ASAPP Info Global Services Pvt Ltd.

Navrangpura, Ahmedabad, Gujarat

MCR from Phoenix Contact, available in passive version MCR-SLP-1-UI-O-(-SW) convert sinusoidal alternating currents of 1 and 5 A into the analogue standard signals 0-20 mA and 0-10 V.

SFLS series is a super low profile DC-DC converter with height of 4.2 mm from Cosel. The wide line-up of super low-profile and highly efficient isolated surface-mount DC-DC converters includes 10 W-30 W/1.2 V-12 V output allows the user to select a product most optimal to the load.

Used in countless applications, welding systems made by the European market leader Rexroth are the first choice of satisfied car manufacturers, tier one suppliers, and welding equipment manufacturers worldwide. The new PS 6000 system for applications up to 360kA is the sequel to this success story.

Solar inverter, Model TN-1500 (1500 W) introduced by Meanwell comes with advanced digital control by microprocessor with true sine wave output (THD

The testo 745 non-contact voltage tester with a voltage range of up to 1, 000 V AC is particularly well-suited to fast initial checking of any suspected fault sources.

The Boiler Components Manufacturing Company is one of the leading manufacturers of high pressure Boiler Components.

The Flame Sensor, UV-01 is designed to detect UV radiations emitted by a naked flame. This sensor is used for detecting oil and gas flames with various viewing and mounting arrangements.

Airochem Engineering offers Boiler Fans. Various types and sizes of centrifugal fans for all applications catering to the needs of industries are available. For boiler application, they are nomenclatured as induced draft (ID) forced draft (FD) and secondary air (SA) fans.

Flexwell Equipments manufactures Boiler Tube Descaling Equipment. It is manufactured with indigenous and state-of-the-art technology. It is versatile.

M H Valves is one of the leading manufacturers engaged in supplying Sharp" brand Industrial Valves and Boiler Mountings.

A V U Engineers Pvt. Ltd. offers CI Gilled Economiser. CI Gilled Economiser is a mechanical devices intended to reduce energy consumption, or to perform another useful function such as preheating a fluid.

A V U Engineers Pvt. Ltd. offers CS Finned Tube Economiser. CS Finned Tube Economiser is used to remove excess heat of flue gases and preheat the water entering into Boiler to improve boiler efficiency.

Encon Enterprises fabricate highly effective, durable and modular Boiler Control Panels that come in diverse applications in the industry.

Nowadays ecological imbalance is posing a big challenge for mankind. The alternative to overcome this calamity is to use non-conventional energy resources such as solar and wind energy.

Isotex Corporation has earned a formidable reputation for its constant focus on quality, superior design and high manufacturing standards, for over two decades. It is this orientation that is reflected in its Ecotherm thermic fluid heater range.

SIECO Grease Cooking Kettles are designed and supplied in any sizes ranging from 1 kL capacity to 24 kL capacity (currently being the largest unit made by SIECO).

Electrotherm (India) manufactures induction furnaces, ladle refining furnaces, metal refining converters, induction heating and hardening equipments, continuous induction furnace and other specialised plant and machinery used in steel and foundry industry. The company offers a billet/long bar heater.

Sunrise Products, an ISO 9001-2000 certified company, is a manufacturer of electric heating elements for low and high temperature applications as per the specific requirement of customers at competitive prices.

Anupam Heaters & Controls manufactures heaters with CE mark. It now offers quarz halogen heaters (QHH).

Fabric Bra Cup Mouldsare able to mold rigid fabric cup, (non-stretch fabric) elastic fabric cup and space fabric, etc. These moulds are using conical shaped moulds with adjustable molding depth.

Waste Yarn Bobbin Cutting Machineis designed and developed for cutting waste yarn from bobbin of the tape plant machine. This machine is electro-mechanical integrative. This machine can cut the waste yarn from the bobbin by sharp and hot heated blades with high efficiency.

Capri Cables offers Heat Pipe Heat Sinks. These are used for cooling of semi-conductor power devices (Diodes, Thyristors, IGBTs), electronic assemblies, bus bars & optical cable junctions, control panels, servers & computers.

