GST : 27AAOPJ8096R1ZH
Verified
Add Review
Our Products
Saw Pipe
2 Products availableErw Pipe
2 Products availableStainless Steel Pipes
2 Products availableMetal Pipes & Tubes
1 Products availableBrass & Copper Products
1 Products availableStorage Drums, Tanks & Containers
1 Products availableWe offer a complete product range of NICKEL ALLOY-INCONEL, NICKEL ALLOY-MONEL, Titanium, BS 3059 Part2 Pipes and DIN Pipes
Stainless steel 304 (18-8) is an austenitic steel having at least 18% chromium and 8% nickel, joined with a most extreme of 0.08% carbon. It is a nonmagnetic steel which cant be solidified by warmth treatment, yet. Must be cool attempted to get higher tough qualities. The 18% base chromium substance gives consumption and oxidation resistance. The combinations metallurgical attributes are created fundamentally by the nickel content (8% mm.), which additionally stretches out imperviousness to erosion brought about by lessening chemicals. Carbon, a need of blended advantage, is held at a level (0.08% maximum.) that is agreeable for most administration applications.
Stainless Steel 304 has astounding welding and profound drawing attributes it is anything but difficult to create, simple to clean and tastefully satisfying to the eye. The stainless steel composite opposes most oxidizing acids and will withstand standard rusting however this does not imply that the steel wont discolour over the long run. The steel needs to be frosty attempted to create higher elasticity. For stainless steel segments which are welded intensely, post-weld strengthening may be important to give most extreme destructive resistance.
CHARACTERISTICS OF STAINLESS STEEL 304:
TYPES OF STAINLESS STEEL 304:
| UNS No | Grade | C | Si | Mn | P | S | Cr | Mo | Ni | N |
|---|---|---|---|---|---|---|---|---|---|---|
| S30400 | 304 | 0.07 | 0.75 | 2.00 | 0.045 | 0.030 | 17.50/19.50 | – | 8.00/10.50 | 0.10 |
| UNS No | Grade | Proof Stress 0.2% (MPa) |
Tensile Strength (MPa) |
Elongation A5(%) |
Hardness Max | |
| HB | HRB | |||||
| S30400 | 304 | 205 | 515 | 40 | 201 | 92 |
Unlike 304L, Type 304H has a higher carbon content making the steel more suitable for use in applications where elevated temperatures are present. It is an austenitic chromium-nickel steel alloy and the greater carbon content delivers an increased tensile and yield strength.
The material is recommended for use in ASME pressure vessels in working service above 525 C due to the grades heat resistant properties.
Benefits of using 304H Stainless Steel304H alloy is commonly found in the oil refining, gas and chemical industry and is used in industrial boilers, pressure vessels, heat exchangers, pipelines and condensers. The material is also used throughout the power generation industry.
| UNS No | Grade | C | Si | Mn | P | S | Cr | Mo | Ni | N |
| S30409 | 304H | 0.04/0.10 | 0.75 | 2.00 | 0.045 | 0.030 | 18.00/20.00 | – | 8.00/10.50 | – |
| UNS No | Grade | Proof Stress 0.2% (MPa) |
Tensile Strength (MPa) |
Elongation A5(%) |
Hardness Max | |
| HB | HRB | |||||
| S30409 | 304H | 205 | 515 | 40 | 201 | 92 |
Inconel 600 is a nickel-chromium high temperature alloy with an excellent combination of high strength, hotand cold workability and high corrosion resistance. It has good high temperature strength up to 1150Cand displays freedom from stress corrosion.
The high chromium content of Alloy 600 raises its oxidation resistance, whilst the high nickel contentprovides good corrosion resistance under reducing conditions. The alloy also displays very good levels ofresistance to chloride stress-corrosion cracking, ammonia, pitting in fresh and salt water, exhaust gassesand most organic acids and compounds. Alloy 600 also performs well at cryogenic temperatures.
SPECIFICATION OF INCONEL 600:
UNS N06600
ASTM/ASME B 366
CHARACTERISTICSOF INCONEL 600:
PRODUCTS & MATERIAL STANDARDSOF INCONEL 600:
| Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
|---|---|---|---|---|---|---|---|
| 72.0 min | 14.0-17.0 | 6.0-10.0 | .15 max | 1.00 max | .015 max | .50 max | .50 max |
| Tensile Strength (N/mm2) | Proof Strees (N/mm²) | Elongation(%) | Hardness (Hv) |
| 550-690 | 240 | 30 | 121-273 |
Monel 400 is a nickel-copper alloy resistant to seawater and steam at high temperatures and widelyused in the chemical, oil and marine industries. As a solution strengthened material, it displays goodstrength, toughness and corrosion resistance at temperatures up to 400C.
Its corrosion resistance is particular strong in rapid flowing brackish water or seawater. Alloy 400 alsoexhibits good resistance to hydrofluoric and dilute non-oxidising acids, alkalis and salts. It also resistscorrosion by dry chlorine and hydrogen chloride and is not susceptible to stress corrosion cracking. Thisgrade is readily cold formable and weldable.
