A Saluji Engineering Works

Jogeshwari, Mumbai, Maharashtra

We are the renowned manufacturers and suppliers of Manifold Valves, which are manufactured using premium quality stainless steel, carbon steel and duplex stainless steel materials. We offer Manifold Valves in various dimensions and specifications as per the client’s requirement.

• Easy to install
• Low to maintain
• High durability
• Trouble free performance
• Rust free

• Chemical
• Petrochemical
• Oil

• Connection: 1/2" Female NPT to 1/2" Female NPT
• One-piece, high strength body construction for safety no welding used.
• Stems feature an non-rotating top with an easily replaceable soft insert.
• Bonnet lock pin prevents accidental valve disassembly
• 316 stainless steel constructions for superior corrosion resistance.
• Bonnet-to-body seals are metal-to-metal-no O-Rings used.
• Mounting holes provided for self supporting applications.
• 100% pressure tested for shut-off and at all seals.
• Manifolds feature at 4:1 safety factor
• 2-1/8" (54mm) Port centerline dimension for proper alignment.

Types of Manifold Valves Available : 2 Way Manifold Valves : 2 -Valve Manifolds offer safety and reliability in a general purpose design. The simple 2- Valve Configuration allows for easy block, bleed and calibration of a static pressure transmitter or gauge. Valves are available with either metal seats or replaceable soft seat inserts. Connections are 1/2 female NPT on all three ports. 3 Way Manifold Valves : The A Saluji Engineering Works Pipe to Pipe 3-Valve Manifold is a general purpose design for connection system impulse lines and transmitters. This manifold consists of two block Valves and an equalizer valve. Connection are 1/2" Female NPT on 2-1/8" (54mm) centers for safety, an bonnet lock pin is standard. 5 Way Manifold Valves : 5-Valve Manifold offer two mainline block valves and a double block and bleed valve for the equalizer line. The manifold is primarily intended for gas service and is used to connect differential pressure transmitters to system flow meters. Connections are 1/2" Female NPT on 2-1/8" (54mm) centers Standard feature include two 1/4" NPT static pressure connections on the instrument side and one 1/4" NPT vent connection from the bleed valve.

We manufacture and supply top quality Needle Valves as per the industry standards & specifications. Our range of Needle Valves is produced from advanced technology and goes under strict testing at various stages of production. These valves are available at reasonable prices.

• High durability
• Corrosion resistive
• High performance
• Easy to use
• High tensile strength

• Hydraulics & Pneumatics
• Oil & Gas
• Water Systems
• Pharmaceuticals

• Pressure rating up to 5000 psi (340 bar) at 380C (1000F).
• Temperature rating from -530C (-650F) to 2320C (4500F) with standard PTFE packing, up to 3150C (6000F) with Graf oil packing.
• Materials : Standard 316SS and Brass.
• Forged body with straight and angle pattern.
• Panel mounting without packing disruption.
• Wide choice of end connection : A Saluji Engineering Works Tube Fittings, Male & Female NPT or PT (ISO 7/1) thread, Socket Weld ANSI/ASME B16.11.
• Standard lubrication : Nickel anti-seize lubricant (Hydrocarbon carrier
• Standard seat : Metal to metal/body material.
• Optional sea : Metal to metal/satellite, hard coating, soft seat.

• Standard Factory Test: Every needle valve is 100% factory tested with air and nitrogen at 1000psi (69bar) for leakage at the seat and packing. Each test is performed to maximum allowable leak rate of 0.1sec/min.
• Optional Hydrostatic Test: This hydrostatic shell test is performed with pure water at 1-1/2 times of the working pressure. Other optional tests are available upon request.

We offer a wide array of Check Valve, which is used in various industries. These steel made Check Valves are appreciated for their high durability and efficiency. This check valve is available in different specifications.

• Ensure safety
• Trouble-free performance
• Valve function
• Materials compatibility
• Adequate ratings
• Proper installation
• Operation
• Maintenance

• Pressure rating up to 3000 psi (206 bar) @ 210C (700F).
• Temperature rating from -200C (-40F) to +1900C (3740F) with special seals.
• Fixed cracking pressure.
• 316 stainless steel
• Wide choices of end connections : Tube Fittings, Male & Female NPT or ISO 7/1 thread.

• Every valve is 100% factory tested for cracking and reseals performance.
• Other optional tests are available upon request.

• Process control
• Instrumentation
• Flow control applications

We are the renowned manufacturers and suppliers of Industrial Manifold Valves, which are manufactured using premium quality stainless steel, carbon steel and duplex stainless steel materials. We offer Manifold Valves in various dimensions and specifications as per the clients requirement.

Features :

• Easy to install
• Low to maintain
• High durability
• Trouble free performance
• Rust free

• Application in various industries :

  • Chemical
  • Petrochemical
  • Oil

  • Specifications :

    • Connection: 12" Female NPT to 12" Female NPT
    • One-piece, high strength body construction for safety no welding used.
    • Stems feature an non-rotating top with an easily replaceable soft insert.
    • Bonnet lock pin prevents accidental valve disassembly
    • 316 stainless steel constructions for superior corrosion resistance.
    • Bonnet-to-body seals are metal-to-metal-no O-Rings used.
    • Mounting holes provided for self supporting applications.
    • 100% pressure tested for shut-off and at all seals.
    • Manifolds feature at 4:1 safety factor
    • 2-18" (54mm) Port centerline dimension for proper alignment.

    • Types of Manifold Valves Available : 2 Way Manifold Valves : 2 -Valve Manifolds offer safety and reliability in a general purpose design. The simple 2- Valve Configuration allows for easy block, bleed and calibration of a static pressure transmitter or gauge. Valves are available with either metal seats or replaceable soft seat inserts. Connections are 12 female NPT on all three ports. 3 Way Manifold Valves : The A Saluji Engineering Works Pipe to Pipe 3-Valve Manifold is a general purpose design for connection system impulse lines and transmitters. This manifold consists of two block Valves and an equalizer valve. Connection are 12" Female NPT on 2-18" (54mm) centers for safety, an bonnet lock pin is standard. 5 Way Manifold Valves : 5-Valve Manifold offer two mainline block valves and a double block and bleed valve for the equalizer line. The manifold is primarily intended for gas service and is used to connect differential pressure transmitters to system flow meters. Connections are 12" Female NPT on 2-18" (54mm) centers Standard feature include two 14" NPT static pressure connections on the instrument side and one 14" NPT vent connection from the bleed valve.