M P Engineering Co offers low air pressure oil fire burners. Size of burner: LAP 00; oil consumption in litre/hr 2-6.5; oil connection BSP; air connection 1 BSP; HP of blowers 1 min; blower capacity m3 5 min; total pressure in mm WG 450 min.

The Diesel Fired Oven can maintain temperature up to 200 C. The Oven is given a hammer tone paint finish. A wide range of sizes is available with a combination of different operating temperatures to suit the diversified requirements of the industry.

Lance Engineers & Consultants offers the next generation technology in immersion heating introduced by Process Technology, as their sole representative for South Asia. The patented PTC heater element lasts longer than conventional heaters.

Thermocouples are meant to sense the accurate temperature at heat application sites and transfer it to the control meter.

The Water Cooled Water Chiller represents the ideal solution for the water cooling of Industrial process Water Systems & designed to facilitate quick installation. The size ranges from 5-Tr to 150-Tr.

The Dew Point Apparatus is the most economical, simple, errorless system for spot-checking of dew point temperature of any compressed air/gas. This consists of a closed cylindrical glass with two chrome-plated tubes, a low range thermometer (-50 to +40C) and a dry ice maker.

The Refrigerant Recovery System is a fully automatic and effective ready to use recovery system with power range from 120 watts to 800 watts. It has a volumetric capacity range from 4-6KG/HR to 40-45KG/HR.

Cold Rooms comes from Mellcon Engineers, an ISO-9001-2000 certified company, is pioneer in the development and manufacture of environment friendly, prefabricated modular energy efficient walk-in-cold rooms in India.

The Hot Air Blower is a heavy duty, industrial quality and portable device. It is available in three different temperature ranges of 150C, 260C and 400C, having power rating of 1200 W, 1680 W and 2160 W respectively.

Lance Engineers & Consultants provides electric heating, sensing and control solutions for a variety of industrial applications. The company offers HTS/Amptek flexible heating tapes for industrial and laboratory applications.

Watlow Thermal Solutions India Pvt Ltd offers the Series F4 1/4 DIN industrial Ramping Temperature Controller that meets the requirements of the most demanding ramp soak controller processing applications.

Watlow Thermal Solutions India Pvt. Ltd. offers Mineral Insulated Thermocouple. Watlow's mineral insulated thermocouples are fast- responding, durable and capable of handling higher temperatures.

Prism offers drying and baking ovens with lowest fuel consumption. This is achieved with the use of optimum airflow design, gravity air seal with elevated ovens, special double tongue and groove panel design, high-density insulation and more.

Nutech Jetting offers Hot Air Generator, Kx20. It a direct-heating hot air generator operated with kerosene and fuel. It is completely automatic and is equipped with a compressor pneumatic pulverization burner. It is made up of stainless steel and has a combustion chamber.

The Boiler Components manufactures Spiral Coils, which are fabricated out of carbon steel ERW and seamless and alloy steel tubes. These spiral coils are used in oil fired boilers or thermal fluid heaters.

Advantages

• Rigorous avoidance of temperature bridges in hot or cold pipe work.
• High insulation effect, low effective density.
• Prevents the formation of condensation on the pipe clamp.
• Vapour barrier due to the aluminium facing.
• Good adhesion between shell and vibration lining due to releasing agent-free surfaces.
• Longer shell lengths are available if the vapour barrier is required to overlap within the region of the butt Joints Load-distributing sleeves are available for improved spreading of the load.
• Insulation shells and pipe clamps with DMMGULAST lining are matched to fit exactly.
• Average vibration reduction of up to 22.7 dB (A).

Application

• Thermal decoupled pipe support in the field of refrigeration
• Especially suitable for attachments in ventilation, air-conditioning, heating, refrigeration installations as well as for chilled water pipes.