SPECIFICATION OF MONEL 400:
UNS N04400
ASTM /ASME B 366
CHARACTERISTICSOFMONEL 400:Excellent corrosion resistance in marine environmentsGood resistance to non oxidising acids, alkalis and saltsNot susceptible to chloride stress corrosion cracking
| C | Mn | S | Si | Ni | Cu | Fe |
|---|---|---|---|---|---|---|
| .30 max | 2.00 max | .024 max | .50 max | 63.0 min | 28.0-34.0 | 2.50 max |
| Tensile Strength (N/mm2) | Proof Strees (N/mm²) | Elongation(%) | Hardness (HB) |
| 480-600 | 170-415 | 20-35 | 35 HRC max |
Titanium Grade 1 is one of the gentlest and most pliable evaluations displaying the best formability. It has superb erosion resistance property, incredible weldability and is utilized as a part of a wide mixed bag of uses. This evaluation material is fundamentally utilized as a part of marine and concoction commercial ventures where the parts are subjected to extremely cruel situations. This material is additionally utilized for manufacturing anodes for cathodic assurance applications.
CHEMICAL PROPERTIES OF TITANIUM GRADE 1:
Keeping in mind their so many uses, we come up with different variants of Heat Transfer Pipes such as ASTM A 214/A 214 M – 96 Pipe, ASTM A 556 / A 556M-96 Pipe, BSI BS 3059-1:1987 Pipes. ISO 2604-II: 1975 Pipes, ISO 2604-III: 1975 Pipes, BSI BS 3606:1992 Pipes and many more. We are reckoned among the reputed Exporters and Suppliers of Heat Transfer Pipes from Maharashtra, India. Delivering retail as well as bulk orders for Heat Transfer Pipes on time has never been an issue for us due to our vast distribution network.
BS 3059 Part2 Pipes find their major application in hydrocarbon refineries, petrochemical and many other industries. We are one of the prominent Exporters and Suppliers of BS 3059 Part2 Pipes from Maharashtra, India. We choose those shipment modes that make possible for us to deliver pipes within the promised time frame. We entertain retail as well as bulk orders for Pipes. Moreover, we provide them at the most reasonable prices.
DIN Pipes can be used under the PED without restrictions. We are listed among the eminent Exporters and Suppliers of DIN Pipes from Maharashtra, India. We provide DIN Pipes in different variants such as DIN 1628 / St 44.4 Pipes, DIN 1626 / St 52.0 Pipes, DIN 1626 / St 44.0 Pipes, DIN 1615 / St 33 Pipes, DIN 17120 / St 37-3 Pipes, DIN 17120 / RST 37-2 Pipes and many more. We go for those shipment modes that make easy for us to deliver retail as well as bulk orders for DIN Pipes on time.
We make available BS Grade Pipes in different variants such as Bs6323-7/Saw 4 pipes, Bs6323 – 7/Saw 5 Pipes, Bs3602 – 2/Grade 490 Pipes, Bs3602-2 / Grade 430 Pipes and BS3601 / Grade 430 Pipes. We share glorious credentials in the list of top Exporters and Suppliers of BS Grade Pipes from Maharashtra, India. Due to our vast distribution network, it has always been an easy job for us to deliver retail as well as bulk orders for BS Grade Pipes on time.
API5L HSAW Pipes are extensively used in oil, natural gas and many other industries. We are named among the renowned Exporters and Suppliers of API5L HSAW Pipes from Maharashtra, India. Our range of API5L HSAW Pipes includes API 5L X52 HSAW pipes, API 5L x46 HSAW Pipe, API 5L x 80 HSAW pipes, API 5L x 70 HSAW Pipes, API 5L x 42 HSAW pipes, API 5L x 60 HSAW Pipes and many more. We entertain retail as well as bulk orders for API5L HSAW Pipes.
Structural Pipes that we offer are available in various cross sections, dimensions, chemical compositions and other relations specifications. Being one of the leading Exporters and Suppliers of Structural Pipes, we procure them only from the most reliable sources of the market. One can obtain Structural Pipes from us in different variants such as ASTM A 513-00 Pipes, BSI BS 1717: 1983 Pipe, ASTM A 512-96 Pipes, ISO 3306:1985 Pipes, DIN 2391-2:1994 Pipes, ISO 3305:1985 Pipes and many more.
API 5CT Tubes are highly demanded by petroleum and natural gas industries. We are enlisted among the reputed Exporters and Suppliers of API 5CT Tubes from Maharashtra, India. We procure API 5CT Tubes from the reputed vendors of the market. When it comes to deliver, we always deliver API 5CT Tubes within the promised time frame that makes us stand tall among our competitors.
Boiler Pipes are widely used in power generation boilers. We are named among the renowned Exporters and Suppliers of Boiler Pipes from Maharashtra, India. These pipes are sourced from the certified sources of the market. When it comes to delivery, we make all arrangements for quick shipment of Boiler Pipes. One can obtain Boiler Pipes from us at the most reasonable prices.
We are known as the well known affiliation offering a quality assortment of Seamless Tubes. Offered seamless tubes are fabricated by our hardworking labors by using high grade steel and modern technology as per the quality standards. Provided seamless tube is thoroughly examined by our quality department in order to assure its defect free range. Customers can take these pipes from us at nominal rates. Features: Precisely design Stout construction Rust resistant Specifications:
