Our Products
We offer a complete product range of CRI Centrifugal Monoblock Pump (CH, CS & BP Series), Honda Petrol Engine Water Pump (WS20X), Centrifugal Jet Self Priming Pump Set - CJS Series, centrifugal jet pump and CRI Centrifugal Monoblock Pump (ACM Series)
C.R.I. Centrifugal monoblock pumpsets volute chamber and impellers are designed to give the best possible hydraulic efficiency and good suctio lift characteristics. Most modern and highly sophisticated machinery and technology are engaged in manufacturing these pumpsets, using quality raw materials, dynamically balanced impellers and rotors to ensure long life. These pumpsets are powered by a totally enclosed fan cooled AC Induction two pole motor or four pole motor, suitable for continuous duty. Motor stator is made with low watt loss Silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enamelled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. These pumpsets require adequate motor protection control panel.
Applications :
Salient Features :
Pumped Liquids : Clean, thin, non-aggressive, non explosive, clear, cold, fresh water without, abrasives, solid particles or fiber having the following characteristics.
Specifications
Power Range | 2.2 kW -15 kW (3HP-20 HP ) CH Series 2.2 kW & 3.7kW (3HP & 5 HP) – DM Series 1.5 kW - 9.3 kW ( 2HP – 12.5 HP) –CS Series |
Speed | CH & DM Series -2880 RPM, CS Series -1440 RPM |
Versions | Three Phase, 380 -415V, 50Hz,A.C. Supply |
Degree of protection | IP 44 |
Class of Insulation | A, E,& B |
Direction of rotation | Clockwise viewed from Driving end |
Type of Duty | S1 (Continuous) |
Material Of Construction Of Motor
Part Name | CH Series | CS Series | DM Series |
---|---|---|---|
Pump Casing | Cast Iron | Cast Iron | Cast Iron |
Motor Frame | Cast Iron | Cast Iron | Cast Iron |
Impeller | Cast Iron / Bronze | Cast Iron | Cast Iron |
Shaft | Mild Steel | Mild Steel | Mild Steel |
Sealing | Gland Rope | Gland Rope | Gland Rope |
Characteristics Of Clear Cold Water
Permissible Amount of sand | 25 gm/m3 (max.) |
---|---|
Allowable solids | 3000 ppm (max.) |
Chloride ion density | 500 ppm (max.) |
Turbidity | 50 ppm silica scale (max.) |
Hardness (drinking water) | 300 (max.) |
Maximum liquid temperature | 33 oC |
Maximum ambient temperature | 40 oC |
Specific Gravity | 1.004 (max.) |
Viscosity | 1.75 x 106 m2/sec. |
Ph | 6.5 to 8.5 |
We offer Centrifugal Jet Self Priming Pump Set - CJS Series that features pump casing and ejector unit, which are designed carefully to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellow mechanical seal made of carbon & ceramic is fitted over the shaft, which is ground to close tolerance. Most modern and highly sophisticated machinery and technology are employed in the manufacturing of these pump sets using quality raw materials, dynamically balanced impellers and rotors to ensure long life. These pump sets are powered by a totally enclosed fan cooled and AC induction motor is suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame.
Dynamically balanced rotor of our Centrifugal Jet Self Priming Pump Set - CJS Series ensures vibrations and noise free operations as well as increases the life of bearing and seal. The varnish impregnated windings made of enameled copper wire offer excellent resistance. Shaft is made of quality steel, precision ground of sample size for transmitting the rated Horse Power. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. T.O.P (motor protector) is incorporated in all single-phase motors. All single-phase pump sets require an adequate motor protection control panel.
Applications :
Salient Features :
Pumped Liquids : Clean, thin, non-aggressive, non explosive, clear, cold, fresh water without abrasives, solid particles or fiber having the following characteristics.