Technical Specifications

• Insulation thickness: 30 mm
• Part no.: 124408
• Shell material b x s [mm]: 25 x 2.0

Rajamane Industries offers Chip Cutting Pumps, SFC 850-1150 Series. These are designed to over come the aluminium chips bundling problem. Most of the today"s automobile machining involves aluminium. These aluminium chips generated though machining forms in a ball, making it difficult to filter or break. These SFC series pumps breaks this ball of aluminium chips, cuts them into small pieces and pumps out for filtration.

Advanced Materials & Tribology offers Process Pumps. It is used for graphalloy refinery process. It is of L-single stage overhung type. It pumps HF acid, which is one of the most dangerous products pumped in a refinery.

Agnee Engineering offer drum heating ovens for heating/melting heat sensitive material in drums at a constant temperature in drugs, agrochemicals, chemicals and allied industries

Advantages

• High-performance anchor point attachments with outstanding structure-borne noise reduction of up to 30 dB(A)
• High loading capacity in all directions
• Time-saving fitting due to only one connection thread on each side
• Adjustment using threaded pins or rods
• Security provided by undercut vulcanised-in anchor
• Effective isolation of vibrationcoupling using vulcanised-in MPROLAN
• Silicone-free

Applications

• Ideal for vibration controlled fixing of devices such as boilers, pumps, motors, air-conditioning and ventilation systems; also vessels, MPCSupport channels, etc.
• Suitable for ceiling, wall or floor mounting
• For sound-decoupled pipeline fixed points
• The ideal component for vibration controlled elevating devices to meet the vibration control requirements of DIN 4109 and VDI 4100
• Various mounting options when used with cross beams and frames made of MPC-Support channels: stable, versatile and optionally expandable

MUPRO offers Pipe Clamps - EuroQuick, galvanised.

Advantages

• With highly elastic insert
• Captive fastening screws
• High rigidity thanks to reinforcing rib
• Temperature range from -50 C to +110 C
• Fastening screws with combination cross-head
• Safe handling thanks to rounded flange
• Clip-over edges and the guide rib of the pipe clamp insert ensures a secure hold and prevents it from being pushed out

Application

• Suitable for fixings in housing and industrial areas
• Suitable for fastening of drinking water and heating pipes
• For indoor use

Advantages

• Size range from " to 8"
• Made of carbon steel
• Galvanised, other finish available upon request
• Easy height adjustment due to knurled nut
• Complies with Manufacturers Standardization Society MSS-SP-58 and MSS-SP-69 (Type 10)
• Approved by FM and UL

Application

• Attachment of sprinkler lines

Advantages

• Design similar to DIN 3570
• Standard material S235JR (St37) acc. to DIN EN 10025
• Electrolytically galvanised
• Supplied with 4 nuts acc. to DIN 934. In the M8 to M12 versions, also with 4 washers

Application

• For simple pipe attachment in building technology and industrial construction

Advantages

• Ideal solution for attachment of MPR-Support channels to steel girders
• Allows subsequent adjustment of the channels along and across the supporting beam
• Suitable for all flange thicknesses of common support profiles ( ? 24.5 mm)
• Easy to install, pre-assembled kit
• Proper attachment of suspended loads on girders

Application

• For flexible attachment of hangers on inclined girders and flanges

Technical Specifications

• Thread: M6
• Spanner Size (mm): 10
• Length (mm): 20, 30
• Part no.: 105733

Advantages

• Secure grip due to controlled splaying as the taper is driven in
• Requires only small drilling depth
• Flush finish with surface of the building material
• Secure expansion force even when the mounting screw is loosened
• European Technical Assessment (ETA) for non-cracked and cracked concrete (reduced loads)
• If used the setting tools for check marking, test loading of the anchor is not required

Application

• For anchorages of medium-weight loads in concrete and natural stone (hard) in dry interiors of buildings
• Versatile and suitable for attachment with screws or threaded rods in all plumbing, heating and ventilation installations

Advantages

• Thread: M6, M8, M10, M12, M16, M20
• Length [mm]: 1, 2, 3
• SAP_VPE: 5, 10, 15, 20, 25, 50, 100