr To 4.75 mtr
3.15 mtr To 4.90 mtr
3.15 mtr To 5.50 mtr
| Features : | |
| It is mechanically driven, hydraulically operated, easy handling, maintenance, and of dependable quality | |
| There are six speed choices of the tumtable to meet excavating requests in different layers | |
| The machine is equipped with hydraulic system, achieving : (1)The turntable and the hydraulic device together work to move the drilling tools of large diameters away from the piling (2)Derrick is conveniently driven by cylinder; The main winch and auxiliary winch is easily used alternately to improve the efficiency | |
| Easy handling and reliable operation of the winches with planetary gear system | |
| "n" type derrick, with guiding device, improving the verticality of the piling and convenient for drilling efficiency | |
| Using all kinds of drilling pipes, suitable for drilling for all kinds of torques. The drilling pipes, which can carry out the mud suction for direct and reverse circulation, as well as air-lift reverse circulation, realize high discharging and high drilling speed | |
| The base machine is fixed onto the base pedestal which can roll, it is convenient for aiming at holes and fixing the place. Reasonable design and compact structure. The machine is light and easy for transportaion | |
| It is widely used in all kinds of complex construction conditions, such as in land and on the water | |
| Easy for maintenance | |
When the hauling cable breaks, the safety hook will automatically arrests the fall.
Two-way outer-clamping rolling design allows the suspension cage to operate in a more flexible and steadier manner.
The single axle strongly built machine works on the principle of dry conveyance. the dry mix is transported from the feeding hopper through the rotors to the material exit. Different rotors are available for a variety of applications. Water is added in the spraying nozzle at the end of the hose. Provided with 2.2 KW (3HP) AC Electric Motor 440 Volt. Supplied with 31/50 mm hoses. Max. conveying distance of 250mtr and max conveying height of 60-75 mtr.
This machine is useful for gunite, shotcrete sprayed concrete and sand blasting.
| Consists of two verticals and one horizontal made of 48.3mm od tubes. lugs are welded at every 500mm on verticals to provide positive support to horizontal. horizontal is made from two three ways clamps welded to both ends of a pipe ledger tube has to be used to connet two or more aps units. | |||||||
| Advantages | |||||||
| |||||||
Made from 2.0mm sheet pressed type. Available in following sizes:
1150 x 600mm
900 x 600mm
800 x 600mm
Vibrations 3000 per min. Used for vibrating forms, shuttering of cast-in situ concrete, prestressed and precast units including electric poles, beams, channels and bulk material handling.
Pneumatic type - Vibrations 8000 per min. Most suitable for Tunnel Concreting. Also used for vibrating forms, shuttering of cast-in situ concrete, bulk material handling.
2-Ton, 3-Ton, 5-Ton & 7.5-Ton - Used for Bored Piles. Double drum winch also available.
Accessories for Bored Piling JobBailer, Rock cutting chisel, Tripod, Top guide casing, Bottom casing pipe, DMC Rod with sockets, Trimmie pipe with sockets Trimmie Funnel, Swivel for DMC Rod, Swivel for Trimmie pipe, Fore cutter (DMC chisel), Centrifugal Mud circulation pump etc. and all other accessories required for Bore Piling work. RMC method also available.
Double Bucket Scale type Concrete Batcher having capacity of 220kgs on each bucket, for coarse and fine aggregate with side discharge gate opening directly into Feed Hopper of 10/7 cft capacity concrete mixer resulting in no slippage.
Tilting Bucket Trolley on Rails System is a very economical way of transporting concrete / other materials from one place to another place. Tilting Bucket Capacity - 10 cft.
Rails - Straight length - 3mtr, 2mtr, 1mtr, Bends 90, 45 &30 in length of 3mtr, 2mtr & 1mtr.
Capacities available : 1/2m33/4m3& 1m3. mainly used for placing concrete in tunnel linings. This can also be effectively used in inaccessible locations like piers, silos, chimneys, cooling towers etc. This equipment is very useful in river valley projects as it expedites construction and save costs considerably.
Accessories required depending on requirement -a) Air Receiver Tank. b) 150mm dia steel pipe line with quick action couplings. c) Bends. d) Discharge Box.
ASHOK Concrete bucket is suitable to hook with crane or hoist.
It has direct discharge for speedy concrete pour and large mouth for easy quick filling. Useful for placing concrete at distant places/at heights/and inaccessible places with the help of crane.
Made from 2.5mm sheet and angle. Available in following sizes or any other size as per requirement:
1250 x 500mm
1000 x 600mm
c).Soldier (Heavy & Light)
Guniting / Shotcreting is the process of conveying desired mixer of dry cement, sand and/or aggregate under air pressure at a high velocity with just sufficient quantity of water for hydration. Equipment consists of a twin chamber gun and a twin water tank and is powered by an Air Motor. The material is deposited on the desired surface through a placing nozzle under a compressed air. These machines can also be used for sandblasting work by fitting on a sand blasting nozzle.
Uses : Construction of thin walls, New construction of thin sections such as shells, Canal and Tunnel Lining, Swimming Pool Lining, Repairing deteriorated Concrete and Concrete damaged by fire, chemicals or earthquake, Strengthening weak concrete structure such as buildings, bridges, jetties, Stabilizing rock and earth slopes, Refractory linings, Encasing steel for fire proofing, Protective coating over prestressed wires and steel pipes, Repairs of Hydraulic Structures such as water tanks, dam walls, To give rough surface texture where such is desired.
This machine is capable of cutting concrete and asphalt roads including reinforcement. Powered by 7.5 HP Electric Motor / 7.5 HP Diesel / Petrol Engine.
Maximum depth of cut : 100mm/150mm. Maximum width of cut : 3mm/4mm/10mm.
Made from 60.3 O.D. & 48.3 O.D.M.S. Black ERW Med ISI marked pipe. Available in following sizes:
1.5 mtr To 2.75 mtr
2.0 mtr To 3.25 mtr
2.0 mtr To 3.75 mtr
2.5 mtr To 4.25 mtr
3.0 mtr To 4.65 mtr