Technical Specifications
Power Range | 0.37kW – 0.75Kw (0.5 HP – 1.0 HP) |
---|---|
Speed | 2880 RPM |
Versions | Single-Phase 220-240, V 50Hz,AC supply (Permanent spilt Capacitor – PSC) |
Maximum total head | Upto 45 m |
Maximum flow rate | Upto 1.1 mps (4 m3/hr) |
Degree of protection | IP 54 |
Directions of rotation | Clockwise viewed from driving end |
Class of insulation | B |
Maximum Suction Lift | 9 m |
Type of duty | S1 (Continuous) |
Nominal pumpset size in mm | 25x25 |
Characteristics Of Clear Cold Water
Maximum liquid temperature | 33 oC |
---|---|
Permissible amount of sand | 25 gm/m3 (max.) |
Chloride ion density | 500 ppm (max.) |
Allowable solids | 3000 ppm (max.) |
Specific Gravity | 1 |
Hardness (Drinking water) | 300 |
Viscosity | 1.75 x 105 m2/sec |
Turbidity | 50 ppm silica scale |
PH Value | 6.5 to 8.5 |
Material Of Construction Of Pump
Part Name | Material |
---|---|
Rear cover / Bracket | Cast Iron |
Motor frame | Aluminium |
Shaft | SS AISI 410 |
Impeller | Cast iron |
Pump casing | Cast iron |
Sealing | Mechanical seal (Carbon & ceramic) |
Centrifugal Jet Pump Set that we supply is the product engineered to provide perfect solution for various pump set problems. The volute chamber and impellers of Centrifugal Jet Pump Set is designed to provide the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a below mechanical seal made of carbon and ceramic is fitted over the shaft, which is ground to close tolerance. Pump sets are available in single stage, double stage and multi stages for various needs. Centrifugal Jet Pump Set is powered by a totally enclosed fan cooled (TEFC) and screen protected drip proof (SPDP), AC induction two pole motor suitable for continuous duty.
Motor stator is made of low watt loss silicon steel laminations. Dynamically balanced rotor ensures vibration and noise free operations and increases the life of the bearings and seal. The windings are of high-grade enameled copper wire and are varnish impregnated. Construction of motor frames and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A Thermal cutout relay (Motor protector) is incorporated in all single-phase pump sets require an adequate starter / motor protection control panel. Most of the models of our Centrifugal Jet Pump Set are specially designed to install the pump vertically above the borewell or horizontally at a little offset distance from the well according to customer's convenience.
Our Centrifugal Jet Pump Set is available in twin type and packer type versions. Packer type is suitable for 2" and 3" borewells and twin types is suitable for borewells with a diameter of 3 inch and above in twin type jet pump sets, there are two pipes, viz. Suction pipe and pressure pipe which connects the jet assembly to the pump. Pressurized water flows through the pressure pipe to the nozzle from the pump casing. Water sucked through the foot valve and the water passing through the nozzle mix together and flow through suction pipe into the pump, and for packer type jet pumps, the casing of tube well does the function of pressure pipe, ie., pressurized water through the tube well casing and enters the nozzle. Hence, one pipe eliminated.
Applications :
Salient Features :
Pumped Liquids : Clean, thin, non-aggressive, non-explosive, clear, cold, fresh water without abrasives, solid particles or fiber having the following characteristics.
Technical Specifications
Power Range | 0.37kW to 1.1 kw (0.5 HP – 1.5 HP) |
---|---|
Speed | 2880 RPM |
Versions | Single – phase 220 – 240V, 50hz, Ac supply (Permanent spilt capacitor – PSC). Three-phase 380 – 415V 50Hz, AC supply. |
Maximum delivery head | Upto 29m |
Maximum flow rate | Upto 3.1m3/hr |
Degree of protection | IP 44 |
Direction of rotation | Clockwise viewed from driving end, anticlockwise viewed from driving end (A18, A19, A40, A41 |
Class of insulation | A/B |
Maximum suction lift | 58 m |
Type of duty | S1 (Continuous) |
Nominal pumpset size (sunction x delievey x pressure) | 40x32x25, 32x25, 25x25x25& 25x20 x 25 mm |
Characteristics Of Clear Cold Water
Maximum liquid temperature | 33 oC |
---|---|
Permissible amount of sand | 25 gm/m3 (max.) |
Chloride ion density | 500 ppm (max.) |
Allowable solids | 3000 ppm (max.) |
Specific gravity | 1 |
Hardness (Drinking water) | 300 |
Viscosity | 1.75 x 108 m2/sec |
Turbidity | 50 ppm silica scale |
PH value | 6.5 to 8.5 |
Material Of Construction Of Pump
Part Name | Material |
---|---|
Rear Cover / Bracket | Cast Iron |
Motor frame | Cast iron / Aluminium |
Shaft | SS AISI 410 |
Impeller | Cast iron / brass |
Pump casing | Cast iron |
Sealing | Mechanical seal (Carbon & ceramic) |
C.R.I. Centrifugal Monoblock pumpsets volute chamber and impellers are designed to give the best possible hydraulic efficiency and suction lift. Sealing is by means of a bellows mechanical seal made of carbon and ceramic is fitted over the shaft, which is ground to close tolerance. These pumpsets are powered by a totally enclosed fan cooled Ac induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. Dynamically balanced rotor ensures vibration free and noise free operations and increases the life of the bearings and seal. The windings are of high-grade enameled copper wire and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. A thermal cutout relay (motor protector) is incorporated in single-phase motors. All single-phase pumpsets requires a adequate starter / motor protection control panel.
Applications :
Salient Features :
Pumped Liquids : Clean, thin, non-aggressive, non explosive, clear, cold, fresh water without abrasives, solid particles or fiber having the following characteristics.
Specifications
Power | 0.37 kW – 2.2 kW (0.5HP-3 HP) |
---|---|
Frequency / Speed | 50 Hz / 2880 RPM |
Version | Single phase 200-240V, 50Hz, A.C Supply, Permanent split capacitor (CSR) incorporated with thermal cutout relay (motor Protector). Three phase, 380 -415V, 50Hz, A.C Supply |
Maximum flow rate | 17.8 IPs (64 M3 / Hr) |
Maximum total head | 52.5 metres |
Maximum Operating Pressure | 5.25 Bar |
Degree of Protection | IP 44/ IP 54 |
Class of insulation | A & B |
Direction of rotation | Clockwise viewed from driving end |
Type of duty | S1 (continuous) |
Sealing | Mechanical Seal (Carbon & ceramic) |
Maximum suction lift in metre | 7 |
Maximum liquid temperature | 33oC |
Maximum ambient temperature | 40oC |
Nominal Pump size in inches(Suction & Delivery) | 1 x 1, 1¼ x 1, 1½ x 1¼, 1½ x 1½, 2 x 1½, 2 x 2, 2½ x 2, 3 x 2½, & 3 x 3 |
Material Of Construction
Part Name | Material |
---|---|
Pump Casing | Cast Iron |
Motor Frame | Cast Iron / Aluminium |
Impeller | Cast Iron / Stainless Steel |
Shaft | Stainless Steel |
Sealing | Mechanical Seal (Carbon & Ceramic) |
Characteristics Of Clear Cold Water
Maximum Liquid temperature | 33 oC |
---|---|
Permissible amount of sand | 25 gm/m3 (max.) |
Chloride ion density | 500 ppm (max.) |
Allowable solids\ | 3000 ppm (max.) |
Specific gravity | 1 |
Hardness (Drinking water) | 300 |
Viscosity | 1.75 x 106 m2/sec |
Turbidity | 50 ppm silica scale |
PH value | 6.5 to 8.5 |
We have achieved a position of prominence as a Supplier of Honda Petrol Engine Water Pump (WB 30 XT).
Details
Parameters | WB 30XT |
---|---|
Rated Output (HP) | 4.8HP/3600RPM |
Total Weight of pump sets in (Kg.) | 27 |
Max. Discharge (liter/Minute) | 1100 |
Size (mm) | 3’’×3’’ |
Max. Head (Meters) | 28 |
Fuel Starting | Petrol |
Running | Petrol |
Technical Specifications
PUMP | WB30XT DR |
---|---|
Intel/outlet diameter | 80 mm. (3 in ). |
Total head | 28 m |
Suction head | 8 m |
Max. pumping capacity | 1100 liters /min |
Self-priming time (at 5 m.) | 150 sec |
Length | 510 mm |
Width | 358 mm. |
Dry weight | 26 kg |
Rubber mounting | X |
hose band /strainer | 0 |
ENGINE | |
Model | GX160T1 |
Type | OHV |
Displacement | 163 cc. |
Max. power output | 4.0 kw (5.5 hp) / 3,600 rpm |
Oil alert | X |
Fuel tank capacity | 3.6 liters |
We are the leading Supplier of Honda Kerosene Engine Water Pump (WSK 2020). The Honda Kerosene Engine Water Pump has a maximum discharge of 600 liters per minute.
Technical Specifications
Parameters | WSK 2020 |
---|---|
Rated Output (HP) | 1.5HP/3600 RPM |
Total Weight of pump sets in (Kg.) | 18.5 |
Max. Discharge (liter/Minute) | 600 |
Size (mm) | 2”×2” |
Max. Head (Meters) | 20 |
Fuel Starting | Petrol |
Running | Kerosene |
The Honda Kerosene Engine Water Pump has a maximum head of 20 meters. The company is known as a renowned Supplier of Honda Kerosene Engine Water Pump (WMK 2520).
Technical Specifications
Parameters | WMK-2520 |
---|---|
Rated Output (HP) | 3HP/3600 RPM |
Total Weight of pump sets in (Kg.) | 35 |
Max. Discharge (liter/Minute) | 800 |
Size (mm) | 2.5’’×2” |
Max. Head (Meters) | 20 |
Fuel Starting | Petrol |
Running | Kerosene |